Nokia Essence BH-610 Manuale utente
Nokia Bluetooth Stereo Headset
BH-610
1111111/1
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
Introduction
About your headset
With the Nokia Bluetooth Headset
BH-610, you can handle calls
hands-free and listen to music on
the go. Active noise cancellation
(ANC) helps you enjoy high audio
quality also in noisy
environments. The headset iseasy
to pair with compatible devices.
The surface of this product is nickel-
free.
Warning: This product may
contain small parts. Keep them out
of the reach of small children.
Parts of the product are magnetic.
Metallic materials may be attracted
to the product. Do not place credit
cards or other magnetic storage
media near the product, because
information stored on them may be
erased.
Read this user guide carefully before
using the product. Also, read the user
guide for the device that you connect
to the product.
For support, go to
www.nokia.com/support.
About Bluetooth
connectivity
You can use Bluetooth to make a
wireless connection to other
compatible devices, such as
mobile devices.
Devices do not need to be in direct
line-of-sight, but they must be
within 10 metres (33 feet) of each
other. The connection may be
affected by obstructions such as
walls or other electronic devices.
This device is compliant with
Bluetooth Specification 2.1 + EDR
supporting the following profiles:
ENGLISH
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
Headset Profile (HSP) 1.2, Hands-Free
Profile (HFP) 1.5, Advanced Audio
Distribution Profile (A2DP) 1.2, and
Audio Video Remote Control Profile
(AVRCP) 1.0. Check with the
manufacturers of other devices to
determine their compatibility with
this device.
Get started
Keys and parts
1Charger connector
2Indicator light
3Volume keys
4Clip
5Rewind key
6Play/Pause key
7Fast-forward key
8Treble key
9Bass key
10 Multifunction key
11 Active noise cancellation (ANC)
switch
12 Neck strap
13 Microphone
14 Earpiece
15 Near Field Communication
(NFC) area
Charge the battery
Before using the headset, you
must charge the battery.
When you unplug a charger, hold
and pull the plug, not the cord.
1. Connect the charger to a wall
outlet.
2. Connect the charger cable to
the charger connector on the
headset. The red indicator light
ENGLISH
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
turns green when the battery is
fully charged.
3. Disconnect the charger from
the headset, then from the wall
outlet.
The fully charged battery has
power for up to 8 hours of talk
time or music playing time, or up
to 35 hours of standby time with
active noise cancellation (ANC)
activated. To increase standby
time, deactivate ANC if you are not
using the headset. When ANC is
not activated, the standby time is
up to 240 hours.
After 15 minutes of charging, the
battery has power for over 4 hours
and 30 minutes of talk or music
playing time.
When the battery charge is low,
the headset beeps every 5
minutes and the red indicator
light flashes.
If you activate ANC without
switching the headset on, when
the battery charge is low, the
headset doesn't beep and the red
indicator light stays on.
Check the battery charge —
With your headset connected to
your mobile device, press . A
green light indicates a sufficient
charge level. If the light is yellow,
you may need to recharge the
battery soon. If the light is red,
recharge the battery.
Switch the headset on or off
To switch the headset on, press
and hold for 2 seconds. The
headset beeps, and a green
indicator light flashes once. The
headset automatically connects
to the last connected device. If you
have never paired the headset
with a device, or you have cleared
ENGLISH
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
the paired devices list, pairing
mode is automatically activated.
To switch the headset off, press
and hold for 4 seconds. The
headset beeps, and a red indicator
light flashes once.
If the headset is not connected to
a device within 30 minutes, it
switches off.
Wear the headset
You can attach the headset to your
clothing using the clip, or carry it
on your neck using the neck strap.
To attach the neck strap, slide the
earpiece cable into the neck strap
clip, and twist the cable 90
degrees to lock it into place.
The headset is provided with
different-sized rubber earpieces.
Select the ones that fit you best.
Make sure you insert the earpiece
marked with Linto your left ear
and the one marked with Rinto
your right ear.
Use active noise
cancellation (ANC)
Active noise cancellation (ANC)
reduces background noise, so you
can enjoy high audio quality also
in noisy environments. As you can
listen at a lower volume, ANC
helps protect your hearing.
Use the ANC switch to activate or
deactivate ANC.
You can activate ANC even when
your headset is switched off, and
use your headset as ear plugs to
reduce background noise, for
example, when on a plane.
Tip: To save battery
power, make sure ANC is
not activated when you
are not using the headset.
ENGLISH
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
Make calls
Make and receive calls
Make a call — When the headset
is connected to your compatible
mobile device, make a call
normally using your mobile
device.
Answer or end a call — Press
.
