4. Use the finger to push the throttle to control the power
5. Speed conversion instructions
In order to protect children and prevent riding speed from being too fast, the figure below shows the
controller plug-in connection speed limit line. The plug-in speed limit line is disconnected and turned on to
realize two speed modes.
Mode 1. The speed limit line is disconnected. the bike speed is 13km/h for 12 inch tire bicycle, and
16km/h for 16 inch tire bicycle.
Mode 2. The speed limit line is connected, the bike speed is 8km/h for 12 inch tire bicycle, and 10km/h for
16 inch tire bicycle.
The operation of this speed change switch requires an adult to operate.
6. Detail operate process
1) Unscrew the two screws at the bottom of the frame and remove the battery cover.
2) Find the speed limit line at the bottom of the frame to insert or remove to change the speed.
3) Open the power switch, push the throttle to check whether the speed changes or not.
1）2）
7. Start-up process: sit, push, push the throttle, brake, practice (Please wear personal protect equipment
in the open air or safe place under the supervision of an adult)
Unpowered training:
7.1 Turn off the power
7.2 Adjust the seat cushion position according to the height of the rider.
7.3 Use your feet on the ground to promote learning and balance.
7.4 Practice gliding and practice to control the turn.
7.5 Use the brakes to safely stop while maintaining balance.
Electric mode：
7.6 Turn on the power switch.
7.7 Place your feet on the ground, let the rider slowly move forward and practice twisting the handle and
slowly accelerate.
7.8 Let the rider practice opening and closing the switch and safely control the brake to stop.
7.9 When the rider is skillful in controlling the throttle and brake skills, place your feet on the pedals.
7.10 Please keep a safe distance between the rider and the obstacles. Pay attention to avoiding
pedestrians and pay attention to controlling the speed.
7.11 Make sure to turn the bike off before dismounting.
