Nokia 515 Dual SIM Manuale utente
User Guide
Nokia 515 Dual SIM
Issue 2.1 EN
Psst...
This guide isn't all there is...
The instructions in this user guide are based on the latest available software version. If your device
has not been updated to the latest available software, there may be differences in the availability
and functionality of some features.
For info on Microsoft Mobile Service terms and Privacy policy, go to www.nokia.com/privacy.
© 2014 Microsoft Mobile. All rights reserved. 2
Contents
Psst... 2
For your safety 4
Get started 5
Keys and parts 5
Insert a SIM card and battery 5
Insert a second SIM card 7
Insert a memory card 7
Charge the battery 8
Set which SIM card to use 9
Copy content from your old phone 9
Basics 11
Explore your phone 11
Display indicators 12
Prolong battery life 12
Personalise your home screen 13
Change your ringtone 13
Set a song as your ringtone 13
Nokia Store 14
Write text 14
People & messaging 15
Make or answer a call 15
Save a name and phone number 15
Add social info to contacts 16
Send a message 16
Check your voice mail 16
Mail for Exchange 17
Set up your mail account 17
Send a mail 18
Get social 18
Camera 20
Take a photo 20
Take a self-portrait 20
Take a panorama photo 21
Send a photo or video 21
Internet 22
Browse the web 22
Add a website to your favourites 22
Entertainment 23
Listen to the radio 23
Play a song 23
Office 25
Add a calendar entry 25
Change the time and date 25
Set an alarm 25
Phone management & connectivity 26
Share your content using Slam 26
Copy content between your phone and a
computer 26
Back up content to a memory card 27
Update your phone software 27
Access codes 27
Product and safety info 29
User Guide
Nokia 515 Dual SIM
© 2014 Microsoft Mobile. All rights reserved. 3
For your safety
Read these simple guidelines. Not following them may be dangerous or illegal. For further info, read
the complete user guide.
SWITCH OFF IN RESTRICTED AREAS
Switch the device off when mobile phone use is not allowed or when it may cause interference
or danger, for example, in aircraft, in hospitals or near medical equipment, fuel, chemicals, or
blasting areas. Obey all instructions in restricted areas.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first
consideration while driving should be road safety.
INTERFERENCE
All wireless devices may be susceptible to interference, which could affect performance.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
BATTERIES, CHARGERS, AND OTHER ACCESSORIES
Use only batteries, chargers, and other accessories approved by Microsoft Mobile for use with
this device. Do not connect incompatible products.
KEEP YOUR DEVICE DRY
Your device is not water-resistant. Keep it dry.
GLASS PARTS
The device screen is made of glass. This glass can break if the device is dropped on a hard
surface or receives a substantial impact. If the glass breaks, do not touch the glass parts of
the device or attempt to remove the broken glass from the device. Stop using the device until the
glass is replaced by qualified service personnel.
PROTECT YOUR HEARING
To prevent possible hearing damage, do not listen at high volume levels for long periods.
Exercise caution when holding your device near your ear while the loudspeaker is in use.
© 2014 Microsoft Mobile. All rights reserved. 4
Get started
Get to grips with the basics, and have your phone up and running in no time.
Keys and parts
Explore the keys and parts of your new phone.
1 Micro-USB connector
2 Headset connector (3.5 mm AHJ)
3 Volume keys
4 Scroll key
5 End/Power key
6 Back cover release hole
7 Microphone
8 Call key
9 Selection keys
10 Earpiece
11 Camera flash
12 Camera lens. Before using the camera,
remove the protective tape from the lens.
13 Back cover opening tool. If you lose the tool, you can also use a paper clip.
14 Antenna area
15 Loudspeaker
Tip: Lock the keys when not using your phone. Select Menu, and press *. To unlock, select
Unlock, and press *.
Your phone uses S40 software.
Avoid touching the antenna area while the antenna is in use. Contact with antennas affects the
communication quality and may reduce battery life due to higher power level during operation.
Do not connect to products that create an output signal, as this may damage the device. Do not
connect any voltage source to the audio connector. If you connect an external device or headset,
other than those approved for use with this device, to the audio connector, pay special attention to
volume levels.
The images in this guide may differ from your device screen.
Insert a SIM card and battery
Learn how to insert a SIM card and the battery.
The SIM1 holder can be used for both 3G and 2G SIMs.The SIM2 slot can only be used for 2G SIMs.
1. Push the tool into the hole until the cover is released. Remove the back cover.
2
2
© 2014 Microsoft Mobile. All rights reserved. 5
2. If the battery is in the phone, lift it out.
3. Push the SIM in with the contact area face down.
4. Line up the battery contacts, and put the battery in.
5. Press the back cover down until it locks into place. To switch the phone on, press and hold the
power key until the phone vibrates.
