Nomadix AG2500 Manuale utente

GATEWAY QUICK START GUIDE

May 2019 Information subject to change without notice. 1

About this Guide

This Quick Start Guide provides instructions and reference material for getting started with the Nomadix Access Gateway

Products, specifically the AG 2500, AG 5900 and EG 6000.

Documentation and Technical Support

For more detailed information about the individual gateways and all other Nomadix Product Documentation, User Guide,

XML DTD, MIB and Radius Dictionary can be found using the following URL:

http://www.nomadix.com/technical-support-documentation

If you have any problems, please contact our technical support team at +1.818.575.2590, or via email: suppor[email protected]

Accessory Box Contents

The AG 2500, AG 5900 and EG 6000 are shipped with the following Accessory Box to assist with product installation.

Contents varies depending on what was ordered.

Accessory Box

Qty Description Comments

power cords

1 1.8m U.S. (NEMA 5-15p) Power Cord (Type B): United

States, Canada, Mexico and Japan.

Included with product shipped in North

America and Mexico.

(part no. 715-4001-004)

1 1.8m EU Schuko CEE7/7 Power Cable (Type F): Most

everywhere in Europe and Russia except for UK and

Ireland.

Optional item: (part no. 715-4001-003)

1 1.8m U.K. Power Cord (BS1363 Type G): used in the

United Kingdom, Ireland, Malaysia, Singapore and Hong

Kong.

Optional item: (part no. 715-4001-005)

1 1.8m China Standard (Type I) 3 Prong GB 2099 Power

Cord, used in China, Australia , New Zealand, Argentina.

Optional item: (part no. 715-4001-006)

1 1.8m India (Type D), 3 Prong Power Cord, used mainly in

India.

Optional item: (part no. 715-4001-007)

console

cables

1 1.8m RJ45 – DB9S Console Cable (Black) AG 2500 and AG 5900 only

1 1.8m EG 6000 USB to DB9 Console Cable AG 6000 only:

Optional Item: 715-4001-001

adaptors

1 RJ45 – DB9 Adaptor (Grey)

PMS connection

AG 2500 and AG 5900 only

1 RJ45 -DB9S PMS Adaptor (part number 715-4001-002)

and Optical Isolator 715-4001-009)

EG 6000 only. Not sold separately.

Included with EG 6000 Hospitality PMS

Software Module (716-6017-001)

misc.

items

1 19” Rack Mount Brackets Kit

and screws. All Products

1 Power Transformer and mounting bracket AG 2500 only

1 Bumper Kit for desktop installations. All Products

1 Rack Mount Bracket are different for the AG 2500 and AG 5900/EG 6000

GATEWAY QUICK START GUIDE

Nomadix Inc. 2

Installation and Cabling

1. Unpack the Nomadix Access Gateway and place the product on a flat and stable work surface.

2. Register the gateway for support services by completing and returning the Nomadix Gateway Registration Form - hardcopy

enclosed or obtain the form online at the following URL: http://www.nomadix.com/registration.html

3. Install the Rack Mount brackets to the Nomadix Access Gateway and install in the 19” rack.

AG 5900/EG 6000 (Example)

Step #1 Install the Rack Mounting Flanges to each side of the AG 2500 or AG 5900/EG 6000: using

the 6-32 flat head screws.

Step #2 Using (4) 10-32 rack mounting screws, position the AG in the rack and secure to the vertical

rails.

4. Connect the power cord.

5. For the initial configuration connect to the AG 2500, AG 5900 or EG 6000, either a serial asynchronous connection or

Ethernet connection described below:

Initializing the Gateway

There are (2) methods to initialize/start-up the Gateway, most common is via the WAN Ethernet port or alternatively by using the

asynchronous RJ45 port on the AG 2500 or AG 5900, or the USB the console port on the EG 6000, both configurations are

depicted below:

Ethernet Port Connection

Configure the laptop’s network setting to use the following Administration IP address settings [Table 1].

IP Address Netmask Gateway DNS (if needed)

172.30.30.173 255.255.0.0 172.30.30.172 4.2.2.1

Table 1: Administrative IP address

GATEWAY QUICK START GUIDE

May 2019 Information subject to change without notice. 3

Install the Ethernet cable between the AG 2500, AG5900 or the EG 6000 Eth1 port and the laptop’s Ethernet port and check

the status as shown [illustration 1].

Illustration 1: Ethernet connection and status

Asynchronous Console Port Connection

On the PC/laptop start the asynchronous terminal emulation application, using PuTTY, Hyperterm, Procomm (or equivalent)

application using the following configuration parameters for the comm port [Table 2].

Bits Per Second Data Bits Parity Stop Bits Flow Control

9600 8 NONE 1 NONE

Table 2: Comm port settings.

On the AG 2500 and AG5900 use the RJ45 console port, on the EG 6000 use the USB console port. Please note: the EG 6000

console port is only on the USB port. Both methods are depicted below [illustration 2]:

Illustration 2: Console Port connections

With everything connected and powered up, you are now ready to configure the configure the Gateway’s WAN for a static IP

address, DHCP Client or PPPoE client using appropriate configuration guidelines that follow in order to obtain the license key.

Once the key has been obtained, the web management interface (WMI) can be used to continue and finish the configuration.

GATEWAY QUICK START GUIDE

Nomadix Inc. 4

Note: The WAN port of the Gateway must be connected to a live network that can access the Internet in order to retrieve the

license key from the license key server.

