NiteBird SL2 Manuale utente
SL2
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati
utasítás • Benutzerhandbuch
2
The product user guide contains product
features, instructions on how to use the product,
and the operating procedure. Read the user
manual carefully to get the best experience and
avoid unnecessary damage. Keep this manual for
future reference. If you have any questions or
comments about the device, please contact the
customer line.
www.alza.co.uk/kontakt
+44 (0)203 514 4411
Alza.cz a.s., Jankovcova 1522/53, 170 00 Prague 7,
www.alza.cz
3
Product Package
1. Light Strip
2. Smart Controller
3. User Manual
4. 5 Piece Adhesive Tape
LED Light Strip
Input: DC 12V, 1A
Rated Power: 12W
WiFi Frequency: 2.4GHz
Light Emitting Mode: RGB
Install the LED USB Light Strip
Please note that the front of the light strip is on
the same side as the front of the controller.
Note: Here are some tips about installing 16.4ft
LED strip lights:
1. The strip light should be stuck on a clean wall
and insulated firmly.
2. The controller cannot be perched upside
down on the wall.
3. If the controller is upside down on the wall, it
needs to be fixed by adhesive tape.
4
Upgraded Stronger 3M Adhesive
The surface should be
clean, dust free and as dry
as possible before
installation.
Tear adhesive tape, keep it
clean.
Make sure to press the
tape firmly into place
when applying, and press
for at least 10 seconds.
Fix the strip light lights
stand in the corner, the
strip lights are more
stable.
5
Download the Gosund App
1. Search “Gosund” and download the Gosund
App on the App Store or Google Play, or scan
the QR code below and install.
2. Please open the “Gosund” App. Click register
and type in your email address to
automatically create an account, or type in
your phone number to get a verification code
to register an account. If you already have a
Gosund account, simply click login and enter
your account credentials.
3. The free app “Gosund” is compatible with
mobile devices that support iOs 8.0 and above
or Android 4.4 and above.
6
Connecting the Device with App
A. Easy Mode Connection – LED Light
Strip blue lights flashing quickly
1. Press and hold the on/off button for more
than 6 seconds until the light strip flashes
quickly →Open Gosund App →Choose the “+”
symbol →“Lighting” →“Strip lights”
7
2. Make sure the Light Strip is now rapidly
flashing and confirm this in the app.
3. Choose your home WiFi (make sure that the
WiFi connection you choose is the same
connection/WiFi you used on your
phone/device, and that it is 2.4GHz, not 5GHz.)
8
4. Finally, wait for the device to successfully
configure itself, then tap “Completed”.
9
B. AP Mode
1. Please switch to “Other Mode”, press “AP
Mode”.
10
2. Press and hold the on/off button until the
Light Strip flashes slowly.
3. Make sure the Light strip is flashing slowly,
confirm in the app.
4. Choose your 2.4G WiFi, enter your password
and confirm in the app.
Indice
Lingue:
Altri manuali NiteBird Attrezzatura di illuminazione
