Nokia NSB-8 Istruzioni per l'installazione

Altri manuali Nokia Telefono cellulare

Manuali Telefono cellulare popolari di altre marche

Zte

Zte BLADE A520 Manuale utente

Blackbe;rry

Blackbe;rry KEYone Manuale utente

Bea-fon

Bea-fon X5 Premium Manuale utente

Blackbe;rry

Blackbe;rry 8707 Series Manuale utente

Blackbe;rry

Blackbe;rry Storm Istruzioni operative

LG

LG LM-X420QN Manuale utente

LifeWatch

LifeWatch V Manuale utente

Bea-fon

Bea-fon SILVER LINE SL860 Manuale utente

IKI Mobile

IKI Mobile KF4.5i Manuale utente

Hitech

Hitech HT-850 Manuale utente

Yezz

Yezz Fashion F10 Manuale utente

Point Mobile

Point Mobile PM60 Manuale utente

Blackbe;rry

Blackbe;rry Q10 Manuale utente

Blackbe;rry

Blackbe;rry Bold 9900 Manuale utente

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Manuale utente

LG

LG LM-K420EMW Manuale utente

ISAFE MOBILE

ISAFE MOBILE IS655.2 Manuale utente

LG

LG Thrive Manuale utente

PAMS Technical Documentation

NSB-8 Series Transceivers

Issue 1 01/02 ãNokia Corporation

Assembly & Disassembly

Instructions

NSB-8

Assembly & Disassembly Instructions PAMS Technical Documentation

Page 2 ãNokia Corporation Issue 1 01/02

Table of Contents Page No

Disassembling the NSB-8 Transceiver.......................................................................... 3

Assembling the NSB-8 Transceiver............................................................................... 9

PAMS Technical Documentation Assembly & Disassembly Instructions

NSB-8

Issue 1 01/02 ãNokia Corporation Page 3

Disassembling the NSB-8 Transceiver

1

2

3

Remove Battery cover.

Remove Battery.

1

2

NSB-8

Assembly & Disassembly Instructions PAMS Technical Documentation

Page 4 ãNokia Corporation Issue 1 01/02

Remove A-cover.

When a new

A-cover is set

remove the inner

protective layer.

Remove Keypad

(only if it is necessary to

replace keypad).

In assembly place A-cover

pins (4 pieces) in respective

holes in the keypad.

PAMS Technical Documentation Assembly & Disassembly Instructions

NSB-8

Issue 1 01/02 ãNokia Corporation Page 5

Remove the 6 screws.

Drive size is torx plus 6.

Note! Screws contain thread

locking compound. Used screws

must be scrapped and not used

again.

Remove UI module.

1. Use plastic tweezers or similar

tool to gently press the UI module

locking snap.

2. Carefully lift up the UI module.

1

2UI handling precautions!

Do not damage the following

items when handling the UI

module:

1. Speaker spring contacts.

2. LCD driver.

3. LCD contact pads.

4. UI PWB contact pads.

5. UI frame metal coating.

1.

3.

2.

4.

5.

6.

NSB-8

Assembly & Disassembly Instructions PAMS Technical Documentation

Page 6 ãNokia Corporation Issue 1 01/02

Remove speaker

(only if it is necessary to

replace speaker).

Speaker can be lifted up

using a straight-bladed

screwdriver as shown in

the picture.

Note! Do not touch

speaker springs or

membrane.

UI handling precautions!

1. Speaker spring contacts.

2. LCD driver.

3. LCD contact pads.

4. UI PWB contact pads.

5. UI frame metal coating.

1.

3.

2.

4.

5.

PAMS Technical Documentation Assembly & Disassembly Instructions

NSB-8

Issue 1 01/02 ãNokia Corporation Page 7

Remove System connector

Note! Do not damage the

spring contacts in the

System connector.

Remove System Module

System Module handling

precautions!

Do not touch the following

spring contacts when

handling the module:

1. LCD connector.

2. Board to board connector.

1. 2.

NSB-8

Assembly & Disassembly Instructions PAMS Technical Documentation

Page 8 ãNokia Corporation Issue 1 01/02

Remove SIM cover

(only if it is necessary to replace

SIM cover).

3. Turn the SIM cover to

upright position.

4. Squeeze the SIM cover

slightly from the side to

release the side fixings one

at the time.

1. Slightly lift the front edge

of the SIM cover to unlocked

position

2. and slide it backwards.

1

4

55. Pull SIM cover out of B cover.

3

2

PAMS Technical Documentation Assembly & Disassembly Instructions

NSB-8

Issue 1 01/02 ãNokia Corporation Page 9

Assembling the NSB-8 Transceiver

1. Insert SIM cover into B-cover.

2

2. Squeeze the SIM cover from the

side and insert into the appropriate

slots in the B-cover.

3

3. Tilt SIM cover down.

4. Slide forward.

4

NSB-8

Assembly & Disassembly Instructions PAMS Technical Documentation

Page 10 ãNokia Corporation Issue 1 01/02

1. Insert System Connector.

2. Insert System Module.

A

B

C

D E 3. Obtain UI Module

Use caution handling the following:

A. Speaker spring contacts

B. LCD driver

C. LCD contact pads

D. PWB contact pads

E. Frame metal coating