Initial (startup) Configuration

Log in to the Gateway, by opening an SSH to 172.30.30.172 or the asynchronous comm port, using the default Login= admin and

password= admin. Type y[es] when prompted to configure settings.

The initial minimal WAN port configuration mode will be displayed as shown in Figure 1.

Figure 1: Initial minimal WAN port configuration.

Select the desired configuration mode and use the following steps to configure the WAN port for either Static IP, DHCP client or

PPPoE.

GATEWAY QUICK START GUIDE

May 2019 Information subject to change without notice. 5

Step 1a: Static WAN IP Configuration

Accept static as the default configuration mode and enter the following mandatory settings shown in Figure 2.

Figure 2: Initial WAN port settings

A WAN port summary page will then be displayed as shown in Figure 3.

Figure 3: WAN port static IP configuration summary page

GATEWAY QUICK START GUIDE

Nomadix Inc. 6

If everything is correct in the summary, type b[ack] to return to the previous menu and proceed to Step 2 to enter the location

information.

Otherwise, select an option from the Ethernet port configuration menu to display or make changes to the WAN port settings.

When finished with the settings, type b[ack] to return to the previous menu and proceed to Step 2 to enter the location

information.

Step 1b: DHCP Client Configuration

Type d[hcp] for the configuration mode as shown in Figure 4.

Figure 4: Selecting DHCP Client for WAN configuration

A WAN port summary page will then be displayed as shown in the example Figure 5.

Figure 5: WAN port DHCP client configuration summary page

If everything is correct in the summary, type b[ack] to return to the previous menu and proceed to Step 2 to enter the location

information.

Otherwise, select an option from the Ethernet port configuration menu to display or make changes to the WAN port settings.

When finished with the settings, type b[ack] to return to the previous menu and proceed to Step 2 to enter the location

information.

GATEWAY QUICK START GUIDE

May 2019 Information subject to change without notice. 7

Step 1c: PPPoE Dynamic IP Client Configuration

Enter p[ppoe] when prompted. Enter the following mandatory settings for a PPPoE connection with dynamic PPP IP

configuration shown in Figure 6.

Figure 6: Selecting PPPoE with dynamic IP configuration

A WAN port summary page will then be displayed as shown in Figure 7.

Figure 7: WAN port PPPoE client configuration summary page

GATEWAY QUICK START GUIDE

Nomadix Inc. 8

Step 1d: PPPoE Static IP Client Configuration

Use the same steps for configuring dynamic PPPoE shown in Figure 6 above, but select static for PPP IP Configuration Mode, and

enter your IP address for PPP Static IP Address. A summary page similar to Figure 7 above will be displayed.

If everything is correct in the summary, type b[ack] to return to the previous menu and proceed to Step 2 to enter the location

information.

Otherwise, select an option from the Ethernet port configuration menu to display or make changes to the WAN port settings. When

finished with the settings, type b[ack] to return to the previous menu and proceed to Step 2 to enter the location information.

Step 2: Entering Your Location Information

You will be required to enter location information to obtain the license key. Enter the following mandatory location information

details shown in Figure 8.

Figure 8: Site location details

Step 3: Retrieving Your License Key

The system will now prompt you to accept or decline the End User License Agreement (EULA). You must accept the terms of the

EULA before the AG can retrieve its license key. To retrieve the license key, enter y[es] as shown in Figure 9. The AG retrieves

the license key from the Nomadix license key server, then reboots.

GATEWAY QUICK START GUIDE

May 2019 Information subject to change without notice. 9

Figure 9: License key retrieval.

NOTE: The date and time the gateway receives a valid license from our server for the first time is considered the Software License

Subscription start date.

Step 4: Configuring the System

established a basic configuration for the AG that enables internet connectivity.

For additional information about the available AG features, refer to Chapter 2 of the User Guide specific to your AG. For

example:

 To establish various billing and authentication methods, see Defining the AAA Services.

 To establish hotel billing, see Assigning a PMS Service.

Step 5: Configuring AG DHCP Server Settings

DHCP Server is enabled by default. To configure the DHCP Server, go to DHCP under the Configuration menu. You can either

modify the default DHCP pool or delete/add another DHCP pool. The total lease pool size recommendation is 75% more than the

number of licensed subscribers. Table 3 shows the factory default DHCP server settings.

DHCP Parameters Your Settings Default Values

DHCP Services (Disable) no

DHCP Relay (Yes / No)

If No, skip to DHCP Server

DHCP Relay Server IP Address blank

DHCP Relay Agent IP Address blank

DHCP Server (Yes / No)

Only if the DHCP Relay is disabled

yes

GATEWAY QUICK START GUIDE

Nomadix Inc. 10

DHCP Server IP Address 10.0.0.4

DHCP Server Subnet Mask 255.255.255.0

DHCP Pool Start IP Address 10.0.0.12

DHCP Pool End IP Address 10.0.0.72

DHCP Lease Minutes 1440

Table 3: DHCP server configuration

Sample Network Setup

An example of a basic network including an AG is shown in Figure 10.

Figure 10: Example of a network setup

Additional Documentation

Additional Product documentation can be found at:

http://www.nomadix.com/technical-support-documentation

Nomadix Product Documentation

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Nomadix Portale

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

HMS

HMS Netbiter EasyConnect EC150 Manuale utente

Huawei

Huawei EchoLife HG620 Manuale utente

AT&T

AT&T U-verse 3801 Manuale per l'uso e la cura

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente