Next Level UM-1 Manuale utente

USER MANUAL

Limited Warranty

JS Source Technology, LLC guarantees the UM-1 / UM1-A to be free of

defects for the product’s warranty period of 5 years.

The warranty period begins on the original date of shipping. The lim-

ited warranty is intended only for the original purchaser. The warran-

ty will be void if the bracket is modified in anyway or not installed cor-

rectly, Including overloading, abuse, or use for any purpose other than

specified in these directions. The UM-1/ UM1-A is for indoor only and

any use outdoors will void this warranty.

JS Source Technology, LLC is not liable for any damage or injury

caused from the use of or the inability to use our bracket. To the maxi-

mum extent permitted by applicable law, JS Source Technology, LLC

disclaims any responsibility for incidental or consequential damages.

DISCLAIMER: Next Level Acoustics has NO affiliation with

Sonos, Inc. Sonos®, Playbar®, and ARC® are registered trade-

marks of Sonos, Inc.

Next Level UM-1 Bracket

Thank you for purchasing the UM-1 mounting bracket. Please read the di-

rections thoroughly and plan how the mount would be best installed for its

intended use. Failure to do so may result in Damage, Personal Injury, or

voiding the warranty. It is the installer’s responsibility to ensure all compo-

nents are properly installed. Next Level Acoustics is not responsible for any

damage or injury resulting from improper mounting or use of the UM-1

bracket.

These instructions are only a guide and the installer is responsible for the

correct and secure mounting of all associated products. Please follow all

manufactures instructions for any product being installed with the UM-1

bracket. Please note: Each Setup will be different and these directions may

not account for every situation. The person installing the bracket should have

experience mounting load bearing assemblies. For any questions or con-

cerns, please contact technical support at Next Level Acoustics at 617-237-

2875 or [email protected].

CAUTION: The UM-1 is intended for use only

with the maximum weights denoted below. Use

with heavier than the maximum weight indicated

may result in instability causing possible serious

injury or damage. Review all relevant manuals to

ensure that the setup can handle the load.

 12-15 lbs. when mounting above the TV using the stock TV stand

(max weight varies depending upon how wide the stock TV base

is)

 12-20 lbs. when mounting above the TV in conjunction with a TV

mount

 30 lbs. when mounting below the TV in conjunction with a TV

mount

DISCLAIMER: Maximum weight measures are only

guidelines and ARE NOT absolute! Use precaution

when mounting.

Specifications

 Shipping Dimensions: 22” x 4” x 4”

 Shipping Weight: 4 lbs.

 Bracket Weight: 3 lbs.

Parts Included

 (1) UM-1 Left and Right Bracket Assemblies (Sandwich, Vertical,

Depth)

Hardware Included

 (4) #10 Nuts and (4) 1/4” Nut

 (4) #10 Bolts and (4) 1/4” Bolts

 (4) #10 5/8” Screws and washers (mounting to Elite and Fusion

products)

No Longer Included (For mounting the Playbar directly)

 (4) Steel Phillips Flat Head Screw (82 Degree Countersink Angle,

10-24 Thread Size, 3/4" Long)

PLEASE READ: May require spacers between the UM-1 and TV

mount, when using lower profile mounts (sub 2.5″from wall to back of

the display) due to the increased depth adjustment capabilities of this

bracket system

Mount Uses

 The UM-1 is designed and tested to mount a Fusion Series Soundbar, or

Elite Closed Back Enclosure below the TV when using a TV mount within

weight guidelines

 The UM-1 is designed and tested to mount a Sonos® Playbar® Wall Mount

Kit and SONOS® Playbar above or below the TV when using either the TV

stand, or in conjunction with a TV mount within weight guidelines. Sup-

ports 300mm, 400mm and 500mm TV VESA spacing

 Mounting the SONOS® ARC® directly to the TV when using the UM1-A

adapter bracket

 The UM-1 may be used to mount a third-party Center Speaker or Soundbar

above or below the TV depending upon the mounting mechanism. Please

note, Next Level Acoustics makes no guarantee that the UM-1 bracket will

work with un-tested third-party products. All weight guidelines must be

followed

How to build the UM-1 Bracket System

 Assemble the UM-1 following the Figure 1 Bracket Setup diagram

below using the provided parts and hardware

 Please note: There are left and right side parts to this assembly

(Vertical Support/Depth Support)

 Once assembled, the UM-1 bracket locations can be swapped to fit an

assortment of required installations

Height Adjust-

ments

 Height Adjustment is

achieved by removing the

#10 Bolts as needed and

sliding the Vertical Support

up and down on the Sand-

wich Support. For the sturdi-

est setup keep the #10 Bolts

as far away from each other

as possible

 The Depth Support can be

adjusted by loosening the

1/4" Nuts with a 7/16”

wrench. The Depth Support

can also be swapped around

to achieve additional depth

adjustment, see Figure 2 and

Figure 2a for more details

Figure 1 Bracket Setup

Depth Adjustments

 Choose the proper depth adjustment permutation to perfectly line up the

Center Speaker, Soundbar, or Enclosure with the top or bottom edge of

the TV

**You can also swap the Depth Supports to the other

side of the bracket to achieve different anchor points**

Forward adjustment when the Depth Support

has clearance to move past 0

Figure 2

Figure 2a

Tilt Adjustments

 Choose the proper tilt adjustment angle to perfectly line up the Center

Speaker, Soundbar, or Enclosure with the top or bottom edge of the TV

Mounting Basic Recommendations

 Elite Series (Closed Back) Below the TV—Secure to the UM-1

Bracket Depth Support using two per bracket #10 5/8” long screws

and associated washers per bracket (included)

