Nexxt Solutions Smart Wi-Fi aroma diffuser Manuale utente
WARRANTY
nexxtsolutions.com/warranty
YEAR
2
Smart Wi-Fi aroma diffuser
English
User guide
Thank you for purchasing the Smart Wi-Fi aroma diuser
from Nexxt Solutions. We are excited to be part of making
your life easier, safer and bringing peace of mind inside and
outside your home.
Carefully read this manual prior to setting up and using this
product.
Package content
• Smart Wi-Fi aroma diuser (1)
• Power adapter (1)
• Quick start guide (1)
Product overview
This aroma diuser uses ultrasonic waves to instantly
vaporize water and essential oil to produce a cool, dry
fragrant mist.
1
2
5
4
3
6
10 11
12
79
8
1. Mist vent
2. Cover
3. Water tank
4. Light button
5. Mist button
6. Max. water level line
7. Drainage outlet
8. Light pipe
9. Main body
10. Air intake
11. Rubber feet
12. DC socket
Manual operation of the smart
diffuser
1. Place the aroma diuser upright on a rm, level surface
and remove the upper cover.
2. Insert the power adapter into the DC socket on the
aroma diuser and then plug the AC end into a standard
wall outlet.
3. Fill the aroma diuser with water. Use the MAX line as a
guide and do not overll. We recommend adding 2-3 drops
of essential oil per 100ml of water into the tank.
The rst time the unit will automatically be in pairing
mode, in which case the LED will blink rapidly. Otherwise,
follow the instructions below in Add device step 2.
Notes:
- Do not add water while the product is on.
- Never pour hot or boiling water into the tank.
Light
MIST
1H 3H 6H ON
4. Replace the cover and adjust the direction of the spray.
5. Press and hold the Mist button to turn the unit on and
o.
6. Briey press the Mist button to choose the operation
time: 1H, 3H, 6H (H=hours), ON for continuous spray time
or OFF to cancel.
7. The mist intensity is adjusted by holding and pressing
the Mist button until a beep is heard. One beep will
produce the highest intensity, while two beeps will set the
intensity to its lowest level.
8. Press the Light button to turn the LED on. The brightness
level is adjusted by pressing the Light button several times
to cycle through the available settings (running eect,
bright color, soft color or o ).
9. The unit will stop misting and the light will turn o
automatically when water level becomes too low.
Step 1
Register by email. If you want to register by phone, select
Register by phone on the upper right-hand corner of the
screen.
Installing the Nexxt Solutions
Home App
Download Nexxt Home app from Google Play or the Apple
App Store.
60 %
9:41 AM
Register by phone
Register by email
United States of America
Email
Get authentication code
60 %
9:41 AM
Nexxt Home
Nexxt Solutions Home App
Cancel
GET
Accvent LLC
Login with existing account
Create New Account
SOLUTIONS
Iniciarsesión con cuenta existente
Crear Cuenta Nueva
SOLUTIONS
60 %
9:41 AM
Nexxt Home
Nexxt Solutions Home App
Cancel
INSTALL
Accvent LLC
Step 3
Create a new password and then select Completed.
Step 2
Enter the verication code you received.
60 %
9:41 AM
Enter verication code
Verication code has been sent to your
60 %
9:41 AM
Set Password
Completed
6-20 characters, including letters and numbers
Step 4
The Nexxt Solutions Home account has been successfully
set up.
Step 5
Assign a Home Name and Family Location.
Select Add another room and name each room as needed.
Select Save to store your settings.
Add device
Step 1
Select Add device, followed by the smart aroma diuser.
60 %
9:41 AM
60 %
9:41 AM
Step 2
1. The device will boot
into pairing mode
automatically when
powered on for the rst
time. Manually pair the
device if it fails to go into
pairing mode
automatically or if the
aroma diuser was
paired before.
2. Press and hold the
Light button for 5
seconds or until a beep
is heard.
3. Press and hold the Light button again for 3 seconds or
until you hear another beep, and then release it. Wait until
the LED starts blinking, this indicates that the device has
entered into the pairing mode.
60 %
9:41 AM
Step 3
You must connect to a 2.4GHz WiFi network. Enter your
network password. Make sure you enter the correct
password, otherwise the device will not connect.
Step 4
Device added successfully will be displayed. Click on
Done. Once the pairing is complete, the LED will turn o.
60 %
9:41 AM
60 %
9:41 AM
60 %
9:41 AM
Device configuration
Once the initial setup is complete, the control interface of
the device will be displayed.
Main functions
Power: allows you to switch the device on and o.
60 %
9:41 AM
60 %
9:41 AM
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali Nexxt Solutions Accessori
