Noritsu LS-600 Come usare

LS-600

2Starting Guide

This manual covers precautions and other information you need to know before

operating this product.

1. For your safety

2. Getting Started

3. Turing power on/off

4. Emergency operation

5. Mastering basic operations

6. Daily maintenance

7. How to access the HELP display

8. Accessories and consumable parts

English Ver. 1

This page is intentionally blank.

Preface

We greatly appreciate your purchase of this product.

Before using this product, read the manual carefully, and make sure that you understand the procedure described. Be sure to

store the paper manual near the product so it can be referred to immediately should you have questions about operation or

should any problems arise.

If you should lose or heavily damage the manual, contact your place of purchase.

[Issued in April, 2007]

!It is prohibited to dopy or reproduce this manual.

!This manual is subject to change without notice.

!Illustrations in the manual may differ from your system depending on the model or manufacturing lot.

!Should you find any unclear points or errors, or should you have any comments for the manual, please contact your place

of purchase.

!If there is a missing page or incorrect pagination in this manual, please contact your place of purchase to receive a

replacement. We will replace it.

Microsoft, MS-DOS and Windows are registered trademarks of Microsoft Corporation in the United States and/or other

countries.

"UNLHA(32).DLL" is free softtware published by Micco.

DIGITAL ICE is a trademark of Kodak.

This software is based in part on the work of the Independent JPEG Group.

Other product and company names mentioned herein may be the trademarks of their respective owners. Trademark symbols,

ô and Æ, are not shown in the manual itself.

Export Control

This Product shall be exported pursuant to the Japan Foreign Exchange and Foreign Trade Control Law, and Export Control of

Administration on Regulations of the U. S. Bureau of Industry and Security, and relevant laws and regulations. If Buyer re-

exports, directly or indirectly, the product to any country, the rules or regulations immediately preceding and relevant laws and

regulations of the countries concerned shall be applied.

iii

Explanation of manual

Manual types/contents

The following manuals are supplied with this product.

Before starting operation, read the EZ Controller Operator's Manual to understand how to print from films and how to

save images from films.

Manual type Main contents

Specifications ï Processing capacity

ï Standard equipment/ Standard accessories/ Options

ï Installation requirements

Starting Guide "For your safety

IMPORTANT

ï This section explains general safety precautions. Read these

precautions thoroughly and carefully.

"Getting Started

This section explains topics you need to know before using this product.

"Turing power on/off

This section explains how to turn the product's power on and off.

"Emergency operation

This section explains the procedure to turn off the power supply in an

emergency or corrective actions for the case that the scanner makes

abnormal sounds.

"Mastering basic operations

This section explains operation methods such as how to scan films.

"Daily maintenance

This section explains maintenance procedures of this product.

"How to access the HELP display

You can view the built-in manuals (HELP) on the display. This chapter

explains how to access the Help display.

"Accessories and consumable parts

ï Accessories and consumable parts

This manual is provided in a hard copy,

on built-in Help, and on a CD.

Symbols used in this manual

This section explains the definitions of the symbols used in this manual.

Operator's Manual "Available functions on each display

This section explains available functions on each display.

"Configuring initial settings

This section explains settings that are required to be configured before you

use this product.

"Configuring settings of the scanning method

This section explains settings for scanning films such as image correction,

frame advance and frame number settings.

"Making corrections to colors and density

This section explains procedures to making corrections to colors and density

on the Judgment Display.

"Operations performed when necessary

This section explains saving and loading the scanner setting data or

upgrading the program, etc.

"Troubleshooting

This section explains corrective actions to perform when an error or

attention message is shown.

"Quick reference

This section explains corrective actions to perform if films frequently jam or

black margin appears on prints.

"Glossary

This section explains terms in this manual.

Operator's Manual (options) This manual explains how to operate each option.

The Operator's Manual is supplied for each option.

Installation Manual This section explains procedures to install the product, install various software

and configure various settings.

Manual type Main contents

This manual is available on built-in Help

of this system and on a CD.

The symbols shown below are used in this manual. Confirm the meaning of each of them before reading the manual.

The pointing finger

indicates the manual or

section where you can find

additional information.

