Nicolaudie STICK-CU4 Manuale utente
© Nicolaudie-Sunlite 1989-2016. All rights reserved. We reserve the right without notice to amend the technical information and specications.
STICK-CU4
Sunlite Touch Sensitive Intelligent Control Keypad
http://www.nicolaudie.com/stick-cu4.htm
Key Features
• DMX stand alone controller
• Compatible with any DMX xture or DMX LED driver
• Ready-to-use (pre-loaded with 8 scenes and 170 RGB
xtures)
• Sleek black glass design which sits 10mm from the wall
• Color palette (can also be used for scene selection)
• 12 touch-sensitive buttons. No mechanical parts
• Touch-sensitive wheel allows for accurate color selection
• Built-in ash memory for storing programs
• Up to 36 dynamic or static scenes
• 512 DMX channels. Control 170 RGB xtures
• USB connectivity for programming and control
• 8 dry contact trigger ports
• OEM customization of the color palette and logo
• Windows/Mac software to set dynamic colors/eects
Overview
This DMX controller is aimed at architectural
lighting installations requiring an advanced
level of programming (color changing
eects, specic colors etc). The controller
has been engineered to meet the needs of
lighting designers, whilst providing a clean
and user-friendly panel. Featuring an on/o
button, 6 scene buttons and a color wheel,
the controller is ideal for hotels, homes and
public environments. The controller is USB
programmable from a PC or Mac using the
ESA2 software. Up to 36 scenes can be stored
within the controller and directly recalled via 6
touch sensitive scene buttons.
Technical Data
Input Power 5-10V DC 0.6A
Output Protocol DMX512
Programmability PC, Mac
Available Colors Black
Connections USB, 8 dry contact
ports
Memory In-built ash
Temperature -10 °C - 45 °C
Mounting Single or double-gang
wall socket
Dimentions 146x106x10mm
Weight 200g
Standards EC, EMC, ROHS
Optional Accessories
RJ2BLOCK RJ45 to connector block converter for power+DMX
POWER4M 5-10v ACDC power supply
www.nicolaudie.com
Sunlite Touch-sensitive Intelligent Control Keypad Ref. STICK-CU4
© Nicolaudie-Sunlite 1989-2016. All rights reserved. We reserve the right without notice to amend the technical information and specications.
Page 2
V 1.00
POWER
+DMX
POWER
5V-9V
PORT 2
PORT 1
DMX
8
7
6
5
4
3
2
1
-
+
+
Ground
-
POWER
DC +
POWER
Ground
DMX
Ground
DMX -
DMX +
Other Connections
1
3
5
7
9
11
13
15
17
19
2
4
6
8
10
12
14
16
18
20
NC
NC
PORT8
PORT7
PORT6
PORT5
PORT4
PORT3
PORT2
PORT1
GND_DMX
DMX+
DMX-
NC
NC
NC
NC
NC
GND
VIN
HE10 EXTENSION socket
Compatible header connectors:
WURTH ELEKTRONIK ref: 61301021121
MOLEX ref: 10-89-7202
TE Connectivity ref: 1-87227-0
FCI ref: 77313-101-20LF
HARWIN ref: M20-9981046
SAMTEC ref: TSW-110-xx-T-D
FARNELL ref: 1841232
RS ref: 763-6754 673-7534 251-8165
MOUSER ref: 538-10-89-7202
DIGIKEY ref: WM26820-ND
Technical datasheet Revision date 02 Mar. 2016
2. Connect the wires
POWER: Connect a 5-10V 0.6A ACDC supply. Be sure to not invert the + and the ground.
DMX: Connect the DMX cable to the lighting receivers (LEDs, Dimmers, Fixtures..) (for XLR:
1=ground 2=dmx- 3=dmx+)
There are 2 ways to connect the power and DMX:
3. Mount the interface on the wall
First, mount the backside of the interface on the wall with 2 or
more screws. Secondly, connect the DMX and power (connec-
tor block or RJ45).
The front panel is mounted by pressing it against the back plate
and then sliding down. Two screws should then be attached
underneath to hold the controller in place.
DMX CHIP
Solder the DMX chip to the 8 pin connec-
tor on the right of the RJ45 socket. Be
sure that the chip is facing downwards
CHECK PIN CONFIGURATIONS.
APPLYING POWER TO THE
DMX INPUT WILL DAMAGE THE
CONTROLLER
MAKE SURE THE CONTROLLER
IS MOUNTED FLAT WITHOUT
OBSTRUCTIONS FROM BEHIND
AS THIS CAN PUSH APART THE
GLASS
EASY INSTALLATION
1. Mount an electrical box inside the wall
The controller can be installed in a standard electrical
backbox. This box is usually 60mm high and wide,
except in Japan and America where it is 83.5mm/3.29
inches high. You can insert the AC/DC adapter inside or
outside the backbox.
