NitroAV NAVCBFW8EC Manuale utente

Thank you for purchasing the NitroAV “ExpressWay Series”

1394b/FireWire800 34mm Express Card. Express Card

technology promises faster throughputs and flexibility. NitroAV

specializes in 34mm version because they are backwards

compatible with 54mm Express Card slots. It supports Notebook

OSX, Windows and Linux (latest rev) with an Express Card Slot.

Express Card is the newest expansion slot for modern Notebook

and Laptop computers.

Features:

Fully IEEE1394b OHCI compliant, integrated TI OHCI chip-set, 34mm

Express Card form factor.

Up to 800Mbits/sec IEEE 1394b FireWire800 transfer rate

Supports two 9-pin IEEE 1394b FireWire800 connectors

Provides a mini-DC-jack for 1394 bus power input

NitroAV FireWire800/1394b

Express Card (34mm)

Installation Guide

1. Introduction

2. Layout

ExpressCard

Connector

+12VDC/1.5A Mini DC

Jack for 1394b Bus Power Input

IEEE 1394b connectors (9-pin, Bilingual)

ExpressCard

IEEE 1394b FireWire800 Express Card

The ‘ExpressWay Series’ makes the installation of the Express

Card quite easy.

1. Before touching the Express Card, please touch any metal

surface with your hand to discharge any potential static.

2. With the color label facing up, insert the Express Card into

the Notebook’s Express Card slot.

3. WINDOWS “Add New Hardware Wizard” window displays.

Follow the on screen instructions to complete the hardware

driver installations. (read further for details)

4. MacOSX 10.4.7 (MacBookPro) System will recognize the

Express Card through the system profiler or the card tab in

top menu bar. (read further for details)

5. Installing FireWire (IEEE 1394) cables

The IEEE 1394b Express Card has two external IEEE1394b

9-pin connectors. The cables can be used as follows (they

may not be included with this Express Card):

1394 Connectors

Available 1394 Cables

9-pin 1394b

connector

9-pin to 9-pin

9-pin to 6-pin

9-pin to 4-pin

3. Installing the Express Card

ExpressCar

IEEE 1394b FireWire800 Express Card

Note: The Express Cards do NOT supply the power over

the bus to the FireWire cables. All devices attached to the

Express Card need to utilize there own power supplies, or you

need an AC adapter to provide the power through the Mini

DC-Jack on the Express Card (at the side of the Express Card).

However, not all 1394 devices need the bus power. The DV

camcorder does not use the bus power, for example.

This Express Card can be hot-plugged to your notebook PC

due to its specifications. It supports the following operating

systems (obvious requirement is the computer must have a

Express Card slot):

OS w/Express Cards slot

Driver Supports (Kernel)

Win 2000

Yes (Note 1)

Win XP

Yes (for SP2)

MacOSX 10.4.7 (MacBookPro)

Yes (Intel Based)

The NitroAV Express Card can be hot-plugged into your

MacBookPro. Make sure you have version OSX v10.4.7 or

higher installed. Gently slide the ExpressCard into the

MacBookPro until you feel and hear the card ‘click into’ place.

A few seconds after the card is correctly seated you should see

an ExpressCard (Cardbus like icon appear in the menu bar)

5. Operating Systems OSX Notes

4. Supported Operating Systems

IEEE 1394b FireWire800 Express Card

If you select the icon, then you should see the following screen.

We are working with Apple so that in future releases we hope it

will display additional card information.

To verify your MacBookPro recognizes the NitroAV ExpressCard

correctly, please open your System Profiler (application)

located in your Utilities folder. When opened, please select

‘FireWire’ under the Hardware menu, and you should see two

different buses. Clicking on them will show which bus that

specific FireWire channel is supporting.

IEEE 1394b FireWire800 Express Card

Then please also select ‘PCI Cards’ from the selections under

hardware, and your screen should also show the ‘Express

Cards’ & ‘IEEE 1394 Open HCI’. If you have a 17” MacBookPro

then under ‘FireWire’ you will see the different buses.

If you can perform these three steps and verify the fields,

then you are all set to start plugging in FireWire devices. One

thing that has been reported in some instances - the

ExpressCards do not seat as well as the older style CardBus

(PCMCIA – Type II) adapters.

IEEE 1394b FireWire800 Express Card

MacOSX:

When removing the NitroAV ExpressCard on a MacBookPro it is

very important to follow these steps. Mixing these steps can

cause the system to hang:

1. Unmount your attached device

2. Under the menu-bar – select “Power Off Card’

3. ‘Click-Out’ the ExpressCard from the MacBookPro

6. Safely Removing the Express Card

IEEE 1394b FireWire800 Express Card

Windows 2000/XP:

If you insert the Express Card you will get a “green arrow” icon

at the bottom of the screen as you normally would when using

FireWire. After clicking this icon you will be allowed to safely

remove the Express Card afterwards:

In some cases, if the write performance of your Express Card is

not as good as you would like, please install the ExpressBooster

software supplied with your card.

1. To install the software, download from the NitroAV.com

site the setup_spbooster.exe file from the ExpressCard

page. Once the software has been copied to your

computer, double click the file to run the setup.

2. Follow the setup on-screen instructions. You will be asked

to check the Express Card item (please un-check the PCI

Express Card item). Then proceed with the rest of the

on-screen instructions to complete the installation.

7. Safely Removing the Express Card

Click this icon before removing the Express Card

8. Installing the ExpressBooster (WINDOWS)

IEEE 1394b FireWire800 Express Card

Indice

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente