• Do notkink orpinchthepowersupplycordbetweentheicemakerandcabinet.
• Thefuse(orcircuit breaker)sizeshouldbe15amperes.
• It isimportantfortheicemakerto beleveledin ordertoworkproperly.Othe_visewater
maynotflow properlytkroughtheevaporator(icemold).Theiceproductionwill beless
thannormal.Youmayneedtomakeseveraladjustmentstolevelit.
• All installationsmustbein accordancewith localplumbingcoderequirements.
• Makecertainthathosesarenotpinched,kinkedordanlagedduringinstallation.
• Checkfor leaksafterwaterlineisconnected.
• Althoughtheunithasbeentestedandcleanedatthefactory,dueto long-termtransitand
storage,thefirst batchof cubesmustbediscarded.
• Removethepackingmaterialsandcleantheicemakerbeforeusing.
• Turnonthewatersupplytap before switching on the ice maker. Never turn the water
supply tap off when the ice maker is working.
• Except to take ice from the unit, keep the door closed in order to reduce ice melting and
to promote proper ice formation.
• If the ice maker will not be used for a long time, before the next use it must be
thoroughly cleaned. Follow carefully any instructions provided tbr cleaning or use of
sanitizing solution. Do not leave any solution inside the ice maker after cleaning.
• Do not touch the condenser fins. They are sharp and can be easily damaged.
• DO NOT use solvent-based cleaning agents or abrasives on the interior. These cleaners
may transmit taste to the ice cubes, or damage or discolor the interior.
° The ice machine cleaner contains acids .Do not use or mix with any other solvent-based
cleaners products. Use rubber gloves to protect hands. Carefully read the safety
instructions on the container of the ice machine cleaner.
• Do not use the apparatus other than for its intended purpose,
SAVE THESE INSTRUCTIONS
Electrical Connection
Do not, under any circumstances, cut or remove the third (ground) prong from the power
cord. For personal safety, this appliance must be properly grounded. The power cord of
this appliance is equipped with a 3-prong grounding plug that mates with a standard
3-prong grounding wall outlet to minimize the possibility of electric shock hazard from
the appliance. Have the wall outlet and circuit checked by a qualified electrician to make
sure the outlet is properly grounded. When a standard 2-prong wall outlet is encountered,
it is your responsibility and obligation to have it replaced x.vith a properly grounded
3-prong walt outlet. The ice maker should always be plugged into its own individual
electrical outlet which has a voltage rating that matches the rating label on the appliance.
This provides the best performance and also prevents overloading house wiring circuits
which could cause a tire hazard from overheated wires. Never unplug your ice maker by
pulling on the power cord. Always grip the plug firl'My and pull straight out from the
outlet. Repair or replace immediately aI1 power cords that have become frayed or
otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its
length or at either end. When moving the ice maker, be careful not to damage the power
cord.
