Nintendo Mv1-7.1 Manuale utente
Mv1-7.1 installation manual
Installation guide
Required Items:
Recommended Tools:
1. MicroSD card containing atmospheric integration
package and genuine SanDisk card are recommended.
2. Mv1-7.1 cracking chipset
3. Nintendo switch V1 (Erista) / V2 (Mariko)
4. Tip soldering iron (340c) / solder
5. Y00 human screwdriver and #00 Philips cross
screwdriver
6. CPU heat dissipation paste
1. Liquid flux
2. Electronic magnifying glass or head mounted
magnifying glass
3. Alcohol (more than 91%)
4. Cotton swab / scissors
5. Kapton heat resistant tape / electrical tape
1
2
3
4
5
6
7
8
GENTLY BEND BACK THE CABLE
AND IT TO THE CHIP,CONNECT
THEN LAY IT FLAT AGAIN
IT SHOULD LINE UP
WITH THE PLUP.NAND
PRESS DOWN TO SECURE
THE CONNECTION
9
Assemble all removed parts again,
replace the cleaned heat dissipation
paste, and cut a little antimagnetic
wave so that the cable can pass through.
Cut off part of the metal
back plate, and use
heat-resistant adhesive
tape for insulation
protection. Finally,
the shell will not be tilted
after installation.
Install the NAND module
and fix it with adhesive tape.
Indice
Altri manuali Nintendo Hardware per computer
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