Mute or unmute the
microphone — Press .
Reject a call — Press twice.
You can redial the number you last
called or use your voice to make a
call, if your mobile device
supports these features with the
headset.
Redial the last called
number — When no call is in
progress, press twice.
Activate voice dialling — When
no call is in progress, press and
hold for 2 seconds, and
follow the instructions in the user
guide of your mobile device.
Change the volume
Use the volume keys. To change
the volume quickly, press and hold
the volume keys.
To avoid increasing the volume in
noisy environments, use active
noise cancellation (ANC).
ENGLISH
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
Pair the device
Pair and connect the
headset
Before using the headset with a
compatible device for the first
time, you must pair and connect
them.
Pair the headset manually
1. Make sure the headset is
switched off.
2. Switch the compatible device
on, and activate the Bluetooth
feature on the device.
3. Switch the headset on. If you
have previously paired your
headset with another device,
press for 5 seconds. The
blue indicator light starts to
flash quickly.
4. Set your device to search for
Bluetooth devices. For details,
see the user guide of the
device.
5. On your device, select the
headset from the list of found
devices.
6. If required, enter the passcode
0000.
In some devices, you may need to
make the connection separately
after pairing.
Pair and connect the
headset using NFC
With Near Field Communication
(NFC), you can pair and connect
your headset to your compatible
device easily. If the compatible
device supports NFC, activate its
NFC feature, and touch the NFC
area on the headset with the NFC
area on your device. The headset
ENGLISH
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
switches on and connects to the
device automatically. You can also
disconnect the headset using NFC.
For details on NFC, see the user
guide of the device.
If the device does not support NFC,
pair the headset manually.
Connect the headset to
your device
When you switch your headset on,
it automatically connects to the
last device it was used with. If the
last connected device is not
available, the headset tries to
connect to the next device on its
paired devices list.
If your mobile device does not
support the A2DP profile for
listening to music, you can
separately pair the headset with a
music player that supports this
profile. If you have paired and
connected the headset to your
mobile device, disconnect the
headset from it before pairing the
headset with the music player.
The paired devices list on your
headset can contain up to 8
devices. You can connect the
headset to 2 compatible devices
at the same time: 1 mobile device
and 1 music player.
Connect the headset to the last
used device manually — If no
other device is connected, press
and hold for 2 seconds. The
headset beeps once.
ENGLISH
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
Listen to music
Play music
The headset must be paired and
connected to a mobile device that
supports the A2DP Bluetooth
profile and has a music player
feature, or to a compatible music
player that supports this profile.
Warning: Continuous
exposure to high volume may
damage your hearing. Listen to
music at a moderate level.
Play a song — Select the song in
the music player, and press .
Pause or resume playing —
Press .
If you receive or make a call while
listening to music, the music is
paused.
Play the next song — Press .
Play the previous song — Press
twice.
Start the current song from the
beginning — Press .
Scroll through the current song
quickly — Press and hold or
.
Stop playing — Press and hold
.
Adjust the bass or treble
When you are listening to music,
you can change the tone,
adjusting the treble or bass.
Emphasise the low frequency
sounds — Press the bass key.
Emphasise the high frequency
sounds — Press the treble key.
Emphasise all sounds
(loudness) — Press the bass and
treble keys
ENGLISH
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
Altri manuali per Essence BH-610
1
Indice
Altri manuali Nokia Cuffia
Nokia
Nokia BH 212 - Headset - Over-the-ear Manuale utente
Nokia
Nokia BH 300 - Headset - Over-the-ear Manuale utente
Nokia
Nokia BH-101 Manuale utente
Nokia
Nokia BH 301 - Headset - Over-the-ear Manuale utente
Nokia
Nokia BH-501 Manuale utente
Nokia
Nokia BH-203 Manuale utente
Nokia
Nokia Essence BH-610 Manuale utente
Nokia
Nokia WH-208 Manuale del proprietario
Nokia
Nokia HS-16 Manuale utente
Nokia
Nokia BH-221 Manuale utente
Nokia
Nokia BH-207 Manuale utente
Nokia
Nokia BH-217 Manuale utente
Nokia
Nokia 9232254 Manuale utente
Nokia
Nokia BH-200 Manuale utente
Nokia
Nokia BH-500 Manuale utente
Nokia
Nokia BH-207 Manuale utente
Nokia
Nokia HS 36W Manuale utente
Nokia
Nokia HS 26W - Headset - Over-the-ear Manuale utente
Nokia
Nokia BH 301 - Headset - Over-the-ear Manuale utente
Nokia
Nokia N-GAGE Manuale utente
