Nikkei NR280PRABBIT Manuale utente
NR280PRABBIT Clockradio manual
Index
1. Intended use
2. Safety
o2.1. Labels in this manual
o2.2. General safety instrucons
3. Preparaons for use
o3.1. Unpacking
o3.2. Package contents
4. Installaon
o4.1. (Oponal) Insert the baery
o4.2. Connecng to the mains
5. Funcons
6. Operaon
o6.1. Seng the date and me
o6.2. Using the radio
o6.3. Using the projecon funcon
o6.4. Seng the mer and display
o6.5. Seng the alarm
7. Cleaning and maintenance
8. Technical data
9. Disposal of used electric and electronic equipment
1.Intended use
The NR280P is intended for use as an alarm radio. The NR280P has an FM radio function, a projection function
and includes a lamp. The temperature can also be displayed.
Read the manual carefully before the first use.
2.Safety
2.1. Labels in this manual
WARNING A warning means that injury or death is possible if the instructions are not obeyed.
CAUTION A caution means that damage to the equipment is possible.
A note gives additional information, e.g. for a procedure.
2.2. General safety instructions
CAUTION Do not spill any liquid on the appliance.
WARNING Do not put force on the appliance. The appliance can fall and can cause serious injury.
3.Preparations for use
3.1. Unpacking
Unpack the appliance carefully.
Check the package contents as described below. If any item is missing, please contact your reseller.
Remove the labels from the front panel carefully if present.
We recommend that you retain the original carton and packing materials in case it ever becomes necessary to
return your product for service. This is the only way to safely protect the product against damage in transit. If you
do dispose of the carton and the packing materials, please remember to recycle with due care to the environment.
3.2. Package contents
The following items are included in the received package:
1 x NR280P Clockradio
1x Quick start guide
If any item is missing, please contact your reseller.
4.Installation
CAUTION Do not put the appliance near a heat source.
CAUTION Do not expose the appliance to direct sunlight.
Put the appliance on a horizontal flat surface.
Connect the appliance to the mains.
4.1. (Optional) Insert the battery
To ensure that your alarm radio remains switched on during a power outage, you can insert a battery (type
CR2032). Do this as follows:
1. Remove the battery cover.
2. Insert the batteries matching the (+) and (-) polarity markings.
3. Re-install the battery cover.
If you do not use the appliance for an extended period, remove the batteries.
Please note: batteries not included.
CAUTION Incorrect installation can cause battery leakage and corrosion which will damage the appliance.
Corrosion, oxidation, battery leakage and any other gradually acidic defect of this nature will invalidate the
guarantee.
4.2. Connecting to the mains
Connect the appliance to the mains.
5.Functions
1. Setting the brightness higher
2. Setting the brightness lower
3. Switch the lamp on or off
4. M+/NAP button
a. Save a radiostation into the memory
b. Setting the timer
c. Turn off display
5. Lamp
6. SNOOZE/SLEEP/DIMMER button
a. Adjusting the brightness of the display
b. To snooze the alarm, press SNOOZE/SLEEP/DIMMER (6). The alarm sounds again after the snooze
time has elapsed.
c. Dim the light temporary during an alarm
7. Switch between time and temperature
8. button
Switch between time and date
b. Search frequency
9. Activating the alarm 1
10. Screen
11. Switch to radiomode
12. button
a. Switching between summer and winter time
b. Search frequency
13. Activating the alarm 2
14. button
a. Adjust the volume (+)
Screen
Switch between time and date
15. Adjust the volume (-)
16. button
a. Turning the projection 180 degrees
Projection function
b. Switch between time and temperature
17. Turn the projection function on or off
18. Projection dial
19. Loudspeaker
20. Temperature sensor
21. FM antenna
22. Battery cover
6.Operation
6.1. Setting the date and time
Note! Turn the radio off before proceding.
Keep key (7), pressed for 2 seconds
The date is flashing
Press the (8) or (12) key to set the desired year.
Press (7) to confirm.
The month is flashing
Press the (8) or (12) key to set the desired month.
Press (7) to confirm.
The day is flashing
Press the (8) or (12) key to set the desired day.
Press (7) to confirm.
Digital time indication is flashing
Press the (8) or (12) key to choose between 24 or 12 hour time display.
Press (7) to confirm.
The hours are flashing on the display.
Press the (8) or (12) key to set the desired hour.
Press (7) to confirm.
The minutes are flashing on the display.
Press the (8) or (12) key to set the desired minutes.
Press (7) to confirm.
6.2. Using the radio
Switch to radiomode
To do this, press the key (11).
The frequency is shown on the display
Manually adjust the frequency
To tune to the station of your choice, press the (8) button or the (12) button repeatedly until the frequency is
found.
Automatically adjust the frequency
Press and hold the (8) Button or the (12) Button to find the desired frequency.
Save a radiostation into the memory
Keep key (4), pressed for 2 seconds
The digits start flashing.
Press the (8) or (12) key to select a memory location.
Press (4) to confirm.
3 memory locations are available.
Activating a stored function
Press the button (4) repeatedly until the desired frequency is found.
Setting the timer
While listening to the radio press the (6) button several times to set the "swith-off" time between 90 and 10
minutes.
After the set time, the radio automatically switches off .
6.3. Using the projection function
Turn the projection function on or off
Press the (17) button .
Caution! When the alarm radio is first connected to the power supply, the projection function is immediately
activated.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Nikkei Radiosveglia
