NOREGON DLA+ 2.0 Manuale utente

DLA+ 2.0 Adapter Family User’s Manual

License Agreement

Noregon Systems Inc. retains all ownership to the DLA+ 2.0 Adapter Family ( DLA+ 2.0, DLA+ 2.0 Wireless and the Trailer

Diagnostic Adapter) and its documentation. The DLA+ 2.0 Adapter Family ( DLA+ 2.0, DLA+ 2.0 Wireless and Trailer

Diagnostic Adapter) source code is a confidential trade secret of Noregon Systems, Inc. You may not decode or de-compile

the DLA+ 2.0 Adapter Family ( DLA+ 2.0, DLA+ 2.0 Wireless and Trailer Diagnostic Adapter) software, develop source code

for the DLA+ 2.0 Adapter Family ( DLA+ 2.0, DLA+ 2.0 Wireless and Trailer Diagnostic Adapter), or knowingly allow others

to do so. The DLA+ 2.0 Adapter Family ( DLA+ 2.0, DLA+ 2.0 Wireless and Trailer Diagnostic Adapter) and its

documentation may not be sublicensed or transferred without the prior written consent of Noregon Systems, Inc.

This publication, as well as the software it describes, is furnished under license and may only be used or copied in

accordance with the terms of such license. The content of this manual is provided for informational use only, is subject to

change without notice, and should not be construed as a commitment by Noregon Systems, Inc. Noregon Systems, Inc.

assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual.

Without the prior written permission of Noregon Systems, Inc., except as permitted by such license, no portion of this

documentation may be reproduced, or transmitted, in any form or by any means, electronically, mechanically, or

otherwise.

holders. Pictures, figures and tables are for illustration purposes only. Product specifications are subject to change without

notification.

The DLA+ 2.0 Wireless adapter is compliant with Part 15 of the FCC Rules. The device contains an RF transmitter (ID 3867A

MTCHDRCT). THE FCC ID is R68 MTCHDRCT.

www.noregon.com

 
3 
Installation Notes 
Table of Contents 
 
License Agreement.....................................................................................................................................................2 
Table of Contents .......................................................................................................................................................3 
The Noregon DLA+ 2.0 Adapter Family ..................................................................................................................4 
LED Indicators.........................................................................................................................................................4 
Product Specifications and System Requirements.....................................................................................................6 
Supported Protocols and Standards.......................................................................................................................7 
Supply Voltage........................................................................................................................................................7 
Temperature...........................................................................................................................................................8 
Electromagnetic Compatibility...............................................................................................................................8 
Transient Protections .............................................................................................................................................8 
Electro-Static Discharge Protection........................................................................................................................8 
Installation Notes .......................................................................................................................................................9 
Driver Installation................................................................................................................................................ 10 
DLA+ 2.0 Wireless Configuration......................................................................................................................... 13 
The DLA+ 2.0 Wireless Minder......................................................................................................................... 13 
Configuring the DLA+ 2.0 Wireless Adapter (ASSY REV A.xx) .......................................................................... 14 
Configuration on a Local / Corporate Network ............................................................................................... 16 
Configuring the DLA+ 2.0 Wireless Adapter (ASSY REV B.xx) .......................................................................... 31 
Establishing the Connection Between your PC and the Adapter........................................................................ 35 
The Favorites Feature to Select IP Addresses ..................................................................................................... 37 
Updating Adapter Firmware................................................................................................................................ 40 
Automatic Firmware Update........................................................................................................................... 40 
Manual Firmware Update ............................................................................................................................... 42 
Wireless Reception Guidelines for DLA+ 2.0 Wireless ............................................................................................ 45 
Testing Vehicle Connections.................................................................................................................................... 47 
Frequently Asked Questions and Troubleshooting................................................................................................. 48 
RP1210 Error Codes............................................................................................................................................. 49 
Technical Support.................................................................................................................................................... 51 
Appendix 1 –Windows 8/10 Configuration via Windows Mobile HotSpot............................................................. 52 
Windows Mobile HotSpot Configuration ............................................................................................................ 52 

