Nortel BayStack 100-S Manuale utente

Wall Mounting the Instant Internet 100-S Unit

*211487-A*

You can mount the BayStack Instant Internet 100-S unit on any drywall, wood, or cement wall that is

at least 0.39 inches (10 mm) thick and is capable of supporting the combined weight of the unit and

attached cables (approximately 11 pounds or 5 kg).

A set of brackets, self-tapping (3.5x16) drywall screws, and (3x18) plastic expansion lugs (Figure 1)

has been included with the Instant Internet 100-S unit. You will need a Phillips screwdriver, which is

not included with the unit. If you are mounting the unit on a drywall or cement wall, you will need a

drill and a 1/4-inch drill bit, which are also not included with the unit. If you are mounting the unit

on a wood wall, you will need a #6 wood screw (not included) that is long enough to penetrate the

wood by at least 1/2-inch.

Figure 1 provides a template for you to use as a guide for placing the screws in the wall.

Figure 1 Template for correct placement of holes in the wall

To use this template:

1Trace the illustration onto another piece of paper.

2Cut out the tracing, making sure to cut out the holes provided for the screws.

3Place the tracing against the wall where you would like to mount the Instant Internet 100-S unit.

4Using a pencil, trace inside the holes that you have cut out to mark where the screws should go.

5Remove the tracing and place the screws where you have marked.

10119EA

*211487-A*

Preparing a drywall or a cement wall for mounting

To mount your Instant Internet 100-S on a drywall or cement wall, you must first prepare the wall.

To prepare a drywall or cement wall for mounting the Instant Internet 100-S unit:

1Use a drill and a 1/4-inch (0.63~0.65 mm) drill bit to drill four 1 1/16-inch (27.0 mm) deep holes

where you marked the wall with the template.

2Insert each of the plastic expansion lugs included with the unit into the four newly drilled holes.

3Repeat steps 1 & 2 for the other mounting bracket.

Mounting the Instant Internet 100-S on a wall

To mount the Instant Internet 100-S on a wood wall or a prepared drywall or cement wall:

1Place the bracket against the wall where you marked the wall with the template.

Align the holes in the bracket with the expansion lugs if you are mounting on a drywall or

cement wall.

2Insert each of the four screws through the holes in the bracket and into the wood wall or the

expansion lugs.

To mount your Instant Internet 100-S on a wood wall, use only wood screws; do not use the

plastic expansion lugs.

3Screw in the screws.

4Repeat steps 1, 2, & 3 for the other mounting bracket.

Figure 2 shows the components and illustrates the combined procedures for preparing a drywall or

cement wall and for mounting the unit on the wall.

Figure 2 Components for mounting the BayStack Instant Internet 100-S unit on a wall

For more information on mounting your BayStack Instant Internet 100-S unit, refer to Setting Up the

BayStack Instant Internet 100-S Unit (part number 209374-A).

LEGEND

1 Hole drilled in the wall 3 Wall mount bracket

2 Plastic expansion lug 4 Self-tapping drywall screw or #6 wood screw

10095EA

12 3 4

Altri manuali per BayStack 100-S

6

Indice

Altri manuali Nortel Hardware di rete

Nortel

Nortel 9115 Manuale utente

Nortel

Nortel BCM200 Manuale del prodotto

Nortel

Nortel BCN Dimensioni

Nortel

Nortel BayStack 100-S Manuale di istruzioni

Nortel

Nortel Meridian 1 Option 11C Manuale di installazione e funzionamento

Nortel

Nortel 6000 Series Manuale utente

Nortel

Nortel IVR 2.5/S Manuale utente

Nortel

Nortel Passport 8683POS Guida

Nortel

Nortel SONET AccessNode Manuale utente

Nortel

Nortel 5399 Manuale utente

Nortel

Nortel BayStack 100-S Manuale utente

Nortel

Nortel SONET AccessNode Manuale utente

Nortel

Nortel SONET AccessNode Manuale utente

Nortel

Nortel Norstar Compact Plus Manuale utente

Nortel

Nortel RLC Manuale di istruzioni

Nortel

Nortel Remote Office 9150 Manuale di istruzioni

Nortel

Nortel CS 1000M HG Manuale utente

Nortel

Nortel Passport 8000 Series Istruzioni di montaggio

Nortel

Nortel SONET AccessNode 800A Series Manuale utente

Nortel

Nortel BayStack 100 Series Istruzioni utente

Nortel

Nortel Meridian 1 Option 11C Manuale utente

Nortel

Nortel BayStack 650 Manuale

Nortel

Nortel BayStack 600 Series Manuale di istruzioni

Nortel

Nortel BayStack 100-S Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente