Nibe VVM 500 Guida utente

IHB EN 2028-12

031991

INSTALLER MANUAL

Indoor module

NIBE VVM 500

Quick guide

Navigation

Ok button (confirm/select)

Back button (back/undo/exit)

Control knob (move/increase/reduce)

A detailed explanation of the button functions can be found on page 40.

How to scroll through menus and make different settings is described on page 42.

Set the indoor climate

MY INSTALLATION

INDOOR CLIMATE HOT WATER

INFO

The mode for setting the indoor temperature is accessed by pressing the OK button twice, when in the start

mode in the main menu.

Increase hot water volume

1X INDOOR CLIMATE HOT WATER

MY INSTALLATION INFO

To temporarily increase the amount of hot water, first turn the control knob to mark menu 2 (water droplet)

and then press the OK button twice.

41 Important information

4Safety information

4Symbols

4Marking

5Serial number

5Recovery

6Inspection of the installation

7Outdoor modules

82 Delivery and handling

8Transport

8Assembly

9Supplied components

10Removing the covers

123 Indoor module's design

13List of components

144 Pipe connections

14General pipe connections

17Dimensions and pipe connections

18Connecting air/water heat pump

18Connection during use without heat pump

18Heating medium side

18Cold and hot water

18Installation alternative

205 Electrical connections

20General

23Connections

26Settings

28Optional connections

32Connecting accessories

346 Commissioning and adjusting

34Preparations

34Filling and venting

35Start-up and inspection

37Setting the cooling/heating curve

38Setting hot water circulation

38Pool

38SG Ready

407 Control - Introduction

40Display unit

41Menu system

448 Control – Menus

44Menu 1 - INDOOR CLIMATE

45Menu 2 - HOT WATER

45Menu 3 - INFO

46Menu 4 - MY SYSTEM

47Menu 5 - SERVICE

579 Service

57Service actions

6010 Disturbances in comfort

60Info-menu

60Manage alarm

60Troubleshooting

62Electrical addition only

6311 Accessories

6512 Technical data

65Dimensions and setting-out coordinates

66Technical specifications

68Electrical circuit diagram

73Item register

79Contact information

3Table of ContentsNIBE VVM 500

Table of Contents

Safety information

This manual describes installation and service proced-

ures for implementation by specialists.

The manual must be left with the customer.

This appliance can be used by children

aged from 8 years and above and persons

with reduced physical, sensory or mental

capabilities or lack of experience and

knowledge if they have been given super-

vision or instruction concerning use of the

appliance in a safe way and understand

the hazards involved. Children shall not

play with the appliance. Cleaning and user

maintenance shall not be made by children

without supervision.

Rights to make any design or technical

modifications are reserved.

©NIBE 2020.

MinMaxSystem pres-

sure

0.05 MPa

(0.5 bar)

0.3 MPa

(3 bar)

Heating medium

0.01 MPa

(0.1 bar)

1.0 MPa

(10 bar)

Domestic water

Water may drip from the safety valve’s

overflow pipe. The entire length of the over-

flow water pipe must be routed to a suitable

drain and be inclined to prevent water pock-

ets, and must also be frost-proof. The over-

flow pipe must be at least the same size as

the safety valve. The overflow pipe must be

visible and its mouth must be open and not

located close to electrical components.

VVM 500 must be installed via an isolator

switch. The cable area has to be dimensioned

based on the fuse rating used.

Symbols

NOTE

This symbol indicates danger to person or ma-

chine .

Caution

This symbol indicates important information

about what you should consider when installing

or servicing the installation.

TIP

This symbol indicates tips on how to facilitate

using the product.

Marking

The CE mark is obligatory for most products sold

in the EU, regardless of where they are made.

Classification of enclosure of electro-technical

equipment.

IP21

Danger to person or machine.

Read the User Manual.

NIBE VVM 500Chapter 1 | Important information4

1 Important information

Serial number

The serial number can be found at the bottom right of

the front cover, in the info menu (menu 3.1) and on the

type plate (PZ1).

Serial number

Caution

You need the product's ((14 digit) serial number

for servicing and support.

Recovery

Leave the disposal of the packaging to the in-

staller who installed the product or to special

waste stations.

Do not dispose of used products with normal

household waste. It must be disposed of at a

special waste station or dealer who provides this type

of service.

Improper disposal of the product by the user results in

administrative penalties in accordance with current le-

gislation.

5Chapter 1 | Important informationNIBE VVM 500

Inspection of the installation

Current regulations require the heating installation to be inspected before it is commissioned. The inspection must

be carried out by a suitably qualified person.

In addition, fill in the page for the installation data in the User Manual.