Connector Block RJ45
P1 P2 P3 P4 ... GND
Dry Contact Port Triggering
It is possible to start scenes using the dry
contract input ports available on the HE10
extension socket. To activate a port, a brief
contact of atleast 1/25 second must be
established between the ports (1...8) and the
ground (GND). Note: the scene will not be
switched o when the switch is released.
www.nicolaudie.com
Sunlite Touch-sensitive Intelligent Control Keypad Ref. STICK-CU4
© Nicolaudie-Sunlite 1989-2016. All rights reserved. We reserve the right without notice to amend the technical information and specications.
Page 3
V 1.00
Power+DMX
socket (RJ45)
10 mm
106 mm
146
mm
Technical datasheet Revision date 02 Mar. 2016
Scene Selection
mini
usb
dmx
led
data
led
Touch-sensitive
user interface
Extension socket
rear connectors
(2x10 pins)
Screw-terminal
rear connector
(5 pins)
Front access
connections
Dimmer
Color
Saturation
Reset*
*see ‘Center Button’ section below for further
information
Standby
Center Button
Other Settings
There are several operation modes for the button in the center of the palette. These can be set within the Hardware Manager.
Reset color : the color set on the wheel will be cleared and the default scene will be restored.
Play next scene : the currently selected scene will stop and the next scene will play.
Select next bank : if more than 6 scenes are stored in the controller, the next bank will be selected. One of the 6 scene selection
buttone will ash for 1 second to indicate the selected bank number.
Toggle wheel color/scene mode : the wheel can be used to select a color or a scene, depending on the mode. Tapping the
button will toggle between scene selection and color selection mode. The center LED will blink when the wheel is set to scene
mode.
Disable button : the button will have no function.
There are several other settings which are available within the Hardware Manager.
Connections & Hardware Operation
Miscellaneous:
Name : a custom name for the controller, usefull if you have several controllers connected.
Parameters:
Color/Dimmer : determines whether the color/dimmer will be reset when a new scene is recalled and whether color/dimmer
changes are stored globally, or per scene.
Re-select scene : determines what happens when a playing scene is re-selected.
Reset color : clear any color changes and reset to the scene’s color vlaues.
Reset dimmer : clear any dimmer changes and reset to the scene’s dimmer vlaues.
Reset saturation : clear any saturation changes and reset to the scene’s saturation vlaues.
Starting mode (L) : change the language of the text which appears on the screen.
Re-select scene : settings related to the LEDs on the controller.
Scene LED light level : sets the brightness of the LEDs.
RGB LED enable : enabled and disables the RGB LED in the center of the wheel.
www.nicolaudie.com
Sunlite Touch-sensitive Intelligent Control Keypad Ref. STICK-CU4
© Nicolaudie-Sunlite 1989-2016. All rights reserved. We reserve the right without notice to amend the technical information and specications.
ESA2 Software (Windows/Mac)
http://www.nicolaudie.com/esa2.htm
Hardware Manager (Windows/Mac) - Firmware, clock..
http://www.dmxsoft.com/global/ftp/hardwaremanager.zip
http://www.dmxsoft.com/global/ftp/HardwareManager.dmg
Page 4
V 1.00
Technical datasheet Revision date 02 Mar. 2016
The DMX controller can be programmed from a PC or Mac using the software available on our website. Refer to the
corresponding software manual for more information. The rmware can be updated using the Hardware Manager which is
included with the programming software.
Programming the Controller
Setting up the Controller
Troubleshooting
The controller is in bootloader mode. This is a special ‘startup mode’
which is run before the main rmware loads.
-Check that there is nothing metallic touching the back of the controller
-Try re-writing the rmware with the latest hardware manager
No showle has been detected on the controller.
-Download the latest software
-Update tot he lates rmware using the included Hardware Manager
-Try re-writing the show le
Center LED Red, cycling pattern on 6 LEDs - Error1
Center LED Green, cycling pattern on 6 LEDs - Error2
Center LED Blue, cycling pattern on 6 LEDs - Error3
-Be sure that the latest software version is installed (use the beta if
available)
-Connect by USB and open the Hardware Manager (found in the software
directory). If it’s detected here, try to update the rmware
-Try another USB cable, port and computer
-Check the DMX +, - and GND are connected correctly
-Check that the driver or lighting xture is in DMX mode
-Be sure that the DMX address has been set correctly
-Check there are no more than 32 devices in the chain
-Check that the DMX LED is ickering to the right of the SD card
-Connect with the computer and open Hardware Manager (found in the
software directory). Open the DMX Input/Output tab and move the faders.
If your xtures respond here, it is possibly a problem with the show le
All 7 LED’s on the controller are blinking The 6 scene LED’s are blinking
Contact us if you see the following errors
The controller is not detected by the computer
The lights are not responding
Altri manuali Nicolaudie Controllori
