Nordson Select Coat Manuale utente

Select CoatrIn-Line Oven

Customer Product Manual

Part 108 183C

NORDSON CORPORATION DAMHERST, OHIO DUSA

1999 Nordson Corporation

108 183C

Issued 7/99

Manual 12-12

Nordson Corporation welcomes requests for information, comments and inquiries about its products. General

information about Nordson can be found on the Internet using the following address: http://www.nordson.com.

Address all correspondence to:

Nordson Corporation

Attn: Customer Service

555 Jackson Street

Amherst, OH 44001

Notice

This is a Nordson Corporation publication which is protected by copyright. Original copyright date 1991. No part of

this document may be photocopied, reproduced, or translated to another language without the prior written consent

of Nordson Corporation. The information contained in this publication is subject to change without notice.

Trademarks

Blue Box, Can Works, Century, CleanSleeve, CleanSpray, Control Coat, Cross-Cut, Easy Coat, Econo-Coat, Excel

2000, Flow Sentry, FoamMix, Horizon, Hot Shot, Isocoil, Isocore, Iso-Flo, MEG, Nordson, the Nordson logo,

Package of Values, PowderGrid, Pro-Flo, PRX, RBX, Ready Coat, Rhino, SCF, Select Coat, Select Cure, Shur-Lok,

Smart-Coat, System Sentry, Tribomatic, Versa-Coat, Versa-Screen, and Versa-Spray

are registered trademarks of Nordson Corporation.

Accu-Jet, Auto-Flo, CanNeck, Clean Coat, CPX, EasyClean, Ink-Dot, OptiMix, PowderGrid, Pulse-Spray, Sure

Coat, Swirlcoat and Walcom are trademarks of Nordson Corporation.

Table of Contents

E1999 Nordson Corporation

Issued 7/99 Manual 12-12

Table of Contents

1. Introduction 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2. Qualified Personnel 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3. Intended Use 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4. Regulations and Approvals 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5. Personal Safety 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

High-Pressure Fluids 1-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6. Fire Safety 1-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Halogenated Hydrocarbon Solvent Hazards 1-5. . . . . . . . . . . . . . . .

7. Action in the Event of a Malfunction 1-5. . . . . . . . . . . . . . . . . . . . . . . . . .

8. Disposal 1-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1. Introduction 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2. Oven Components and Controls 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lamps and Reflector 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3. Front Panel User Controls and Displays 2-2. . . . . . . . . . . . . . . . . . . . . .

Inside Panel User Control 2-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

AC Enclosure User Controls 2-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4. Theory of Operation 2-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1. Introduction 3-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2. Exhaust 3-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3. Power Cable 3-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4. Leveling/Alignment 3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Section 1

Safety

Section 2

Description

Section 3

Installation

Table of Contents

E1999 Nordson Corporation

108 183C

Issued 7/99

Manual 12-12

1. System Startup 4-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2. Initial Setup 4-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Conveyor Width Adjustment 4-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Conveyor Speed Adjustment 4-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Reciprocator Speed Adjustment 4-3. . . . . . . . . . . . . . . . . . . . . . . . . .

Focal Adjustment 4-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Stroke Adjustment 4-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Manual Focus Adjustment 4-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Power Focus Adjustment 4-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Power Focus Speed Adjustment 4-9. . . . . . . . . . . . . . . . . . . . . . . .

3. System Shutdown 4-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1. Daily 5-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2. Weekly 5-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3. Monthly 5-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Test Point Voltages 5-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4. Every Three Months 5-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5. Every Six Months 5-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1. Introduction 6-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2. Power Supply Fault Codes 6-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3. Troubleshooting Table 6-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4. Power Supply Connections and Test Points 6-9. . . . . . . . . . . . . . . . . . .

1. Blower/Irradiator Housing Removal/Replacement 7-1. . . . . . . . . . . . . .

Removal 7-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Replacement 7-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2. Ignitor Bulb Removal/Replacement 7-3. . . . . . . . . . . . . . . . . . . . . . . . . .

3. Air Pressure Switch Removal/Replacement 7-3. . . . . . . . . . . . . . . . . . .

4. Magnetron Removal/Replacement 7-4. . . . . . . . . . . . . . . . . . . . . . . . . . .

5. Photoresistor Removal/Replacement 7-4. . . . . . . . . . . . . . . . . . . . . . . .

6. Blower Air Filter Removal/Replacement 7-4. . . . . . . . . . . . . . . . . . . . . .

Section 4

Operation

Section 5

Maintenance

Section 6

Troubleshooting

Section 7

Repair

Table of Contents

iii

E1999 Nordson Corporation

Issued 7/99 Manual 12-12

7. RF Screen Removal/Replacement 7-5. . . . . . . . . . . . . . . . . . . . . . . . . . .

8. Lamp Bulb Removal/Replacement 7-6. . . . . . . . . . . . . . . . . . . . . . . . . . .

9. Reflector Removal/Replacement 7-7. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Removal 7-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Replacement 7-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1. Introduction 8-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Using the Illustrated Parts List 8-1. . . . . . . . . . . . . . . . . . . . . . . . . . . .

