NICE DIGI Smart Lever X1 Manuale utente
Smart Lever
User Manual
Model: X1
1
5.Using Your Lock 17 - 18
1 Product Overview
Contact NICE DIGI Support
1
2 Packing List
WELCOME TO
NICE DIGI FAMILY
TABLE OF CONTENTS
3.1 Preparing Door
3.2 Adjust Latch Backset Length
3.3 Install Latch and Strike & Strike Box
3.4 Adjust the Handles Direction
3.5 Install Exterior Assembly
3.6 Install Interior Assembly
3.7 Installing Batteries
4.1 System Initialization
4.2 Download the NICE DIGI App
4.3 Sign-up and Login Your Account
4.4 Pair the lock with APP
4.5 User Management
2
3
4
5
5
6
7
8
9
10
10
10
11
11
11-16
3 Installation 5- 10
4 User Guide 10 - 16
6.FAQs 19
2
IMPORTANT NOTES
Install and test the lock with the door open to avoid being locked out.
Please read all the instructions before contacting customer support.
Please contact customer support before returning the product to the store.
DO NOT install the batteries before installing the lock!
Follow the instructions in sequential order!
Please must use AA Alkaline Battery and don’t use Lithium
Battery or Rechargeable Battery.
NICE DIGI TERMS & POLICIES
Before use all NICE DIGI products, please read all applicable terms,
rules, polices and usage provision found at
https://nice-digi.com/pages/privacy-policy. By using your NICE DIGI products,
you agree to be bound by the NICE DIGI Privacy Policy.
For technical documents and more
Please visit
https://nice-digi.com/pages/support-smart-lever-x1a
E-mail: [email protected]
NEED HELP?
Fingerprint Reader
Used to verify your finger and unlock
from outside.
Anti-peep Keypad
Used to enter the code and unlock from
outside.
Keyhole
Used to insert key to unlock in
emergency situations.
Type-C USB (5V)
Used to connect power bank to activate
the lock when battery runs out.
(It can't charge the battery of lock)
Key Fob Reader
Used to read the key fob and unlock
from outside.
Battery Case
Used to insert 4 AA Alkaline Batteries.
Fingerprint Reader
1 Product Overview
3
Type-C USB (5V)
Battery Case
Anti-peep Keypad
Key Fob Reader
Keyhole
Product Overview
4
Parking List
2 Packing List
Strike & Strike Box * 1 Square Shaft * 1 Screw A * 4
Mechanical Key * 2 Latch * 1
Punch Diagram * 1
Exterior Assembly * 1 Interior Assembly * 1 User Manual * 1
L Shape Allen Wrench * 1
Rubber Plate * 2
Positioning Column * 2
60mm 70mm
2 /
34
2/
38
Screw B * 3
Screw Casing * 3 Pin * 1
Key Fob * 2
Smart Lock
Smart Lock
5
3 Installation
3.1 Preparing Door
Please scan this QR code to watch the easy step
by step installation video before attempting to install
your Smart lock.
Check the door’s dimensions
Measure to confirm that the door is between 1-3/8in to 2-in(35mm-50mm)thick.
Measure to confirm that the hole in the door is 2-1/8in(54mm).
Measure to confirm that the door is between 2-3/8in to 2-3/4in(60mm-70mm)thick.
Measure to confirm that the hole in the door edge is 1in(25mm).
1
”
(25 mm)
1-3/8
”
- 2
”
(35 mm-50 mm)
2-3/8
”
(60 mm) OR 2-3/4
”
(70 mm)
2-
1/8”
(54 mm)
3.2 Adjust Latch Backset Length
Measure your door backset, then adjust to the corresponding latch length.
2-3/8”(60mm) 2-3/4”(70mm)
60mm 70mm
2/
34
2 /
38
60mm 70mm
2 /
34
2 /
38
Installation
6
3.3 Install Latch and Strike & Strike Box
1 Install strike & strike box on door frame with Screw A.
2 Install latch into door with Screw A.
Screw A
Strike
Box Strike
60
2 /
38
Attention Check Latch's Status
Correct: Horizontal Error: Inclined
1) Latch's square hole should place horizontal.
2) If square hole is inclined ,smart lock will get stuck when unlocked.
Installation
7
3.4 Adjust the Handles Direction
1 Confirm the opening direction of your door.
2 Adjust Handles According to Door Opening Direction.
1. For Exterior Assembly
2. For Interior Assembly
Step1 :
Loosen the screw with
a 3mm Allen wrench
(Included)
Step3:
Tighten the screw after
adjusting the handle
direction and complete.
Step2:
Turn the handle to adjust
the direction
Step1 :
Loosen the screw
Step3:
Tighten the screw after
adjusting the handle
direction and complete.
Step2:
Remove the handle to
adjust the direction
Left-Handed Door Right-Handed Door
Installation
8
3.5 Install Exterior Assembly
1 Install the waterproof rubber plate to exterior assembly.
2 Install square shaft into spindle hub.
3 Install 2 positioning columns.
4 Install 3 screw casings.
5 Install exterior assembly
Spindle
Hub
Install Square Shaft
2
Install the waterproof rubber plate
1
Metal Dot
Press the metal dot, align dot with spindle
hub hole and install.
4Install 3 screw casings
5Install exterior assembly
Installation
3
Install 2 positioning
columns
9
Installation
3.6 Install Interior Assembly
1 Install the waterproof rubber plate.
2 Connect the cable.
3 Secure exterior assembly with screw B.
Connect the wire
2
1Install the
waterproof rubber plate
3Secure exterior assembly
with screw B
Indice
