Nordmann Engineering SPA Display Manuale utente

INSTALLATION AND OPERATION MANUAL

Nordmann SPA Display

2591871-A EN 1903

Thank you for choosing Nordmann

Installation date (MM/DD/YYYY):

Commissioning date (MM/DD/YYYY):

Site:

Model:

Serial number:

Proprietary Notice

This document and the information disclosed herein are proprietary data of Nordmann Engineering AG. Neither

this document, nor the information contained herein shall be reproduced, used, or disclosed to others without the

written authorisation of Nordmann Engineering AG, except to the extent required for installation or maintenance

of recipient's equipment.

Liability Notice

Nordmann Engineering AG does not accept any liability due to incorrect installation or operation of the equipment

or due to the use of parts/components/equipment that are not authorised by Nordmann Engineering AG.

Technical modications reserved.

Contents

1 Introduction 4

1.1 To the very beginning 4

1.2 Notes on the installation and operation manual 4

2 For your safety 6

3 Product Overview 8

4 Installation 9

4.1 Unpacking and checking the scope of delivery 9

4.2 Storing the unit 9

4.3 Notes on positioning the Nordmann SPA Displays 10

4.4 Mounting the Nordmann SPA Display 10

4.4.1 In-wall mounting 11

4.4.2 On-wall mounting 17

4.5 Connecting the Nordmann SPA Display to the Nordmann Omega or to the

Condair Delta SPA Control Box 23

5 CongurationandoperationoftheNordmannSPADisplay 27

5.1 CongurationoftheNordmannSPA Display 27

5.2 Operation of the Nordmann SPA Display 27

6 Troubleshooting 28

6.1 Fault indications / warning and fault list 28

6.2 Malfunctions during operation of the Nordmann SPA Display 28

7 Takingoutofservice/Disposal 29

7.1 Taking out of service 29

7.2 Disposal/Recycling 29

8 Technicaldata 30

9 Spareparts 31

1.1 Totheverybeginning

We thank you for having purchased the Nordmann SPA Display with touch-sensitive display.

The Nordmann SPA Display incorporates the latest technical advances and meets all recognized safety

standards. Nevertheless, improper use of the Nordmann SPA Display may result in danger to the user

or third parties and/or impairment of material assets.

To ensure a safe, proper, and economical operation of the Nordmann SPA Display, please observe and

comply with all information and safety instructions contained in the present installation and operation

manual.

If you have questions after reading this manual, please contact your Nordmann representative. They

will be glad to assist you.

1.2 Notesontheinstallationandoperationmanual

Limitation

The subject of this installation and operation manual is the external Nordmann SPA Display.

This installation and operation manual is restricted to the installation, commissioning, operation,

and trouble shooting of the Nordmann SPA Display and is meant for well trained personnel being

sufciently qualied for their respective work.

This installation and operation manual is supplemented by the installation manual and the operation

manual for the steam generator Nordmann Omega or the Condair Delta SPA Control Box, respectively.

Where necessary, appropriate cross-references are made to this publication in this installation and

operation manual.

Symbols used in this manual

CAUTION!

The catchword "CAUTION" designates notes in this installation and operation manual that, if neglected,

may cause damage and/or malfunction of the unit or other material assets.

WARNING!

The catchword "WARNING" used in conjunction with the general caution symbol designates safety

and danger notes in this installation and operation manual that, if neglected, may cause to injury to

persons.

DANGER!

The catchword "DANGER" used in conjunction with the general caution symbol designates safety and

danger notes in this installation and operation manual that, if neglected, may lead to severe injury

or even death of persons.

1 Introduction

Safekeeping

Please safeguard this installation and operation manual in a safe place, where it can be immediately

accessed. If the Nordmann Omega or the Condair Delta SPA Control Box with which the Nordmann SPA

Display is used changes hands, the documentation should be passed on to the new operator.

If the documentation gets mislaid, please contact your Nordmann representative.

Language versions

This installation and operation manual is available in various languages. Please contact your Nordmann

representative for information.

General

Every person working with the Nordmann SPA Display must have read and understood the present

installation and operation manual before carrying out any work.

Knowing and understanding the contents of the Installation and operation manual is a basic requirement

for protecting the personnel against any kind of danger, to prevent faulty operation, and to operate the

unit safely and correctly.

All ideograms, signs and markings applied to the Nordmann SPA Display must be observed and kept

in readable state.

Qualication of personnel

All actions described in the present Installation and operation manual (installation, operation, etc.) must

be carried out only by well trained and sufciently qualied personnel authorised by the owner.

For safety and warranty reasons any action beyond the scope of this manuals must be carried out only

by qualied technical personnel authorised by your Nordmann representative.

It is assumed that all persons working with the Nordmann SPA Display are familiar and comply with the

appropriate regulations on work safety and the prevention of accidents.

This unit may not be used by persons (including children) with reduced physical, sensory or mental

abilities or persons with lacking experience and/or knowledge, unless they are supervised by a person

responsible for their safety or they received instructions on how to operate the unit.

Children must be supervised to make sure that they do not play with unit.

Intended use

The Nordmann SPA Display is intended exclusively for the control of the steam generator Nord-

mann Omega and the Condair Delta SPA Control Box within the specied operating conditions

(see chapter8). Any other type of application without the express written consent of the manufacturer is

considered as not conforming with the intended purpose and may lead to the system becoming dangerous.

