NIMO ETS 1500 Manuale utente
ETS 1500
ETS 1500 F
427000544
EN Drying Cabinet User Manual
Keep this user ma-
nual in a safe place,
so that it will always
be on hand for fu-
ture reference.
Dear NIMO customer,
Congratulations on making an excellent choice and welcome to the NIMO family.
NIMO is a global family with its roots in Sweden.
NIMO thanks you for your condence and hopes that you will enjoy using your new
drying cabinet.
A good drying cabinet should be well designed, dry clothes well, have a low environmental
impact, be user friendly, save time, have a long life and be reliable. NIMO offers you all
of these features.
When you buy a NIMO product you can be sure that the inside is as good as the outside
and that the ethics and morale that go into building this product are just as high as the
quality and functionality you are getting. That’s what Swedish quality is all about.
Before using the product for the rst time, please read the user instructions and the
advice on caring for the product. This will help you get the best possible results from your
product and all its functions.
If you have any questions, don’t hesitate to call us or contact us via our website.
Best wishes from Sweden and the NIMO team.
Doc. No: 427000544 Rev. 05
We reserve the right to make
alterations.
Manufacturer: NIMO-VERKEN AB Box124
S-548 22 HOVA
Sweden
Ph +46 (0) 506 488 00
Fax +46 (0) 506 488 10
www.nimoverken.com
ARTICLE AND SERIAL NUMBER
See page 17
3
CONTENTS
ABOUT THIS USER MANUAL
The contents of this user manual describe the
dryer functions and how it should be used.The
manual also includes instructions for installa-
tion and maintenance.
IMPORTANT SAFETY INFORMATION 4
AREA OF USE 4
TECHNICAL SAFETY 5
FOR A GOOD ENVIRONMENT 6
PACKAGING MATERIAL 6
MANAGEMENT OF
ENDOFLIFE DRYING CABINET 6
INSTALLATION 7
UNPACKING 7
FITTING THE DOOR HANDLE 8
REHANGING THE DOOR 8
POSITIONING 9
EXHAUST CONNECTION,
MODEL ETS 1500 10
EXHAUST, MODEL ETS 1500F 12
ELECTRICAL CONNECTIONS 13
USING FOR THE FIRST TIME 14
USING THE DRYING CABINET 15
STARTING 15
POSITIONING THE WASHING 15
USER TIPS 15
AIR FLOW 15
SETTINGS 16
CARE 17
CLEANING 17
SERVICE 17
REPLACEMENT PARTS 17
TROUBLE SHOOTING 18
TECHNICAL DATA 19
4
IMPORTANT SAFETY INFORMATION
AREA OF USE
CAUTION This equipment is intended only to be used to dry fabrics
washed in water.
pApplicable to installation in the EU
This drying cabinet can be used by children over the age of 8 and
persons (including children) with various disabilities or inadequate
experience and knowledge, provided they are kept under supervi-
sion or are given instructions on how to use the appliance in a safe
way and understand the risks that use entails.
Children must not play with the appliance.
pApplicable to installation in countries outside the EU
The appliance is not intended for use by persons (including children)
with various disabilities or inadequate experience and knowledge.
They may use the appliance only under supervision or if they have
received instructions on how to use the appliance from a person
who is responsible for their safety.
Children must be supervised to ensure that they do not play with
the appliance.
This drying cabinet meets applicable safety requirements. Incorrect use
may, however, lead to injuries and damage to property.
The advice and caution notices in this manual have been written to en-
able you to avoid incorrect use and unnecessary risks of accidents, and
should be read before installing and using the drying cabinet.
5
TECHNICAL SAFETY
pCheck the drying cabinet for visible signs of damage before install-
ing it. A damaged drying cabinet must not be used as it may pose a
hazard.
pThe drying cabinet must be installed and kept indoors.
pThe drying cabinet may only be connected to an earthed power
socket installed in accordance with applicable safety instructions.The
wall socket must be accessible after installation so that the power
supply to the drying cabinet can be disconnected at any time.
pMake sure that the data on the drying cabinet identication plate
(fuse, voltage and frequency) agrees with that of the mains power
supply at the site of installation.
pDo not connect the drying cabinet to the power supply with an
extension lead as the necessary safety cannot be guaranteed (risk
of overheating).
pIf the power cord is damaged, it must be immediately replaced, and
this must be done only by the manufacturer, the manufacturer's
service agent or similarly qualied persons in order to avoid danger.
IMPORTANT SAFETY INFORMATION
6
FOR A GOOD ENVIRONMENT
PACKAGING MATERIAL
The packaging that protects the drying cabinet
against damage in transit has been chosen with
concern for the environment in mind and is
therefore recyclable.
Recycled packaging means reduced consump-
tion of raw materials and lower levels of waste.
MANAGEMENT OF END-OF-LIFE
DRYING CABINET
When the drying cabinet has reached the end
of its life, it must be taken to a recycling centre
for disposal. Many parts can be re-used, but the
cabinet also contains other material that must
be handled correctly.You should therefore never
dispose of a drying cabinet or parts of a cabinet
with the domestic refuse as this can lead to health
risks and harm the environment.
Take the end-of-life drying cabinet to a recycling
station instead. Check with your dealer if neces-
sary.
All the plastic parts of the drying cabinet are
marked with internationally standardised sym-
bols. The parts can therefore be recycled in an
environmentally friendly way by waste separation.
7
2
3
4
1
5
2
5
6
3
7
14
8
6
9
__________________________________
Check that the goods have not been damaged in
transit. Any damage should be reported to your
dealer within 7 days.
After unpacking, check that the goods are in good
condition. Damage, faults and any missing parts
should be immediately reported to your carrier.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
INSTALLATION
Qty.
