Nextar N1-504 Manuale utente
Table of Contents
Overview of your Digital Photo Display………………………………………………………… 1
Feature………………………………………………………………………………………………2
Accessory………………………………………………………………………………………… 3
Key Function……………………………………………………………………………………… 3
Operation………………………………………………………………………………………… 4
Set the Clock……………………………………………………………………………………… 8
Set the Alarm……………………………………………………………………………………… 8
Background light………………………………………………………………………………… 8
Select the Temperature Format………………………………………………………………… 8
Specifications……………………………………………………………………………………… 9
Replace Battery for Thermometer……………………………………………………………… 10
Software installation……………………………………………………………………………… 10
Picture Download…………………………………………………………………………… 11-16
- 1 -
LCD Travel Alarm Clock
And Digital Photo Display
Please read carefully before using this equipment.
Thank you for purchasing this portable digital photo display. It can be used to store 60 photos. It
is quick and easy to download pictures into your photo display. You may view your favorite
pictures stored in this photo display anytime, anywhere.
Overview of your Digital Photo Display
- 2 -
LCD Display
- 3 -
Feature
1. Photo display: JPG,BMP
2. Manual or Auto play mode
3. Time & Date Display
4. Clock & Hourly Call
5. Temperature Display
6. Background light
Accessory
1. Photo Viewer *1
2. 5Pin Mini USB Cable *1
3. Driver CD *1
4. User Manual *1
5. AAA Battery *2
6. 3V (CR2032) battery *1
7. Protective Pouch *1
Key Function
Previous
Next
Increase
- 4 -
Decrease/Background light
Power ON/OFF
Time Setup
Temp Setup
Operation:
1. Install 2 AAA batteries into the unit. The unit will then start automatically and switch to
slide-show mode. Then you can press or to select your favorite picture.
Press , to go to the main menu, shown below:
1) To turn off, press or to POWER OFF and press to confirm.Press and hold
for 3 seconds to turn on the until.
Remark: To prevent the waste of battery power, the unit is off automatically at 120 seconds by
default. If you need to change off time, please go to “Auto On/Off” menu.
2) To delete a photo, press or to Delete Image and press to confirm.
3) To select Automatic or Manual slideshow, press or to Display Mode and press
to confirm:
- 5 -
·Press or to Auto Slide and press to set up the slideshow interval (the default
interval time is 10 seconds, but you can select from 0~120 seconds):
·Press or to Manual Slide and press to confirm. The device will switch into
manual slide mode. Then you can press or to view the pictures.
4) To set the clock, press or to Clock Set and press to confirm.
Press or to set up the date and time. Press to confirm at each step.
- 6 -
5) Press or to select Clock Disp, then press to confirm. The device will enter
into clock setup shown below:
·Press or to select Disp Clock Normal, then press to confirm:
6) Press or to Auto ON/OFF, then press , it enters into the Auto ON/OFF setup as
shown below:
- 7 -
·Press or to select Auto ON, and the device will enter into the time setup shown
below:
·Press or to select Auto OFF, then press . The device will deactivate the auto off
function.
7) Press or to select Exit, then press to confirm. The device will exit the setup
mode. (Note: if you stop pressing buttons for more than 60 seconds while in the setup mode,
the photo viewer will switch into photo viewing mode automatically.)
2. When in photo display mode, press to enter into delete mode, shown below:
·Press or to select Del Current, then press again to delete the current photo.
Select Del All to delete all photos, and select Exit to quit delete mode
- 8 -
3. Set the Clock
Set the Time:
1. Press and hold for 3 seconds until the hour digits flash.
2. Press to set the hour.
3. Press to confirm. The minute digits flash.
4. Press to set the minute.
5. Press to confirm. The year digits flash.
6. Press to set the year.
7. press to fonfirm,The month digits flash.
8. Press to set the month.
9. Press to confirm. The date digits flash.
10. Press to set the date.
11. Press to confirm.
Note: You can Press to view the date and month at standby mode.
4．Set the Alarm
1. Press .
2. Press and hold for 3 seconds until the alarm icon appears, and the minute digits flash.
3. Press to set the minute.
4. Press to confirm. The hour digits flash.
5. Press to set the hour.
6. Press to confirm.
5．Background light
1. Press to show Background light
2. Background light off within 5 seconds.automatically
Indice