DateSigna-

ture

NotesDescription

✔

Heating medium, see section "System

diagram"

System flushed

System vented

Expansion vessel

Particle filter

Safety valve

Shut off valves

Boiler pressure

Connected according to outline dia-

gram

Hot water, see section "Cold and hot wa-

ter"

Shut off valves

Mixing valve

Safety valve

Electricity, see section "Electrical connec-

tions"

Connected communication

Circuit fuses

Fuses, indoor module

Fuses property

Outside sensor

Room sensor

Current sensor

Safety breaker

Earth circuit-breaker

Setting of emergency mode thermo-

stat

Miscellaneous

Docked to

NIBE VVM 500Chapter 1 | Important information6

Outdoor modules

COMPATIBLE AIR/WATER HEAT PUMPS

NIBE SPLIT HBS 05

HBS 05-6

Part no. 067 578

AMS 10-6

Part no. 064 205

HBS 05-12

Part no. 067 480

AMS 10-8

Part no. 064 033

HBS 05-12

Part no. 067 480

AMS 10-12

Part no. 064 110

HBS 05-16

Part no. 067 536

AMS 10-16

Part no. 064 035

F2040

F2040-8

Part no. 064 109

F2040-6

Part no. 064 206

F2040-16

Part no. 064 108

F2040-12

Part no. 064 092

F2120

F2120-8 3x400V

Part no. 064 135

F2120-8 1x230V

Part no. 064 134

F2120-12 3x400V

Part no. 064 137

F2120-12 1x230V

Part no. 064 136

F2120-20 3x400V

Part no. 064 141

F2120-16 3x400V

Part no. 064 139

Check the software version of compatible older NIBE

air/water heat pumps, see page 18.

7Chapter 1 | Important informationNIBE VVM 500

Transport

VVM 500 should be transported and stored vertically in

a dry place. However, the VVM 500 may be carefully

laid on its back when being moved into a building.

Assembly

• Place VVM 500 on a solid foundation indoors that can

take its weight. Use the product's adjustable feet to

obtain a horizontal and stable set-up.

The space where VVM 500 is located must be frost-

free.

30 - 50 mm

15 - 40 mm

20-55 mm

• Because water can exit the safety valve1for hot wa-

ter, when connected to VVM 500, the space where

VVM 500 is placed must be provided with a floor drain.

1Not enclosed.

INSTALLATION AREA

Leave a free space of 800 mm in front of the product.

All service on VVM 500 can be carried out from the front.

800

10-25

NOTE

Leave 10 – 25 mm free space between

VVM 500 and the wall behind for routing cables

and pipes.

NIBE VVM 500Chapter 2 | Delivery and handling8

2 Delivery and handling

Supplied components

Room sensorOutside sensor

O-rings

LEK

Current sensor

LEK

Cable*

APH

Flow meter*

Union nut*

Copper pipe with flange to

energy meter*

*Only applies to Norway.

LOCATION

The kit of supplied items is placed on top of the product.

9Chapter 2 | Delivery and handlingNIBE VVM 500

Removing the covers

Front cover

LEK

1. Remove the screws from the lower edge of the

front panel.

2. Lift the panel out at the bottom edge and up.

Side covers

The side covers can be removed to facilitate the install-

ation.

Caution

50 mm space required to remove the side

panels.

1. Remove the screws from the upper and lower

edges.

2. Twist the cover slightly outward.

3. Move the hatch backwards and slightly to the side.

4. Pull the cover to one side.

5. Pull the hatch forwards.

NIBE VVM 500Chapter 2 | Delivery and handling10

Altri manuali per VVM 500

Indice

Altri manuali Nibe Pompa di calore

Manuali Pompa di calore popolari di altre marche

MICROWELL

MICROWELL HP 1000 GREEN Manuale utente

Sanyo

Sanyo SAP120FCH Manuale utente

Daikin

Daikin EHYHBH05AA Manuale utente

Panasonic

Panasonic WH-SDF03E3E5 Guida

Bryant

Bryant 544B Manuale utente

Airxcel

Airxcel 45000 Series Manuale

Mitsubishi Electric

Mitsubishi Electric PUZ-SWM60VAA Manuale utente

Dimplex

Dimplex LI 16I-TUR Guida utente

Carrier

Carrier WSHP Open v3 Guida rapida alla configurazione

TGM

TGM CTV14CN018A Manuale utente

Carrier

Carrier 38MGQ Series Manuale utente

Kokido

Kokido K2O K880BX/EU Guida alla risoluzione dei problemi

Viessmann

Viessmann VITOCAL 300-G PRO Type BW 2150 Guida rapida

Carrier

Carrier 48EZN Manuale utente

Viessmann

Viessmann KWT Vitocal 350-G Pro Series Istruzioni operative

Ariston

Ariston NIMBUS Manuale utente

Weishaupt

Weishaupt WWP L 7 Guida utente

GE Zoneline AZ85H09EAC Manuale utente