Note: Switch the device off and disconnect the charger and any other device before removing
any covers. Avoid touching electronic components while changing any covers. Always store and
use the device with any covers attached.
Important: To prevent damage to the SIM card, always remove the battery before you insert or
remove the card. Only applies to SIM1.
© 2014 Microsoft Mobile. All rights reserved. 6
Important: Your device uses a micro-SIM card, also known as a mini-UICC SIM card. Use of
incompatible SIM cards, or use of SIM card adapters, may damage the card or the device, and
may corrupt data stored on the card.
Insert a second SIM card
You can easily add a second SIM card (SIM2) without removing the battery.
1. Push the tool into the hole until the cover is released. Remove the back cover.
2. Push the SIM in with the contact area face down until it locks into place. The SIM2 slot can only be
used for 2G SIMs.
3. To remove the SIM, push the card in until it's released, then pull it out.
If you only have one SIM card, put the card into the SIM1 card holder. Some features and services
may only be available when using the SIM card in the SIM1 card holder. If there is a SIM card only in
the SIM2 card holder, you can only make emergency calls.
Both SIM cards are available at the same time when the device is not being used, but while one SIM
card is active, for example, making a call, the other may be unavailable.
Insert a memory card
Learn how to insert a memory card into your phone.
Use only compatible memory cards approved for use with this device. Incompatible cards may
damage the card and the device and corrupt data stored on the card.
© 2014 Microsoft Mobile. All rights reserved. 7
1. Push the tool into the hole until the cover is released. Remove the back cover, and lift out the
battery.
2. Slide the memory card into place with the contact area face down.
3. To remove the card, pull it out.
Important: Do not remove the memory card when an app is using it. Doing so may damage the
memory card and the device and corrupt data stored on the card.
Charge the battery
Your battery has been partially charged at the factory, but you may need to recharge it before you
can use your phone.
1. Plug the charger into a wall outlet.
2. Connect the charger to the phone. When done, unplug the charger from the phone, then from the
wall outlet.
© 2014 Microsoft Mobile. All rights reserved. 8
If the battery is completely discharged, it may take up to 20 minutes before the charging indicator
is displayed.
Tip: You can use USB charging when a wall outlet is not available. Data can be transferred while
charging the device. The efficiency of USB charging power varies significantly, and it may take
a long time for charging to start and the device to start functioning.
Make sure your computer is switched on.
Set which SIM card to use
You can set the default SIM card to use to make a call, send a message, or connect to the internet.
If you name your SIMs, you can see at a glance which is, for example, for work and which is for personal
use.
1. Press and hold *.
2. To decide every time which SIM to use, select Ask every time.
3. Select SIM1 or SIM2 to set which SIM to use for which connection.
Rename your SIM card
Select Options > Rename.
Copy content from your old phone
Easily get your contacts, calendar entries, and other stuff to your new phone.
1. Switch Bluetooth on in both phones. To switch Bluetooth on on your new phone, select Menu >
Settings > Connectivity > Bluetooth.
2. On your new phone, select Menu > Settings > Sync & backup > Copy from dev..
© 2014 Microsoft Mobile. All rights reserved. 9
3. Select what you want to copy, then select Done.
4. Choose your old phone from the list of found devices.
5. If asked, create a one-time passcode (such as 123), and select OK.
6. Check that the codes match on both phones.
7. Follow the instructions shown on both phones.
Tip: To quickly copy contacts from a compatible phone, select Menu > Apps > My apps >
Transfer.
© 2014 Microsoft Mobile. All rights reserved. 10
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Nokia Telefono cellulare
Nokia
Nokia 6020 - Cell Phone 3.5 MB Manuale utente
Nokia
Nokia 10 Manuale utente
Nokia
Nokia N81 Manuale utente
Nokia
Nokia N800 - Internet Tablet - OS 2007 Manuale utente
Nokia
Nokia 3230 - Smartphone 6 MB Manuale utente
Nokia
Nokia MU-37 Manuale utente
Nokia
Nokia 6230i - Cell Phone 32 MB Manuale utente
Nokia
Nokia 6670 - Smartphone 8 MB Manuale utente
Nokia
Nokia X2-05 Guida rapida
Nokia
Nokia E71 Manuale utente
Nokia
Nokia E70 Manuale utente
Nokia
Nokia 7110 - Cell Phone - GSM Manuale utente
Nokia
Nokia 700 Manuale utente
Nokia
Nokia RM-235 Manuale utente
Nokia
Nokia 8265i Manuale utente
Nokia
Nokia 5310 XpressMusic Manuale utente
Nokia
Nokia 6650 - Smartphone 40 MB Manuale utente
Nokia
Nokia 3650 - Smartphone 3.4 MB Manuale utente
Nokia
Nokia 130 Manuale utente
Nokia
Nokia Lumia 1520 Manuale utente