1. Draft stabilizer 1
2. Hose 1
3. Spigot 1
4. Screw TRX 5x70 fzk 7
5. Washer NB 5x25 4
6. Plastic plug 7
7. Spacer 8.2x12x15 4
8. Door handle incl. screws 1
9. Supporting bracket 1
Assembly kit model ETS 1500
Complete delivery should include:
pA cabinet with a fan unit installed
pAssembly kit
pUser manual
__________________________________
Check that all transportation aids have been
removed before connecting the dryer.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
__________________________________
Packaging materials such as plastic and styro-
foam should be kept out of the reach of children.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
Assembly kit model ETS 1500F
Qty.
1. Screw TRX 5x70 fzk 7
2. Washer NB 5x25 4
3. Plastic plug 7
4. Spacer 8.2x12x15 4
5. Supporting bracket 1
6. Door handle incl. screws 1
______________________________________
NOTE: Thedrying cabinetshouldbe handled ca-
refully if it is only standing on its wooden
pallet! RISK OF TIPPING OVER!
______________________________________
UNPACKING
8
2
1
3
4
MAN
60°
40° -+
MAN40° 2:30
C
START
STOPP
ON
OFF
ECODRYER
REHANGING THE DOOR
The door can be hinged on the left or the right.
1Lay the dryer down on its back.
2
Open the door fully and support it in its open
position using a chair or similar. The door must
not be opened more than 180°.
3Release the four screws retaining the control
module. The screws are on the top of the
control module.
4Slant the module out so as to gain access to
the lower hinge pivot pin.
5Close the door.
6Release the lower pivot pin using a set
spanner and remove the door.
7Release the upper pivot pin with a
screwdriver and move the pin over to the
opposite side. First release the plastic plug
and press it in on the opposite side.
8Rotate the door, oer up the door and screw
it in place with the lower pivot pin.
9Ret and retighten the screws on thecontrol
module.
1. Control module
2. Upper hinge pin
3. Screwdriver
4. Lower hinge pin
FITTING THE DOOR HANDLE
Fit the door handle with the xing screws supp-
lied.
The illustration shows
model ETS 1500
______________________________________
WARNING! The plug must be unplugged from
the wall socket.
______________________________________
INSTALLATION
9
5
47
6
3
230 mm 1
2
1450 mm
1. Supporting bracket
2. Pre-drilled holes
3. Attachment screw with washer
4. Plastic plug
5. Wall behind the drying cabinet
6. Spacer
7. Drying cabinet back wall
The illustration
shows model
ETS 1500
_____________________________________________
The drying cabinet must be installed and kept indoors.
_____________________________________________
____________________________________________
The drying cabinet must not be installed where high-
pressure water jets are used for cleaning.
____________________________________________
The drying cabinet can conveniently be installed
above a front-loading washing machine.
____________________________________________
However, it must hang on the wall and not placed directly
on top of the washing machine. This is to avoid vibration
when the washing machine is running. A supporting
bracket is supplied with the drying cabinet.
____________________________________________
1
Mark up for the supporting bracket and secure it to the wall
with screws. Screws are supplied in the installation kit.
2 Hang up the cabinet.
The cabinet must be secured to the wall to prevent it tipping
forward.
3
Open the door and drill 8 mm holes in the wall through the
four pre-drilled holes in the rear of the drying cabinet.
4
Insert plastic plugs in to the holes in the wall. Place a spacer
on the screw and install with a washer as shown in the il-
lustration. Screws are supplied in the installation kit.
____________________________________________
WARNING! The drying cabinet must not be used unless
it is xed to the wall, due of the risk of tip-
ping forward.
____________________________________________
POSITIONING
INSTALLATION
10
12
3
Air intake
___________________________________
The air intake must not be blocked.
___________________________________
1. Draft stabilizer
2. Hose
3. Spigot
EXHAUST CONNECTION, MODEL ETS 1500
___________________________________
The drying cabinet must not be connected to
a replace chimney.
___________________________________
pFit the spigot supplied to the hose. Ax
the spigot and hose to the dryer top.
Connect the other end of the hose to the
draft stabilizer which should then be rmly
attached to the exhaust air valve.
When the drying cabinet is working, 45 m³ of moist air are evacuated per hour. This air is taken
from the room where the dryer is sited. Hence make sure air can enter the room to replace the
moist air leaving.
1. By means of a draft stabilizer
The drying cabinet should be connected to a standard register.
The drying cabinet can be connected to an exhaust duct in two ways: either with a draught inter-
rupter or rigidly connected to an exhaust air ventilation system.
If the drying cabinet is to be connected to an existing ventilation system, a draught interrupter must
always be used, so that the general ventilation in the room is not aected.
Only use a rigid connection when a separate exhaust air duct has been provided for the drying cabinet.
The air ow in the exhaust duct should be adjusted to 45 m³/hour.
The drying cabinet has been tested and set at the factory for connection with a draught interrupter.
Humid air out
INSTALLATION
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali NIMO Asciugatrice
NIMO
NIMO ECO Dryer 2.0 HP Manuale utente
NIMO
NIMO ECO Dryer 2.0 HP Manuale utente
NIMO
NIMO KM 80 Manuale utente
NIMO
NIMO FT 120 VP Manuale utente
NIMO
NIMO ETS 1700E Manuale utente
NIMO
NIMO Easy Dryer 1900 Manuale utente
NIMO
NIMO PRO FT 120 FL Manuale utente
NIMO
NIMO KM 80 Manuale utente
NIMO
NIMO ETS 1500 E Manuale utente
NIMO
NIMO Easy Dryer 1700 Manuale utente
