Nikon LS-2000 Manuale utente

- 1 -

Reference Manual

35mm Film Scanner

LS-2000

Contents

Cautions

Safety Precautions

If You Notice Anything Abnormal

Installation and Storage

Overview

Parts and Accessories

What’s in the Box

Optional Accessories

System Requirements

Parts of the LS-2000

Status LED

Setup

Installation

Connecting the Power Cable

Connecting the SCSI Cable

Setting the SCSI ID

Using the Scanner

Turning the Scanner On

Inserting and Removing Adapters

Using the MA-20 SLIDE MOUNT ADAPTER

Using the SA-20 STRIP FILM ADAPTER

Using the IX240 Film Adapter (IA-20)

Using the SF-200 Slide Feeder

Turning the Scanner Off

- 2 -

Contents

Maintenance

Cleaning

Storage

Transport

Troubleshooting

Specifications

- 3 -

Cautions

• The reproduction of this manual in whole or in part is pro-

hibited save in cases in which Nikon’s prior permission has

been obtained.

• The information contained in this manual is subject to change

without notice.

• Nikon has made every effort to produce a perfect manual,

but should you find any mistakes, we would be grateful if you

would kindly let us know. The address of Nikon’s represen-

tative in your area is provided separately.

• We shall take no responsibility for consequences resulting

from the operation of this product, despite the terms men-

tioned above.

Trademark Information

Macintosh is a registered trademark of Apple Computer, Inc.

Microsoft and Windows are registered trademarks, and Windows NT a

trademark, of Microsoft Corporation.

IBM PC/AT is a trademark of International Business Machines Corporation.

i386, i486, Pentium, and Pentium II are trademarks of Intel Corporation,

U.S.A.

Adaptec is a registered trademark of Adaptec, Inc.

Adobe and Acrobat are registered trademarks of Adobe Systems, Inc.

The Defect Correction function incorporated in the LS-2000 makes use of

Digital ICE technology developed by Applied Science Fiction Inc. Digital ICE

and the Digital ICE logo are trademarks of Applied Science Fiction Inc.

Other brand or product names are the trademarks or registered trade-

marks of their respective holders.

Symbol

The symbols in this manual signify important safety precau-

tions. All passages marked with this indication should be read

prior to installation to prevent injury to yourself or to others.

These indications are also placed in the table of contents to

mark passages that should be read before use.

✔Symbol

The ✔symbols in this manual signify the need for caution when

using the product. These indications are placed in sections that

should be read before operation to prevent damage to the

product.

- 4 -

Cautions

Federal Communications Commission (FCC)

Radio Frequency Interference Statement

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protec-

tion against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communi-

cations. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one

or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and re-

ceiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/television techni-

cian for help.

CAUTIONS

Modifications

The FCC requires the user to be notified that any changes or

modifications made to this device that are not expressly ap-

proved by Nikon Corporation may void the user's authority to

operate the equipment.

SCSI Cable

Use the SCSI cable supplied with your scanner (see page 13 of

this manual). Using other interface cables may exceed the limits

of the class B Part 15 of FCC rules.

Note: A SCSI cable is provided only with scanners sold in the

U.S.A. and Canada. In other regions, a ferrite core is provided for

attachment to a SCSI cable.

Notice for customers in Canada

CAUTION

This class B digital apparatus meets all requirements of the

Canadian Interference Causing Equipment Regulations.

ATTENTION

Cet appareil numérique de la classe B respecte toutes les

exigences du Règlement sur le matériel brouilleur du Canada.

Notice for customers in European countries

ACHTUNG

Dieses Gerät entspricht den Bestimmungen der EG-Direktive 87/

308/EEC zur Störungsunterdrückung. Lärmemission kleiner 70 dBA.

- 5 -

Safety Precautions

Observe the following safety precautions when installing and

operating the LS-2000:

•Do not allow your fingers, hair, or clothing into the

film insertion slot

Do not insert your fingers, hair, or clothing into the film

insertion slot on the front of the scanner when the power is

on and a film adapter is in place. Doing so could result in

injury.

•Use an appropriate power supply

Use an AC power supply of 50/60Hz and a voltage of from

100V–240V. Be sure to use a power cord rated for the

appropriate voltage.

At voltages of more than AC 125V:

use a power cord that complies with the safety standards of

the country in which it is used, which has a plug rated for AC

250V, 15A (NEMA 6P-15) and insulation of SVT type or

better, and which is more than AWG18 in thickness.

At voltages of AC 125V or less:

use a power cord that complies with the safety standards of

the country in which it is used, which has a plug rated for AC

125V, 10A and insulation of SVT type or better, and which is

more than AWG18 in thickness.

•Connect the scanner to ground

The outlet into which the power cable is plugged must be

grounded. Failure to ground the power supply could result

in electric shock.