DLA+ 2.0 Adapter Family User’s Manual

Adapter Configuration for DLA+2.0 Wireless Adapter (ASSY REV A.xx).............................................................. 53

Adapter Configuration for DLA+2.0 Wireless Adapter (ASSY REV B.xx) .............................................................. 55

Introduction

The Noregon DLA+ 2.0 Adapter Family

The Noregon DLA+ 2.0 Adapter Family ( DLA+ 2.0, DLA+ 2.0 Wireless Adapter and Trailer Diagnostic Adapters)

are diagnostic devices that communicate with vehicle data for display on a PC-based diagnostic software

application. Starting in 2016, CARB and EPA mandated standard that all vehicles support 500K J1939, resulting in

the development of a new Type-2 9-pin connector. This connector can have up to 3 CAN channels (Tri CAN).

The DLA+ 2.0 and DLA+ 2.0 Wireless adapters and their cables will work with all existing vehicles and with newer

vehicles that will have the Type-2 9-pin connector.

LED Indicators

Noregon DLA+ 2.0 Adapter Family of products will support different LED indicators. The following table defines

the LEDs and meaning per adapter:

J1708

Tri CAN/J1939

K-Line (KWP, ISO9141)

J1850 (VPW –GM)

J2497 / PLC4Trucks

USB Connectivity

Wireless (802.11 b/g)

Firmware updates (via USB)

Power (from Vehicle)

Power (from USB)

NOTE: Instructional materials are also found on the installation USB flash drive or on the

“Resources” section of www.Noregon.com website.

DLA+ 2.0

DLA+ 2.0 Wireless

Trailer Diagnostics

Installation Notes

Adapter

Green LED

(Power)

Red LED

(Data)

Red LED

(ABS AMP)

Red LED

(Wireless)

DLA+ 2.0

N/A

DLA+ 2.0 Wireless

N/A

Trailer Diagnostics

N/A

POWER (green) LED:

1. Off when no power is applied.

2. Illuminates green when vehicle or USB side power is supplied.

DATA (red) LED:

1. Flashes red once per second (heartbeat) to indicate Adapter is ready for use and no data is being

transmitted on the device (DLA+ 2.0 and DLA+ 2.0 Wireless only).

2. Flashes steady red when the device is reading data regardless of protocol.

ABS Lamp (red) LED: (TDA adapter ONLY)

1. The device acts like the tractor ABS light and will follow the SAE J2497 standard.

WIRELESS (red) LED:

1. Indicates wireless network (802.11) association.

2. Solid lit LED when adapter is connected to a wireless network.

3. ASSY REV B.xx hardware wireless LED:

a. Fast Blink: Reboot/Error. This happens briefly when the wireless reboots. If it persists then the

wireless cannot ‘init’the Wi-Fi subsystem.

b. Single Blink: Adapter is in Stand-alone Access Point mode but not connected.

c. Double Blink: Adapter is in Infrastructure mode but not connected.

d. Solid on: Adapter is connected to Wireless network (Peer to Peer OR Infrastructure mode).

DLA+ 2.0 Adapter Family User’s Manual

Product Specifications and System Requirements

32-Bit Operating System Requirements

Windows 7 Pro (current

service pack)

Windows 8

Windows 10

32-bit Minimum PC Requirements

Pentium IV or faster

1 GB RAM

100 MB free hard disk space

1 free USB 2.0 port

Wireless PC card required

Trailer Diagnostics

DLA+ 2.0 Wireless

DLA+ 2.0

Installation Notes

Supported Protocols and Standards

RP1210 Protocols

CAN

(GMLAN, J2284)

J1708/J1587

J1850 (VPW –GM)

J1939

ISO 15765

ISO 9141-2

ISO 14230

(KWP2000)

PLC

J2534 Protocols

CAN (Raw CAN)

ISO 11898

GMLAN (HSCAN)

ISO 9141-2

ISO 14230

(KWP2000)

ISO 15765-4

J1850 VPW

(GM Class II)

Supply Voltage

The following table specifies the voltage required by the DLA+ 2.0 Adapters.