2. Oven Parts List 8-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Front Panel and Curing Chamber 8-2. . . . . . . . . . . . . . . . . . . . . . . . .

Focal Adjustment 8-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Reciprocator 8-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

UV Lamp Enclosure 8-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Power Supply 8-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Entry/Exit Conveyor 8-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Reciprocator Linkage 8-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Conveyor Motor Drive 8-10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

AC Cabinet 8-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3. Service Kits 8-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1. System Requirements 9-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Electrical 9-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Air 9-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Floor Space 9-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2. Schematics 9-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Section 8

Parts

Section 9

Specifications

Table of Contents

E1999 Nordson Corporation

108 183C

Issued 7/99

Manual 12-12

E1998 Nordson Corporation

Section 1

Safety

1-0

E1998 Nordson Corporation

Issued 10/98

S1EN–03–[SF–LECAP]–7

Safety

1-1

E1998 Nordson Corporation

Section 1

Safety

Read and follow these safety instructions. Task- and equipment-specific

warnings, cautions, and instructions are included in equipment

documentation where appropriate.

Make sure all equipment documentation, including these instructions, is

accessible to persons operating or servicing equipment.

Equipment owners are responsible for making sure that Nordson

equipment is installed, operated, and serviced by qualified personnel.

Qualified personnel are those employees or contractors who are trained

to safely perform their assigned tasks. They are familiar with all relevant

safety rules and regulations and are physically capable of performing

their assigned tasks.

Use of Nordson equipment in ways other than those described in the

documentation supplied with the equipment may result in injury to

persons or damage to property.

Some examples of unintended use of equipment include

Susing incompatible materials

Smaking unauthorized modifications

Sremoving or bypassing safety guards or interlocks

Susing incompatible or damaged parts

Susing unapproved auxiliary equipment

Soperating equipment in excess of maximum ratings

Make sure all equipment is rated and approved for the environment in

which it is used. Any approvals obtained for Nordson equipment will be

voided if instructions for installation, operation, and service are not

followed.

1. Introduction

2. Qualified Personnel

3. Intended Use

4. Regulations and

Approvals

Safety

1-2

E1998 Nordson Corporation

Issued 10/98

S1EN–03–[SF–LECAP]–7

To prevent injury follow these instructions.

SDo not operate or service equipment unless you are qualified.

SDo not operate equipment unless safety guards, doors, or covers are

intact and automatic interlocks are operating properly. Do not bypass

or disarm any safety devices.

SKeep clear of moving equipment. Before adjusting or servicing

moving equipment, shut off the power supply and wait until the

equipment comes to a complete stop. Lock out power and secure the

equipment to prevent unexpected movement.

SRelieve (bleed off) hydraulic and pneumatic pressure before adjusting

or servicing pressurized systems or components. Disconnect, lock

out, and tag switches before servicing electrical equipment.

SWhile operating manual spray guns, make sure you are grounded.

Wear electrically conductive gloves or a grounding strap connected to

the gun handle or other true earth ground. Do not wear or carry

metallic objects such as jewelry or tools.

SIf you receive even a slight electrical shock, shut down all electrical or

electrostatic equipment immediately. Do not restart the equipment

until the problem has been identified and corrected.

SObtain and read Material Safety Data Sheets (MSDS) for all materials

used. Follow the manufacturer’s instructions for safe handling and

use of materials, and use recommended personal protection devices.

SMake sure the spray area is adequately ventilated.

STo prevent injury, be aware of less-obvious dangers in the workplace

that often cannot be completely eliminated, such as hot surfaces,

sharp edges, energized electrical circuits, and moving parts that

cannot be enclosed or otherwise guarded for practical reasons.

5. Personal Safety

Indice

Altri manuali Nordson Forno

Nordson

Nordson 107 041A Manuale utente

Manuali Forno popolari di altre marche

Bosch

Bosch HVA531NS0 Manuale utente

Electrolux

Electrolux EOF6P46X Manuale utente

NEFF

NEFF B44S32 5GB Series Manuale utente

Combi

Combi BLODGETT BC142GDS Manuale utente

AEG

AEG COMPETENCE 311704300 Manuale utente

Falcon

Falcon DOMINATOR PLUS G3106 Series Guida utente

Rational

Rational SCC WE 61G Manuale utente

Smeg

Smeg DOSPA38X Manuale di installazione e funzionamento

Electrolux

Electrolux air-o-convect 20 GN 2/1 Manuale utente

Miele

Miele HR 1954-2 Manuale utente

KHIND

KHIND OT50 Manuale utente

Henny Penny

Henny Penny Smoker Box Manuale utente

Lang

Lang ECOD-AP Manuale utente

AEG

AEG BEK455310M Manuale utente

Frigidaire

Frigidaire FNGE90JGR Manuale utente

Hotpoint

Hotpoint FE9 S831 JSH IX Manuale utente

GE Advantium SCB2000 Manuale utente

AEG

AEG DE401301DM Manuale utente