NiSi C5 Manuale utente
C5 matte box
Back
Front
C501-103A
VND 1-5 mounting slot
Screw for top flag
(for angle adjustment)
Top flag
Screw for adapter ring
C501-102A screw for
tightening filter tray 4x5.65
Adapter ring mount
C501-102A mounting slot
Please read the instructions carefully before using this product.
C501-103A
Filter Tray For 4x4 or 100x100
C501-102A
Filter Tray For 4x5.65
67mm Adapter Ring 72mm Adapter Ring 77mm Adapter Ring 82mm Adapter Ring
78
English English
Filter installation guide： Move the limit
switch at the top of the filter holder upwards
until it stops. Insert the filter into the position
slot. Ensure that the filter tray is tightly
attached, then release the limit switch.
C501-103A
Back
C501-103A
Front
C501-102A
Front
C501-102A
Back
VND 1-5 Stops For C5
Filter position slot
Limit switch for filter
Screw for rod
Mounting hole for rod
M0.8 Gear:
Rotate the wheel manually or
attach a lens control system
Limit switch for filter
9 10
English English
1. Select the adapter ring that fits the lens
diameter, and tighten the adapter ring
clockwise on the lens.
2. Insert the adapter ring into the C5 matte box adapter ring
mount.
11 12
3
7. The top flag of the C5 matte box can be adjusted
accurately at any angle. After adjusting to a suitable angle,
tighten the screw of top flag clockwise to lock it securely.
7
3. Tighten the adapter ring locking screw clockwise to
clamp the adapter ring on to the C5 matte box.
6. Tighten the locking screw for the mounting
slot of C501-102A. This locks it securely to the C5
matte box.
6
5. Insert C501-102A into the mounting slot on the side of the C5
matte box.
5
4. Insert the C501-103A or C5 VND into the
mounting slot on the top of C5 matte box.
4
English English
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali NiSi Accessori per fotocamere
