Next Wave Automation SHARK SD100 Manuale utente
Shark SD100
(Barracuda)
User’s Manual
®
2Shark SD100 (Barracuda) User’s Manual
Copyright 2020 Next Wave CNC
All Rights Reserved.
Shark SD100 (Barracuda) is the registered trademarks of Next Wave CNC.
Ready2Control-Basic is copyrighted by Next Wave CNC. All rights reserved.
All other trademarks are the property of their respective owners.
Information in this manual is subject to change without notice.
The newest version of this manual can be
downloaded from the Help menu in the
Ready2Control-Basic software –see page 34
The Shark SD100 (Barracuda) comes with the unique opportunity to trade
up to a larger Shark HD model. If you outgrow your Shark SD100
(Barracuda) and decide to trade it in on the purchase of a larger Shark HD
model, your Shark SD100 (Barracuda) will be refurbished by Next Wave CNC
and donated to a school (in your name) in cooperation with The MiLL
National Training Center, Colorado Springs, Colorado. (www.themillco.org)
Please save the original box to help facilitate shipping if you
plan to upgrade.
For further details contact tradein@nextwaveautomation.com
3
04/2020
To Our Customers ………………………………………………….…………………..… 4
System Requirements ……….………….…………….…………….…..…..……....... 4
Technical Support …….…………………….……………………….……………………. 4
Product Warranty ..….…………….……………………………….…………………..… 5
Safety …………………………………….………………………………………..….………… 6
START HERE:
Overview (READ FIRST) ……….………….…….…………….…..………....... 7
1. Create a Portal Account ……….…………...……….………………………..… 8
2. Install Ready2Control-Basic Software ……….……….….…………..…… 11
3. Machine Setup ……………………..…………………….…………..….…….…… 20
4. Ready2Control-Basic Workflow .………..…………..……..…..…………… 26
5. Ready2Cut Projects ………………………...….…………….,……...…………… 30
6. Install Vectric VCarve Desktop software .…………………...…………… 31
Ready2Control-Basic Overview
Main Window ………………..……….…………………………………………….… 33
Menu Bar ……………………….………………………………………….……… 34
Update Icons ………………………………….………….………….…………… 35
Job List Panel ……………………….………………………………………….… 36
Viewport ……………………….…………………………………………………… 38
Machine Controls ……………………….…………………………..………… 39
Keypad Enabled view ……………………….…………………………… 39
Keypad Disabled View ……………………….………….……………… 40
General Settings Window ………….…………………...…….…………… 42
Theme Settings ……………………………………………….…………… 43
Speed Settings ……………………………………….……….….………… 43
Control Settings ……………………….……………………….…..……… 44
Viewport Settings ……………………………..…….……...…………… 46
Report an Issue ……………………………………………….…………… 48
More Settings Menu ……………………….………………………………… 49
How to Update the Machine Firmware ……………………….….……………. 52
How to Update Ready2Control-Basic Software …………….………………. 56
How to Zero Z with a Touchplate ……….……….……………….….…………… 59
Maintenance ……….……….…………………………………………….…….…………… 62
Resources ……….……….…………………………………………...……………………… 63
Table of Contents Page
4Shark SD100 (Barracuda) User’s Manual
Back to TOC
To Our Customers
Thank you for purchasing a Shark SD100 (Barracuda). Included with your
purchase are software licenses for Ready2Control-Basic and Vectric
VCarve Desktop.
The Ready2Control-Basic software runs on your computer and includes a
broad set of machine control tools useful in operating your Shark SD100
(Barracuda) from your computer.
The Vectric VCarve Desktop software includes a broad set of CNC project
design tools. Design tutorials and software support can be found at
www.vectric.com
Pease read this manual carefully. It provides setup and operational
information for your Shark SD100 (Barracuda), Ready2Control-Basic and
VCarve Desktop software. This manual has been written with the
assumption that the user is experienced with the basic operation of a
computer as well as the technical knowledge required to safely operate
power tools.
System Requirements
Ready2Control-Basic and Vectric VCarve Desktop software can be used on
any PC computer that is running Windows 10 and has a USB output port.
The Shark SD100 (Barracuda) uses 110v power. Cutting files can be run on
the Shark SD110 using a computer running Windows 10 and
Ready2Control-Basic software. The Shark SD100 (Barracuda) can also be
controlled with a Control Pendant, which is an optional accessory that is
available from your local Next Wave CNC distributor or online at
NextWaveCNC.com.
Technical Support
If you need technical assistance with Ready2Control-Basic software or any
of your Next Wave Automation products please visit our Support webpage
at: NextWaveAutomation.com/support or email our support team at
date of purchase, and any other pertinent information that may be helpful
such as .tap files, .crv files, screen captures, and photos of your setup or
problem.
Ready2Cotrol-Basic also has a build-in “Issue Reporting” tool that sends
your Ready2Control-Basic software questions directly to our software
team. See page 48 for more information.
5
05/2020
Back to TOC
Warranty
Shark SD100 (Barracuda)
Next Wave Automation warrants that the Shark SD100 (Barracuda) to be
free from defects in material and workmanship for ONE YEAR from the date
of purchase. The warranty applies only to the original retail purchaser of
the Shark SD100 (Barracuda) when purchased from an authorized Next
Wave CNC distributor. This warranty covers parts and labor to correct the
defect. It does not cover the cost of shipping the machine and/or parts to
Next Wave Automation for repair.
