Nixeus Fusion HD Manuale utente
Version 1.1
Fusion HD
Fusion HDFusion HD
Fusion HD
Quick Start Guide
Quick Start GuideQuick Start Guide
Quick Start Guide
Nixeus Technology, Inc.
Nixeus Technology, Inc.
2
About This Guide
This Quick Start Guide gives you the information for you to setup your unit and enjoy viewing
your multimedia files.
The user manual will describe the unit in more detail.
Please go to www.nixeus.com to download it.
or quick help, press the “ ” button on the remote control. (This key function will be
supported later through firmware upgrade.)
Nixeus Technology, Inc.
3
Safety Information
WARNING: ailure to follow these safety instructions could result in fire, electric
shock, or other injury or damage.
Read these instructions
Keep these instructions
Heed all Warnings
ollow all instructions
Do not use this apparatus near water.
Clean only with dry cloth.
Do not install near any hear sources such as radiators, stoves, or other apparatus (including
amplifiers) that produce heat.
Unplug this apparatus during lightning storms or when unused for long periods of time.
WARNING: To reduce the risk of electronic shock, do not remove the cover.
WARNING: The device can display static images, which can cause “burn in” on
certain display screens.
Avoid leaving static images (such as photos or paused video) on screen for long periods of time.
WARNING: This device should be used only indoors in well-ventilated areas. Do not
operate this device outside the temperature range of 41° ~95° To reduce the risk of fire,
electric shock, or interference, do not expose this appliance to rain, liquid, moisture, excessive
heat, or naked flame. or technical support, please go to http://www.nixeus.com
Nixeus Technology, Inc.
4
CAUTION: About Laser and LED
Use of controls or adjustments, or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
This device complies with International Standard IEC 60825-1:2001-08 for a Class 1 and Class 2
laser product.
This device also complies with 21C R 1040.10 and 1040.11 except for deviations pursuant to
Laser Notice No. 50, dated July 26, 2001.
Class 1 Laser Devices
Beam description: Collimated (parallel) beam of infrared light (invisible to user)
Laser power output: ＜ 716 microwatts (at 832 nanometers) to 834 microwatts (at 865
nanometers)
Emitted laser wavelength: nominal: 850 nanometers, range: (832 – 865 nanometers)
A Class 1 laser product is safe under reasonable foreseeable conditions of operation as
described by IEC 60825-1 and 21 C R 1040.10. However, it is recommended that you not direct
the laser beam (which is emitted from the bottom of the device) at
anyone’s eyes.
Nixeus Technology, Inc.
5
Package Contents
The product package should contain the following items:
• usion HD media player
• Remote Control/AAA batteries * 2
• USB Wi- i Dongle
• 12V/2.5A Power supply
• Mini USB to A type USB cable
• HDD SATA Data and power cable (attached in the box)
• AV phone jack to RCA cable
• LAN Cable
• 4 screws for mounting HDD
• Quick Start Guide
WARNING: Ensure you use the power adapter shipped with the unit.
Other power adapters may damage or even destroy the unit.
Nixeus Technology, Inc.
6
ardware Overview
Front View
No# Front Panel Description
○
Power on/Standby LED
“Red”: ●
The power supply is attached but the device has not been powered on
yet or the device has been powered off after use.
“Orange” ●: The device is in stand by or in the process of turning on.
“Green” ●The device is operating.
○
3
Remote control LED
○
4
Remote sensor
○
5
eSATA port
○
6
USB host port
○
7
USB client port
○
8
Power On /Off button
○
7
○
○
4
○
3
○
5
○
6
○
8
Nixeus Technology, Inc.
7
Rear View
No# Rear Panel Description
○
Power Adaptor
○
2
LAN
○
3
USB host port
○
4
S/PDI Optical connector
○
5
S/PDI Coaxial connector
○
6
A/V Phone Jack
○
7
HDMI port
Standby Mode: When you press the Power key on the remote control or the On/Off button on
the unit, the system will enter standby mode.
Power Off: If you want to power off the system, please press the power key on the remote
control for more than 2 seconds when the unit is operating or the On/Off button for more than 5
seconds when the unit is in standby mode.
Do Not press the On/Off button for more than 5 seconds when the unit is operating, because this
will force the unit to power-off and some data may be lost (eg. BitTorrent downloaded data)
○
2
○
5
○
6
○
4
○
3
○
○
7
Nixeus Technology, Inc.
8
Installation and Connection
Video & Audio
The HDMI port is used for connecting your unit to your TV so you can view high-definition
video and audio.
The Optical and Coaxial S/PDI connections are for connecting your unit to an external
decoder or amplifier for high definition audio.
Press the hotkey button on the remote control and go to ‘System Setup’ → ‘Audio
Setup’ to select Analog or Digital Audio Output.
The A/V Phone jack is for connecting your unit to the CVBS/Analog audio RCA connectors
on your TV. The adapter cable pictured below is included in the product package.
Nixeus Technology, Inc.
9
Storage Devices
The eSATA port is for connecting the unit to your PC so that you can copy files from your
PC to the device. eSATA connections are faster than the USB client ports on the device.
The USB client port is another option for you to connect the unit to your PC and copy files
from your PC to the unit.
The USB host port can be used to connect external HDD enclosures, flash drives, Wi- i
Dongles, Mice or keyboards to the unit.
Network Connection
The Ethernet port or wireless dongle are used to connect the unit to your home network router
for local area network (LAN) or Internet connections.
Nixeus Technology, Inc.
0
DD Installation
To install a HDD into your unit, follow the instructions below.
1. Use a screwdriver to remove the screws on the device.
2.
Carefully remove the top cover.
3.
it the HDD in as shown below.
Altri manuali per Fusion HD
1
Indice
