8
Setting the timer
1. Press “Timer” button.
2. Press the number buttons to set the timer.
Maximum timer: 99minutes 99 seconds
3. Press “Start/Stop” button to confirm. The timer
begins to count down.
4. When timer countdown is over, the appliance will
beep.
Note:
Before timer expires, you can press “Timer” button
then “Reset” button to cancel it.
The timer only functions as a countdown reminder
while the appliance is not working.
Safety lock
With the safety lock function, the appliance’s control
panel can be protected from unintentional touch.
To lock/unlock the control panel, press and hold
“Reset” button for 3 seconds.
Manual Cooking Mode: One stage
In this mode, users need to manually set power level
and cooking time.
1. In Standby or Clock mode, press “Power” button
repeatedly to select the desired power level.
Power Display Level Remarks
100% P100 High For quick and
thorough
cooking
90% P90
80% P80 Medium
High
For medium
express cooking
70% P70
60% P60 Medium For frying food
50% P50
40% P40 Medium
low
For defrosting
food
30% P30
20% P20 Low For keeping
warm
10% P10
2. Press number buttons to set the cooking time
as needed. (Cooking time range: 1 second - 99
minutes 99 seconds)
3. Press “Start/Stop” to confirm and start cooking.
Remaining cooking time will be shown.
4. When cooking time expires, the oven will beep
and show “End” on the display.
Example: To cook with power level P80 and cooking
time 10 minutes
Step1: Press “Reset” button to enter standby.
Step2: Press “Power” button 3 times to select
power level P80. “P80 will be shown.
Step3: Press number buttons “1” “0” “0” “0” to
select cooking time 10 minutes. “10:00”
will be shown.
Step4: Press “Start/Stop” to confirm and start.
The cooking time will start to count
down.
Note:
• If to turn over food during cooking, just open
the door directly. Turn food over and close door.
Then press “Start/Stop” again to continue
cooking.
• If to remove food before the preset time, it is
recommended to press “Reset” to clear the
previous setting to avoid unintentional operation
next time.
• After cooking, if the door not opened or “Reset”
button not pressed, the appliance will keep
beeping 3 times every 2 minutes.
Manual Cooking Mode: Two Stages
To obtain best cooking result, some recipes call for
different cook modes and time.
Example: To cook with P100 microwave for 3
minutes then P20 for 9 minutes
Step1: Press “Reset” button to enter standby.
Step2: Press “Power” button once. “P100” will
be shown.
Step3: Press number buttons “3” “0” “0” to
select cooking time 3 minutes. “3:00” will
be shown. Now the first stage setting is
finished.
Step4: Press “Power” button repeatedly until
“P20” is shown.
Step5: Press number buttons “9”, “0”, “0” to
select cooking time 9 minutes. “9:00”
will be shown. Now the second stage
setting is finished.
Step6: Press “Start/Stop” to confirm and start.
The cooking time will start to count
down.
DJ610_EN_A5_v1_20220419.indb 8DJ610_EN_A5_v1_20220419.indb 8 2022/4/19 09:312022/4/19 09:31
