Nokia BH-940 Manuale utente
Nokia Purity Pro Bluetooth Stereo Headset by Monster User Guide
Issue 1.0
Safety
Read these simple guidelines. Not following them may be dangerous or illegal. For
further info, read the complete user guide.
SWITCH OFF IN RESTRICTED AREAS
Switch the device off when cell phone use is not allowed or when it may
cause interference or danger, for example, in aircraft, in hospitals or near
medical equipment, fuel, chemicals, or blasting areas. Obey all instructions
in restricted areas.
BATTERIES, CHARGERS, AND OTHER ACCESSORIES
Use only batteries, chargers, and other accessories approved by Nokia for
use with this device. Do not connect incompatible products.
PROTECT YOUR HEARING
To prevent possible hearing damage, do not listen at high volume levels for
long periods. Exercise caution when holding your device near your ear while
the loudspeaker is in use.
2
Introduction
About your headset
The Nokia Purity Pro Bluetooth Stereo Headset by Monster combines superior audio
quality with ease of use. Handle calls hands-free, or listen to your favorite tracks. Just
unfold the headset, put it on, and you're ready to go.
The audio quality doesn't have to suffer in noisy environments - active noise
cancellation (ANC) takes out unwanted background noise.
The surface of this product is nickel-free.
Warning:
This product may contain small parts. Keep them out of the reach of small children.
Parts of the product are magnetic. Metallic materials may be attracted to the product.
Do not place credit cards or other magnetic storage media near the product, because
info stored on them may be erased.
Read this user guide carefully before using the product. Also, read the user guide for
the device that you connect to the product.
Warning:
When you use the headset, your ability to hear outside sounds may be affected. Do
not use the headset where it can endanger your safety.
Obey all local laws. Using a mobile phone or some its features while driving may be
prohibited. Always keep your hands free to operate the vehicle while driving. Your
first consideration while driving should be road safety.
For support, go to www.nokia.com/support.
About Bluetooth connectivity
You can use Bluetooth to make a wireless connection to other compatible devices,
such as mobile phones.
Devices do not need to be in direct line-of-sight, but they must be within 10 meters
(33 feet) of each other. The connection may be affected by obstructions such as walls
or other electronic devices.
3
This device is compliant with Bluetooth Specification 3.0 supporting the following
profiles: A2DP (1.2), HFP (1.6), HSP (1.2) and AVRCP (1.4) . Check with the
manufacturers of other devices to determine their compatibility with this device.
About compatibility
You can use your headset with all kinds of devices, but not all devices support all
features or connection types.
Wireless
(Bluetooth)
connection
Wired connection
Compatible phones Other devices with
3.5 mm audio
connector
Music playback Yes Yes Yes
Hands-free calling Yes Yes No
Media controls Yes Yes No
Volume controls Yes Yes No
Nokia Symbian, Nokia S40, and Nokia N9 phones can only use a wireless connection.
4
The keys on the headset use Control Talk® technology.
Get started
Keys and parts
1Fast-forward key
2Multifunction key
3Rewind key
4NFC area
5Battery indicator light
6Charger connector
7Microphone
8Cable connector (3.5 mm)
9Volume keys
10 Bluetooth key
Charge the battery
Before using the headset, you must charge the battery.
When you unplug a charger, hold and pull the plug, not the cord.
1 When your headset needs recharging do the following:
5
2 When the battery is full and the yellow indicator light turns green, do the following:
Tip: You can also charge the headset from your computer with a compatible USB
cable.
With a wireless connection, the fully charged battery has power for up to 24 hours of
talk time or 24 hours music playing time, or up to 7 days of standby time.
When the battery charge is low, you hear a periodic voice prompt or beep, and the
yellow indicator light flashes.
6
When the battery is empty, you can still use a wired connection without active noise
cancellation (ANC).
Tip: The battery indicator light tells you the level of battery charge whenever you
switch the headset on or off. A green light means there is enough power. If the light
is yellow, you may need to recharge the battery soon. If the light is red, recharge the
battery.
Switch the headset on
There's no power button to press – just unfold the headset, and it automatically
switches on.
The headset beeps, and the battery indicator light flashes once, showing you the
battery charge. The headset automatically connects to the last connected device. If
you've never paired the headset with a device, or you've cleared the pairings, the
headset goes into pairing mode.