 Fusion Series Soundbars Below the TV—Drill a pilot hole and se-

cure to the UM-1 bracket Depth Support using two #10 5/8” long

screws and associated washers per bracket (included)

 SONOS® Playbar mounted above or below the TV using the

SONOS® Playbar Wall

Mount Kit—Secure the

SONOS® Playbar Wall

Mount Kit bracket to the UM

-1 using (4), two on the top

and two on the bottom, #10

3/4” flat head 10-24 machine

screws with applicable wash-

ers and nuts (not included).

Depth Supports must be

mounted to the Sandwich

Support in the outside posi-

tion (page 9) in order work

at 300mm, 400mm and

500mm TV VESA spacing

 SONOS® ARC (page 10)

Attaching to the TV

When using the TV manufacturers stand

 Determine the optimal bracket placement and line the Sandwich sup-

port’s oval holes with the threaded holes on the back of your TV. Se-

cure the Sandwich Support to the back of the TV using the TV manu-

facturers recommended hardware

 If your TV has bump outs, spacers

may be needed. (Spacers are not

included)

When mounting the TV to the wall

 Mount the Sandwich Support be-

tween the TV Mount and the TV.

Make sure all 4 screws go through

the Sandwich Support and anchor

snugly into the threaded holes on the

back of the TV. Spacers may be

needed if the Sandwich Support in-

terferes with the TV Mount. For

most dual hanger style TV brackets

spacers will not be needed

 If your TV has bump outs, spacers

may be needed. (Spacers are not

included)

** Before mounting, consult

your TV’s owner manual / TV

mount’s manual and follow

all safety precautions.

Mounting above the TV example

Mounting below the TV example

Brackets can be swapped

Mounting your SONOS® ARC using the

UM1-A adapter bracket

 Supports 300mm to 600mm VESA patterns

 Mount the L/R sides of the UM-1 bracket to the back of the TV fol-

lowing steps on page 8

 For 600mm spacing, swap the UM-1 Sandwich brackets so that the

attached Vertical brackets mount going towards the center of the

display. This will allow the UM1-A to reach the threaded insert on

the SONOS® ARC

 Please note: The UM-1 (sandwich, vertical, and depth supports)

and UM1-A adapter brackets may be flipped in various ways

providing additional adjustment options. The right placement will

depend upon your application

 Remove the single slot

depth support brack-

ets from the UM-1, but

make sure to keep the

carriage bolts and nylon

nuts

 Replace with the UM1-

A adapter bracket using

the 1/4” carriage bolts

and nylon nuts you re-

moved

 Secure the UM1-A adapter

bracket to the back of the

SONOS® ARC by using the

provided hardware in this

recommended order: 18mm

M5 bolt, lock washer, flat

washer, fender washer and

then into the SONOS® ARC

using the hex key. We

strongly suggest two people

perform this action to ensure

that you do not drop the

SONOS® ARC while secur-

ing to the UM1-A

 Use the Height, Depth/Forward, and

Tilt adjustments to place the

SONOS® ARC in your desired loca-

tion and lock into place using the ny-

lon nuts (do not over tighten)

 When using a Tilt Mount—Use the Tilt adjustment feature to re-

level the SONOS® ARC so that the Atmos drivers fire up from a

level plane

Do not mount the SONOS® ARC above the TV

Mounting SONOS® PLAYBAR using

PLAYBAR® Wall Mount Kit

Altri manuali per UM-1

Indice

Altri manuali Next Level Supporto TV

Next Level

Next Level UM-1 Manuale utente

Manuali Supporto TV popolari di altre marche

Ergotron

Ergotron Neo Flex Cantilever UHD Manuale utente

StarTech.com

StarTech.com FPCEILBTB Manuale utente

VonHaus

VonHaus 05/038 Manuale utente

Techlink

Techlink ECHO TV Manuale utente

Sandstrom

Sandstrom SSTVMC12X Manuale utente

Sony

Sony SU-WL700 Guida

ICW

ICW SCACC18 Manuale utente

LG WM-L640V Manuale utente

Gembird

Gembird WM-65ST-01 Manuale utente

ERARD

ERARD FiTUP XXL 035320 Manuale utente

PEERLESS

PEERLESS PLCK-1 Guida

Kanto

Kanto RCF180 Manuale utente

GEM

GEM GEM GP001 Manuale utente

Gladiator Joe

Gladiator Joe GJ0A0053 Manuale utente

Vivotek

Vivotek AM-105 Manuale utente

Vivo

Vivo VESA STAND-VAD1B Manuale utente

AmazonBasics

AmazonBasics B07QG3LMG4 Manuale utente

Secura

Secura QLF210 Manuale utente