NOLO CV1 PRO Manuale utente
Positioning Base Station *1
Interactive Controller *2
Headset Marker *1
电源适配器 X1
一字型定位器卡座 X1
L型定位器卡座 X1
Power Adapter *1
Slotted Positioner Socket*1
L-type Positioner Socket*1
一分三充电线 X1
OTG 数据线 X2
1米数据线 X1
一字型定位器卡座 X1
Three-In-One Charging Cable *1
OTG Data Cable*2
1 m Data Cable*1
Slotted Positioner Socket*1
了解设备
Learn More about the Device
交互手柄
1扳机键
2配对键
3侧按键
4触控板
5菜单键
6指示灯
7系统/电源键
Interactive Controller
1 Trigger Key
2 Pairing Key
3 Side Keys (Each for the left and right sides)
4 Touch Key
5 Menu Key
6 Indicator Lamp
7 System/ Power Key
定位基站
电源键
配对键
Positioning Base Station
Power Key
Pairing Key
头盔定位器
指示灯
USB 接口
配对键
Headset Marker
Indicator Lamp
USB Interface
Pairing Key
一.配合 VR—体机使用说明
I. Instructions for Standalone Headsets
1.搭建网络环境
1. Set up the network environment
将路由器和电脑通过网线连接；
将VR—体机和电脑连接至同一路由器的 5G Wi-Fi 频段。
Connect the router and the computer with the network cable;
Connect the standalone headsets and computer to the 5G Wi-Fi band of the same router.
2.电脑软件准备
2. Software Preparation of PCs
电脑下裁并安装 NOLO HOME Windows 版(http://download.nolovr.com )。
Download and install the Windows version of NOLO HOME (http://download.nolovr.com).
3.VR_体机端软件准备
使用 VR+体机中的应用市场下裁并安装 NOLO HOME。
3. Software Preparation of the Standalone Headsets
Download and install the NOLO HOME through the application market of the standalone
headsets.
4.运行 VR—体机中的 NOLO HOME
使用 VR—体机的手柄操作，打开 NOLO HOME。
4. Run the NOLO HOME of the Standalone Headsets
Run the NOLO HOME by the controllers of the standalone headsets.
5.开启 NOLO 设备
将基站放置在与肩同高的水平桌面边缘，并保持基站正面朝 外正对使用者，然后开启基站
和手柄的电源开关。
5. Turn on the NOLO Device
Place the base station on the shoulder-height table edge with the front side facing the user, and
then turn on the power switches of the base station and controllers.
6. 连接头盔定位器
把NOLO 附带的头盔定位器底座粘贴在 VR+体机上(注意不要遮挡电源键然后将头盔定位器
插入底座；
使用 OTG 线连接头盔定位器和 VR+体机。
6. Connect the Headset Marker
Stick the base of the attached headset marker of NOLO to the standalone headsets (Be careful not
to cover the power key) and then insert the headset marker into the base;
Connect the headset marker and the standalone headsets through the OTG cable.
7. 建立 PC 连接
开启电脑上和 VR—体机内的 NOLO HOME,呆持 VR—体机中 的 NOLO HOME 为等待连接
状态，待电脑自动扫描到一体机后，点击连接按纽。
7. Connect the PC
Run the NOLO HOME software of the computer and standalone headsets, and keep the NOLO
HOME of the standalone headsets running, and then click the button of Connect after the
standalone headsets is searched by the computer.
8. 开始游戏
正确佩戴 VR—体机进行标定后，手持 NOLO 手柄，正对基站，开始享受精彩极致的游戏体
验吧！
注:标定方法请参考-四.NOLO 使用说明
8. Start Game
After correctly wearing the standalone headsets to calibrate, take the NOLO controllers, face the
base station and start to enjoy the ultimate gaming experience.
Notes: Please refer to IV. Instructions for the calibration method.
二.配合 PC 头显使用说明
II. Instructions for the PC Head-Mounted Display
Device
1.连接 PC 头显
使用 PC 头显专用数据线连接 PC 头显。
1. Connect the PC head-mounted display device
Connect the PC head-mounted display device with the special data cable.
2.电脑软件准备
使用电脑下裁并安装 NOLO HOME Windows 版(http://download.nolovr.com )。
2. Software Preparation of PC
Download and install the Windows version of NOLO HOME (http://download.nolovr.com).
3.连接头盔定位器
把NOLO 附带的头盔定位器底座粘贴在 PC 头显上，然后将头盔定位器插入底座；
使用 OTG 线连接头盔定位器和 PC 头显。
3. Connect the Headset Marker
Stick the base of the attached headset marker of NOLO to the PC head-mounted display device
and then insert the headset marker into the base;
Connect the headset marker and the PC head-mounted display device through the OTG cable.
4.开启 NOLO 设备
将基站放置在与肩同高的水平桌面边缘，并保持基站正面朝 外正对使用者，然后开启基站
和手柄的电源开关。
4. Turn on the NOLO Device
Place the base station on the shoulder-height table edge with the front side facing the user, and
then turn on the power switches of the base station and controllers.
5.建立 PC 连接
开启电脑上的 NOLO HOME,寺自动扫描到 PC 头显后,点击连接按纽。
5. Connect the PC
Run the NOLO HOME software of the computer and then click the button of Connect after the PC
head-mounted display device is searched.
6.开始游戏
正确佩戴 PC 头显进彳 Tfe 定后，手持 NOL◦手柄，正对基站，开始享受精彩极致的游戏体
验吧！
注:标定方法请参考-四.NOLO 使用说明
6. Start Game
After correctly wearing the PC head-mounted display device to calibrate, take the NOLO
controllers, face the base station and start to enjoy the ultimate gaming experience.
Notes: Please refer to IV. Instructions for the calibration method.
三.配合安卓手机使用说明
III. Instructions for Android Mobile Phone
注:需同时搭配 VR 眼镜使用。
Note: The VR glasses are needed.
1.搭建网络环境
将路由器和电脑通过网线连接；
将手机和电脑连接至同一路由器的 5G Wi-Fi 频段。
1. Set up the network environment
Connect the router and the computer with the network cable;
Connect the mobile phone and computer to the 5G Wi-Fi band of the same router.
2.电脑软件准备
2. Software Preparation of PC
使用电脑下裁并安装 NOLO HOME Windows 版(http://download.nolovr.com )。
Download and install the Windows version of NOLO HOME (http://download.nolovr.com).
3.手机端软件准备
使用手机中的应用市场下裁并安装 NOLO HOME 手机版； 运行手机中的 NOLO HOME。
3. Software Preparation of the Standalone Headsets
Download and install the NOLO HOME through the application market of the mobile phone; Run
the NOLO HOME on the mobile phone.
4.连接头盔定位器
使用 OTG 短线连接手机和头盔定位器，并允许手机上的 USB 权限弹窗。
4. Connect the Headset Marker
Connect the headset marker and the mobile phone with the OTG cable and allow the USB
pop-ups.
5.安装手机到 VR 眼镜上
把NOLO 附带的头盔定位器底座粘贴在 VR 眼镜上，然后将头盔定位器插入底座；
将手机放入 VR 眼镜中并固定。
5. Install the mobile phone into the Headset Marker
Indice