The Important symbol indicates

supplementary explanations,

operations or procedures that

require caution, and

instructions that must be

followed.

This is called the alert symbol.

Text following this symbol contains particularly important information concerning

safety. Be sure to heed this information. This symbol is used in conjunction with the

words DANGER, WARNING and CAUTION, according to the possible degree of

injury to people or damage to physical property.

The Note symbol indicates useful

information on functions and

instructions.

Reference

G068176

TABLE OF CONTENTS

Preface

Explanation of manual ........................................................................................................................... iii

Manual types/contents ................................................................................................................... iii

Symbols used in this manual .........................................................................................................iv

1. For your safety

1.1 Description of warnings (signal words) ........................................................................... 1 - 2

1.2 Location of warning labels .............................................................................................. 1 - 3

1.3 For your safety ................................................................................................................ 1 - 4

1.4 Additional precautions..................................................................................................... 1-6

1.5 Precautions for handling films......................................................................................... 1 - 7

2. Getting Started

2.1 Manuals supplied if a printer and the EZ Controller are connected ................................ 2 - 2

2.2 Names of the components .............................................................................................. 2 - 3

2.2.1 Names and functions of components............................................................................................. 2 - 3

2.3 Processable films............................................................................................................ 2-5

2.3.1 Processable films........................................................................................................................... 2 - 5

2.3.2 Processable film size ..................................................................................................................... 2 - 5

2.3.3 Processable film length.................................................................................................................. 2 - 5

2.3.4 Problematic films and corrective actions ...................................................................................... 2 - 6

2.3.5 Processing an IX240 film cartridge that cannot be scanned.......................................................... 2 - 9

3. Turing power on/off

3.1 Starting up and closing down this product ...................................................................... 3 - 2

3.1.1 Starting up the product .................................................................................................................. 3 - 2

3.1.2 Closing down the product.............................................................................................................. 3 - 2

4. Emergency operation

4.1 Emergency operation...................................................................................................... 4 - 2

4.1.1 Restarting the product because an error occurs............................................................................. 4-2

4.1.2 Turning off the power supply in an emergency............................................................................. 4-2

4.1.3 If the scanner makes abnormal sounds.......................................................................................... 4 - 3

5. Mastering basic operations

5.1 Scan Setting display ....................................................................................................... 5-2

5.1.1 Accessing the Scan Setting display ............................................................................................... 5 - 2

5.2 Environment display........................................................................................................ 5-4

5.2.1 Accessing the Environment display .............................................................................................. 5 - 4

5.2.2 Environment display...................................................................................................................... 5 - 5

vii

5.3 Menu display................................................................................................................... 5 - 6

5.3.1 Accessing the Menu display.......................................................................................................... 5 - 6

5.3.2 Menu display ................................................................................................................................. 5 - 7

5.4 Scanning 135-type film ................................................................................................... 5 - 9

5.5 Scanning IX240 film cartridge ....................................................................................... 5 - 17

5.6 Scanning IX240 film taken out of the cartridge ............................................................. 5 - 25

6. Daily maintenance

6.1 Introduction of daily maintenance ................................................................................... 6 - 2

6.1.1 Maintenance items and timing....................................................................................................... 6 - 2

6.2 Weekly Checks ............................................................................................................... 6 - 3

6.2.1 Cleaning the film feed section....................................................................................................... 6 - 3

6.3 Monthly Checks .............................................................................................................. 6 - 7

6.3.1 Cleaning the scanner dust-proof glass........................................................................................... 6 - 7

6.3.2 Cleaning the 135 rewinding unit ................................................................................................... 6 - 8

6.3.3 Cleaning each roller and the film path of the film feed unit ....................................................... 6 - 11

6.3.4 Cleaning each brush of the film feed unit ................................................................................... 6 - 13

6.3.5 Cleaning the magnetic head......................................................................................................... 6 - 14

6.3.6 Cleaning the film inserting slot of the 240 rewinding box.......................................................... 6 - 16

6.3.7 Cleaning the air filter................................................................................................................... 6 - 17

7. How to access the HELP display

7.1 Accessing the HELP display ........................................................................................... 7 - 2