Switch the headset off
Fold the headset. The headset beeps, and the battery indicator light flashes once. All
connections close.
If the headset is not connected to a device within 10 minutes, it switches to standby
mode. To wake the headset up, switch it off, and switch it back on again.
7
Wear the headset
Adjust the headband for a perfect fit.
Put the earpiece marked with L over your left ear and the one marked with R over
your right ear.
When you put the headset on, the earpiece proximity sensors switch active noise
cancellation (ANC) on automatically.
If you're not wearing the headset for 10 minutes, ANC switches off, and the headset
mutes itself to save power. To carry on using the headset, just put it back on your
head.
Pair and connect to a device
About pairing and connecting wirelessly
Before using your headset, you must pair and connect it to a compatible device.
You can pair the headset with 8 devices.
Tip: You can even connect to 2 devices, such as your computer and your phone, at
the same time. You first need to switch the multipoint feature on.
8
With some devices, you may need to make the connection separately after pairing.
When you switch your headset on, it automatically connects to the device it was used
with last. If the last connected device can't be found, the headset connects to the
next device on its paired devices list.
When the headset is connected to a device, the Bluetooth indicator light flashes
slowly.
Tip: Can't connect the headset to a compatible device? Make sure the headset is
charged, switched on, and paired with the device.
Pair and connect with NFC
With Near Field Communication (NFC), you can pair and connect your headset to your
compatible device easily.
1 If your device supports NFC, switch NFC on.
2 Switch the headset on.
3 Touch the NFC area on the headset with the NFC area on your device. The headset
connects to the device automatically.
You can also disconnect the headset using NFC. For details on NFC, see your device
user guide.
If the device does not support NFC, pair the headset manually.
Pair and connect with Bluetooth
1Make sure the headset is switched off.
9
2 Switch the compatible device on, and switch Bluetooth on.
3 Switch the headset on. If you've previously paired your headset with another
device, press and hold for 2 seconds. The blue indicator light starts to flash
quickly.
4 Set your device to search for Bluetooth devices. For details, see your device user
guide.
5 On your device, select the headset from the list of found devices.
6 If needed, type in the passcode 0000.
Connect to two devices at the same time
Would you like to listen to music on your computer, but still be ready for calls? When
you've paired your headset and connected it to your phone, you can switch the
multipoint feature on and connect your headset also to another compatible device,
such as a computer.
1 Make sure Bluetooth is switched on in both devices.
2 Make sure the headset is switched on, and press and hold for 2 seconds.
3 Press and hold the volume up key and to switch the multipoint feature on.
4 Pair the headset with the second device.
5 Switch the headset off.
6 Switch the headset back on, and the headset connects to both devices.
To disconnect, repeat steps 1-3.
Connect with a cable
When you use the audio cable, the wireless connection switches off, so you can use
your headset offline, for example, during a flight.
10
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Nokia Cuffia
Nokia
Nokia BH-304 Manuale utente
Nokia
Nokia BH-111 Manuale utente
Nokia
Nokia WH-208 Manuale del proprietario
Nokia
Nokia BH-609 Manuale utente
Nokia
Nokia 9232254 Manuale utente
Nokia
Nokia HS-16 Manuale utente
Nokia
Nokia BH 300 - Headset - Over-the-ear Manuale utente
Nokia
Nokia BH 104 - Headset - Over-the-ear Manuale utente
Nokia
Nokia 02704X5 Manuale utente
Nokia
Nokia HDW 2 Manuale utente
Nokia
Nokia LCH-6 Manuale utente
Nokia
Nokia BH-106 Black Manuale utente
Nokia
Nokia HS-76W Manuale utente
Nokia
Nokia hs-13w - Wireless Image Headset Manuale utente
Nokia
Nokia BH 300 - Headset - Over-the-ear Manuale utente
Nokia
Nokia LPS-4 Manuale utente
Nokia
Nokia WH 600 - Headset - Binaural Manuale utente
Nokia
Nokia HS-16 Manuale utente
Nokia
Nokia BH-806 Manuale utente
Nokia
Nokia BH 103 - Headset - In-ear ear-bud Manuale utente
