Lift handset + Dial # + Dial ext. to receive calls + Dial
code + Hang up. Codes are: 1=Unanswered calls,
2=When busy or for unanswered calls, 3=All calls. At
ESL, the Message Waiting LED flashes.
Lift handset + Dial # + Hang upCanceling:
Forwarding to an
extension:
CALL FORWARDING
USING BASIC FUNCTIONS
PLACING AND ANSWERING CALLS
Lift handset + Dial line code + Dial numberPlacing outside call:
Lift handset + Dial extension. If you hear ring-busy or
busy, you can:
•Dial 1 to get through (ring busy only)
•Dial 2 to wait off-hook, then hang up for callback
•Dial 6 to leave Message Waiting indication
Placing Intercom call:
Lift handset. If call is announced over the speaker (ESL),
you can just speak towards the phone.
Answering any call:
Note: At OPX telephones, when you see “Hookflash” press the hookswitch for
1/2 second and release.
Lift handset + Dial * 0
Answering ringing over
page speaker:
Lift handset + Dial * + Dial ringing extension
Answering a
co-worker’s call:
HOLD (Hookflash at OPX) + Hang up
Placing call on Hold: TRF (Hookflash at OPX) + Dial extension + Hang upTransfering a call:
Establish call + HLD (Hookflash at OPX) + Establish call
+ HLD (Hookflash at OPX) + Dial * #
Setting up a multiple
party call:
You made a mistake using your phone. Hang up and try again.Fast busy/warble tone:
A call is waiting to be answered. To answer: HLD
(Hookflash at OPX) + Dial * C
To alternate between calls: HLD (Hookflash at OPX) + Dial * S
Two tones during a call:
HOLD AND TRANSFER (for outside calls only)
Lift handset + HLD (Dial * 7 at OPX)Retrieving held or
Transferred call:
RESPONDING TO SIGNAL TONES
CONFERENCE
1852SLOY.QXD 7/10/98 10:04 AM Page 3