Operation of the equipment in the intended manner requires that all the information in these instruc-

tions are observed (in particular the safety instructions).

2 For your safety

Behavior in case of danger

If it is suspected that safe operation is no longer possible, then the Nordmann Omega or the Condair

Delta SPA Control Box, respectively should immediately be set out of operation, disconnected from

the mains and secured against accidental power-up (see Nordmann Omega or Condair Delta SPA

Control Box operation manual). This can be the case under the following circumstances:

– if the Nordmann SPA Display is damaged

– if the Nordmann SPA Display is no longer operating correctly

– if the connecting cable is damaged

All persons working with the Nordmann SPA Display must report any alterations to the unit that may

affect safety to the owner without delay.

Prohibited modications to the unit

No modications must be undertaken on the Nordmann SPA Display without the express written

consent of the manufacturer.

For the replacement of defective components use exclusively original accessories and spare parts

available from your Nordmann representative.

Nordmann SPA Display

in-wall mounted

Nordmann SPA Display

on-wall mounted

Fig. 1: Front view Fig. 2: Front view

Fig. 3: Back view Fig. 4: Back view

3 Product Overview

1 Touch-sensitive display

2a In-wall mounted housing

2b On-wall mounted housing

3 Connecting terminals (CAN BUS)

4 Decorative cover

5Magnets for the attachment of the decora-

tive cover

6 Magnetic centring frame with sealing

7 Cable entries

8 Shielding clamps

4 Installation

4.1 Unpackingandcheckingthescopeofdelivery

Unpacking the unit

Open the packing and check the delivery for completeness. Please contact your Nordmann represen-

tative in case something is lacking, they will be glad to send you the missing part without delay. The

standard delivery includes:

– Nordmann SPA Display in-wall mounted

– Nordmann SPA Display control PCB

– In-wall mounted housing with pre-mounted display mounting supports, fastening claws and

3 magnets

– Plastic bag containing mounting material

– Nordmann SPA Display on-wall mounted

– Nordmann SPA Display control PCB

– On-wall mounted housing

– Plastic bag containing mounting material

– Decoration cover with pre-mounted centring frame and sealing (if ordered)

Please check the equipment for damage. Please report any damage to your Nordmann representative

and to the carriers, as required.

Packaging

The original packaging of the Nordmann SPA Display was designed for optimum safety during transpor-

tation. Please preserve the original packing material in case you once have to return the unit for some

reason.

In case you wish to dispose of the packaging, observe the local regulations on waste disposal. Never

dispose of the packaging to the environment.

4.2 Storingtheunit

If the Nordmann SPA Display must be stored, store it in a protected area (best in the original packaging)

meeting the following requirements:

– room temperature: 1 ... 40 °C

– room humidity: 10 ... 80 %rh (non condensing)

4.3 NotesonpositioningtheNordmannSPADisplays

Please observe the following notes for the correct positioning of the Nordmann SPA Display(s):

– The Nordmann SPA Display(s) must not be installed in hazardous locations and in rooms where

water splashes may occur.

– Do not mount the Nordmann SPA Display(s) inside the steam bath cabin, sauna, bio sauna, etc..

– If possible mount the Nordmann SPA Display(s) at eye level.

– Do not mount the Nordmann SPA Display(s) in exposed places.

– Do not mount the Nordmann SPA Display(s) on vibrating components.

– Place the Nordmann SPA Display(s) in such a way, that the total length of 50 m of the CAN BUS

cables with which the Nordmann Omega or the Condair Delta SPA Control Box and the Nordmann

SPA Display(s) are interconnected is not exceeded.

4.4 MountingtheNordmannSPADisplay

CAUTION!

The electronic components of the Nordmann SPA Display are very sensitive to electrostatic discharge.

For all installation work on equipment appropriate measures must be taken to protect these components

against damage caused by electrostatic discharge (ESD protection).

Note: the Nordmann Omega or the Condair Delta SPA Control Box, respectively and the Nordmann SPA

Display(s) (up to a max. of 8 SPA Displays) are interconnected via a so-called CAN BUS. Use only a

shielded four-wire cable with a cross section of 0.34 mm2per wire to establish the CAN BUS con-

nections. The total length of the CAN BUS must not exceed 50 m.

Indice

Manuali Pannello di controllo popolari di altre marche

RDZ

RDZ PC-HRX Manuale utente

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manuale tecnico

Efka

Efka Variocontrol V810 Manuale utente

Cebora

Cebora 208-10 Manuale utente

AMX

AMX AutoPatch CP-15 Manuale utente

Satel

Satel CA-6 KLED-S Manuale utente

Evolution

Evolution IQ plus 800 Manuale utente

Fagor

Fagor 8040 TCO CNC Manuale utente

Trane

Trane ComfortLink II XL950 Control Manuale utente

AKO

AKO PROCool AKO-17635-2 Manuale utente

ABB

ABB 6136/30M-101 Manuale utente

Telikou

Telikou BK-603 Belt Pack Manuale utente

Mapei

Mapei Mapeheat Thermo Touch Manuale utente

Bosch

Bosch D9412GV4 Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manuale utente

Sminn

Sminn BOX L VF1L EI Manuale utente

Balboa

Balboa TP600 Manuale utente

Nice

Nice HSCU1 Specifiche tecniche