This warranty does not apply to defects arising from normal wear and tear,
misuse, abuse, negligence, accidents, unauthorized repairs, alterations, or
lack of maintenance. This warranty is void if the Shark SD100 (Barracuda) or
any portion of the Shark SD100 (Barracuda) is modified without the prior
written permission from Next Wave CNC, or if the Shark SD100 (Barracuda)
is located or has been used outside the country where the Shark SD100
(Barracuda) was purchased.
Please contact Next Wave Automation to take advantage of this warranty.
If Next Wave Automation determines the Shark SD100 (Barracuda) is
defective in material or workmanship, then Next Wave CNC will at its
expense and upon proof of purchase send replacement parts to the original
retail purchaser necessary to cure the defect. Next Wave CNC will repair
the Shark SD100 (Barracuda) provided the necessary components are
returned to Next Wave CNC, shipping prepaid, with proof of purchase and
within the warranty period.
Next Wave CNC disclaims all other express or implied warranties, including
fitness for a particular purpose. Next Wave CNC shall not be liable for
death, injuries to persons or property, or incidental, consequential,
contingent or special damages arising from the use of the Shark SD100
(Barracuda) machine.
Ready2Control-Basic software
Next Wave CNC warrants Ready2Contol to perform as intended and will
provide customer support to the original purchaser when purchased from
an authorized retail distributor. Warranty only applies to the current
version or the support needed to update a past version. The cost of the
software upgrade (if any) is not covered by the warranty.
Next Wave Automation, LLC,
600 W. Boundary St., Perrysburg, Ohio 43551 USA
Main Office Phone (419) 318-4822
6Shark SD100 (Barracuda) User’s Manual
Back to TOC
When operating machinery always wear the appropriate ear and
eye protection and follow all safety instructions per your
machine’s owner’s manual and related equipment manuals.
1. Read safety and operating instructions before using your Shark SD100
(Barracuda).
2. Take time to fully understand how to safely operate your Shark SD100
(Barracuda).
3. Setup your Shark SD100 (Barracuda) per the instruction in this
manual.
4. Always wear appropriate eye and hearing protection when operating
your Shark SD100 (Barracuda) and accessories.
5. DO NOT machine metal with your Shark SD100 (Barracuda).
6. Never attempt to adjust the work piece or move the Shark SD100
(Barracuda) while the it is running.
7. If needed, use the Cancel or Pause buttons to Stop or Pause your
Shark SD100 (Barracuda) in the middle of an operation.
8. Never leave your Shark SD100 (Barracuda) unattended while it is
running.
9. While operating your Shark SD100 (Barracuda) , keep a multipurpose
dry chemical fire extinguisher nearby. It must be rated for both A & C
fires.
10. For added safety and convenience, connect your CNC to a 110-115V
power strip with an on/off switch. This provides an additional way to
turn off the machine in case of an emergency.
11. Follow all Safety instructions provide with your Shark SD100
(Barracuda) and accessories.
12. Follow accepted safety precautions and practices for woodworking
and machining.
7
05/2020
Back to TOC
The START HERE instructions are divided into 6 major sections. They cover
the steps involved in setting up your tool to use with the Ready2Control-
Basic software.
IMPORTANT
•Follow the steps in order.
•Don’t skip any steps unless instructed to do so.
START HERE Sections
1. Create a Next Wave Portal Account ………….…….…………… 8
2. Install Ready2Control-Basic software ….…..……………..…… 11
3. Machine Setup …...………………....….……….…..……….….……… 20
4. Ready2Control-Basic Workflow .………….…....…….…..……… 26
5. Ready2Cut projects (with machining tips) …….…..…...…… 30
6. Installing Vectric VCarve software ………………......…..……… 31
PROBLEMS?
If something doesn’t seem to be working correctly, try repeating the
previous step(s) a couple times –it’s easy to miss a step. If that doesn’t
solve the problem, please contact our Tech Support team by email or
phone at:
Email: [email protected]
Phone: (419)491-4520
Available 9am –5 pm Monday-Friday (Eastern time).
START HERE –OVERVIEW (READ FIRST)
8Shark SD100 (Barracuda) User’s Manual
Back to TOC
Section 1 - Create a Next Wave Portal Account
1.1 You will use your computer to control the Shark SD100 (Barracuda).
BUT DO NOT CONNECT THE TWO AT THIS TIME
1.3 The Next Wave Portal Login screen will appear. Click on SIGN UP*
* If you already have a Next Wave Portal Account click on Login and skip
Step 1.8 on Page 10
1.2 Open a web browser on the computer you plan to use with your Shark
SD100 (Barracuda) and go to https://portal.nextwaveautomation.com
9
05/2020
Back to TOC
Create a Next Wave Portal Account (cont.)
1.5 You should receive a Success message.
Check your email for a confirmation message.
If you don’t see the email, check your Spam folder.
1.4 Fill in the information on the Next Wave Portal Sign-up page.
Then click Create.
1.6 Click the Confirmation link in your email. You should receive a pop-up
notice confirming that your account has been created (see next step).
10 Shark SD100 (Barracuda) User’s Manual
Back to TOC
1.7 Once your Account is confirmed, click Close
1.8 Return to the Portal Login screen and Login with your Username and
Password. This will take you the Software Registration and download page.
This completes Section 1 –Create a Next Wave Portal Account
Create a Next Wave Portal Account (cont.)
Questo manuale è adatto per i seguenti modelli
1
Indice
