7
Turning the Headset On or Off
♦To turn the Headset On Press and hold the Volume + button for 4 seconds, then you will hear two short high
tones, and the blue indicator of the Headset flashes. The Headset is now turned on. (Note: When it is on low battery,
the red indicator will flash.)
♦To turn the Headset Off Press and hold the Volume + button for 5 seconds, then you will hear two short low
tones. The Red indicator will flash, and then the Headset will turn off.
Pairing the Headset You are required to pair the Headset with your mobile phone before using the Headset.
Step 1: The Headset must be powered off before initiating the paring. Hold and keep pressing the Volume + button
for 6 seconds until the green and the red indicators are flashing alternatively. The action will takes 50sec of
period until connected to host of the Bluetooth . The headset is now ready for pairing. (If you are wearing the
Headset during the pairing process you will hear two short high tones when the Headset is ready for pairing.)
Step 2: Initiate pairing process on your Bluetooth mobile phone to pair with the Headset.
8
Step 3: When asked the Password by the mobile phone, enter 1234 and confirm it.(Note: The 1234 is a Default
pin-code pre-stored in the Headset.)
When pairing is successful, the red indicator will turn off and the green indicator will flash continuously
Note！
1. If the Headset is not in pairing mode, your mobile phone won’t find the Headset. Please set the Headset into
pairing mode before letting your mobile phone search for the Headset.
2. If no pairing is possible for a period of time (approx. two minutes), the Headset will automatically power off,
and so the previous pairing (if any) is revoked. You may need to repeat steps 1 to 3 until pairing succeeds.