• The scanner and all devices to which it is connected must be

connected to a common ground. If a common ground is not

used, a ground loop could occur, causing electric shock or

noise static.

• Do not ground the outlet to a gas or water pipe.

* The shape of the cable may

vary depending on the country

of sale.

- 6 -

Safety Precautions

•When handling the power and SCSI cables

Unplug the power cable by pulling on the plug, not on the

cable itself. Pulling directly on the cord could result in dam-

age that could cause fire or electric shock.

• When connecting or disconnecting the SCSI cable, handle

the cable by the connector. Do not pull on the cable itself.

MADE IN JAPAN

100098

SCSI SCSI

SCSI NB TERMINATOR

OFF ON

100098

SCSI

• Do not connect or disconnect the cables while the power is

on.

• Do not damage or modify the power or SCSI cables. Fire or

electric shock may result if the cables are placed under heavy

objects, exposed to heat or flame, or forcibly tugged or bent.

• Should the insulation of the cables become damaged and the

wires become exposed, contact your retailer or Nikon

service office for information on repair or replacement.

Continued use could cause fire or electric shock.

•

Do not plug the power cord into an extension cord or multiple-

outlet extension, as this could result in fire or malfunction.

• Do not handle the cables when your hands are wet. Doing

so could cause electric shock.

* The shape of the cable may vary

depending on the country of sale.

* The shape of the cable

may vary depending on

the country of sale.

- 7 -

Safety Precautions

•Do not disassemble

The interior of the scanner contains areas of high voltage.

Removing the scanner’s cover could result in fire or electric

shock. Contact your dealer or Nikon service office for

inspection or repair.

•Do not modify

Do not modify the equipment. Doing so could cause fire or

electric shock.

•Do not place heavy objects on the scanner

•Place on a stable surface

Do not use the equipment on an unstable surface or on a

surface which is not horizontal. This could cause the equip-

ment to fall, resulting in injury.

•Do not drop

Do not subject the equipment to strong shocks, as this could

cause malfunction or breakage. The scanner contains glass

parts; if the scanner is dropped or otherwise damaged,

caution must be observed to avoid broken glass.

- 8 -

Safety Precautions

•Keep clean

Use a dry cloth to remove any dirt from metal sections of

the scanner and their surroundings. Using the equipment

when dirty could cause fire.

•Do not place foreign objects inside the scanner

Do not allow foreign objects of any kind into the unit. If

flammable objects, metal, or water come in contact with the

interior of the scanner, malfunction, fire, or electric shock

could result.

• Do not place vases, flowerpots, cups, cosmetics, vessels

containing chemicals or water, or small metal articles on top

of the equipment. Should such articles or their contents fall

into the equipment, fire, electric shock or malfunction could

result.

• Exposing the scanner to volatile substances such as alcohol,

benzine, thinner, or pesticides could cause malfunction, fire,

or electric shock.

• If foreign substances or water should find their way into the

equipment, turn off the power immediately, unplug the

power cord and contact your dealer or nearest Nikon

service office. Continued use could result in fire, electric

shock or malfunction. Particular care is advised in house-

holds with small children.

•When not using for an extended period

When not using the equipment for an extended period,

remove any film that may be in the adapters and take the

adapters out of the adapter slot. Turn off the equipment

and unplug the power cord. To prevent accumulation of

dust inside the equipment, close the front cover.

•When performing routine maintenance

Before performing maintenance, turn the equipment off and

unplug the power cord.

If You Notice Anything Abnormal

Should you notice an unusual noise, smell, or smoke coming

from the equipment, immediately take the steps detailed below.

•Continued use could cause fire or electric shock. Turn off

the power immediately and then unplug the power cord.

After ensuring that the equipment is no longer smoking,

contact your dealer or Nikon service representative for

information on replacement or repair. DONOT attempt

repairs yourself, as this would be extremely dangerous.

- 9 -

Safety Precautions

Installation and Storage

To prevent fire or malfunction, follow the precautions given

below when operating or storing the scanner. When not in

use, cover the scanner appropriately to protect it from dust.

Do not store or use where:

•

the temperature is above 35°C (95°F) or below 10°C (50°F),

the temperature changes drastically, or condensation occurs

• the humidity exceeds 80%

• the scanner would be exposed to direct sunlight

• there is a lot of dust

- 10 -

Safety Precautions

• the scanner may be subject to excessive vibration or physical

shock

Note that the scanner contains glass parts; if the scanner is

dropped or otherwise damaged, caution must be observed to

avoid broken glass.

• the scanner would be exposed to radio interference from

other equipment nearby

• close to other objects that would block the scanner’s vents

Altri manuali per LS-2000

Indice

Altri manuali Nikon Scanner per pellicole

Nikon

Nikon LS-2000 Manuale utente