Nexo IDT-QRA-V2 Manuale operativo
www.nexo-sa.com
ZA du pre de la Dame Jeanne
60128 PLAILLY-France
- Read this document before using.
- Keep this document.
- Observe all warnings and cautions.
PAGE 1 OF 4
IDT-QRA-V2
DP2356/Rev01a - DI
Quick Release Clamp
Contents:
Safety: Use the sling and the quick link to
secure with the free hole.
X1
X1
X1
Weight: 0.4 kg / 0.88 lb
www.nexo-sa.com
ZA du pre de la Dame Jeanne
60128 PLAILLY-France
- Read this document before using.
- Keep this document.
- Observe all warnings and cautions.
PAGE 2 OF 4
Dimensions:
3,0
75
4,3
110
3,6
92
0,4
10
Implementation:
QRA can be moved in 2 different positions on 5 locations.
You can find 5 locations, 2 to use horizontally and 3
vertically.
Insert QRA and push until the locking device locks
automatically.
Pull up the locking device and push QRA to remove it.
www.nexo-sa.com
ZA du pre de la Dame Jeanne
60128 PLAILLY-France
- Read this document before using.
- Keep this document.
- Observe all warnings and cautions.
PAGE 3 OF 4
Use:
Use the levers to lock QRA on ID24
Tilt: Loosen the wing nut to adjust the angle (-45° to +45°).
www.nexo-sa.com
ZA du pre de la Dame Jeanne
60128 PLAILLY-France
- Read this document before using.
- Keep this document.
- Observe all warnings and cautions.
PAGE 4 OF 4
Warning :
Negative tilt: locking device towards the front of the cabinet.
Positive tilt: locking device towards the back of the cabinet.
NEXO cannot accept responsibility for accidents caused by any factor other than defects in this product itself.
Please check the web site www.nexo-sa.com for the latest update.
Indice