Vehicle Input Voltage

Range

9-36 VDC

USB Voltage

5.0 VDC

Current Consumption

No more than 500mA

DLA+ 2.0

DLA+ 2.0 Wireless

Trailer Diagnostics

DLA+ 2.0 Adapter Family User’s Manual

Temperature

The DLA+ 2.0 Adapters shall operate over the following temperatures and meet all of its functional and

performance specifications.

Storage Range

-40to 176F

(-40to 80C)

Operating Range

0to 149F

(-18to 65C)

Electromagnetic Compatibility

The DLA+ 2.0 Wireless Adapters comply with FCC Part 15 technical standards regarding electromagnetic

radiation.

Transient Protections

The DLA+ 2.0 Wireless Adapters are designed to meet SAEJ1455 requirements for 12-volt systems.

Electro-Static Discharge Protection

The DLA+ 2.0 Wireless Adapters are designed to meet SAEJ1455 for 12-volt systems.

WARNING:

DO NOT ATTEMPT TO USE REPROGRAMMING FEATURES

WHILE IN WIRELESS MODE (use USB mode).

NOTE: Check the www.Noregon.com website for the very latest product specifications and system

requirements.

Installation Notes

Before installing drivers and adapters, note:

•Installation requires administration privileges.

•Installation steps (and subsequent screens) will vary based on user systems (Windows OS version) and

type of adapter being installed. Most illustrated installation steps are for a DLA+ 2.0 Wireless Adapter.

•Installation files can be accessed using a USB flash drive or online at

http://www.noregon.com/adapter-drivers.

Insert the DLA+ 2.0 Driver USB Flash drive or the Professional USB flash drive into your USB port or download

the latest adapter drivers from http://www.noregon.com/adapter-drivers.

If using the supplied USB flash drive, the installation program will begin automatically. Click the Install Adapter

Drivers button to begin.

If using drivers downloaded from the website, begin the installation process by running the downloaded file.

DLA+ 2.0 Adapter Family User’s Manual

Driver Installation

Periodically check http://www.noregon.com/adapter drivers for the latest driver updates.

1. If the install program does not start automatically, start the program by running the Application.exe.

2. When the User Account Control box appears, select Yes to launch the install.

3. The Installer will appear, select Install to begin.

Figure 1

NOTE: The screen shown in the example reflects installing a DLA+ 2.0 Wireless Adapter; however, the driver installation

steps for all DLA+ 2.0 Adapters are the same.

4. This screen appears; select the Next button.

Figure 2

Altri manuali per DLA+ 2.0

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali NOREGON Adattatore

NOREGON

NOREGON DLA+ 2.0 Manuale utente

NOREGON

NOREGON Trailer Diagnostic Adapter Manuale utente

Manuali Adattatore popolari di altre marche

PCB Piezotronics

PCB Piezotronics 090B274 Manuale utente

Auvidea

Auvidea J20 Manuale del prodotto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuale utente

Akribis

Akribis ITF-21-BISS-MIT Manuale utente

Tenda

Tenda W54U Manuale utente

ROHO

ROHO AGILITY Manuale utente

PROLiNK

PROLiNK WN2001 Manuale utente

Hawking

Hawking HUF2 Manuale utente

Airlink101

Airlink101 AWLC4030 Manuale utente

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuale utente

Philips

Philips SWA4554S/10 Manuale utente

JVC

JVC TS-C9D2B Manuale di istruzioni

NETGEAR

NETGEAR A6100 Manuale utente

D-Link

D-Link DWA-121 Manuale utente

Philips

Philips SWA2037 Manuale utente

Basalte

Basalte 0610-20 Manuale utente

Yealink

Yealink EHS40 Manuale utente

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuale utente