Nortel 7100 Manuale utente

P0609371 01

March 24, 2004

Business Communications Manager

Telephone Feature User Guide

Page 3

Note: Your telephone may not have access to all the features listed in this guide. This may be

because your telephone does not support the feature, or because the feature has not been

enabled at your telephone. Your system administrator can provide details.

Telephone button icons

The Business Series Terminal (T-series) Feature button is a small globe icon. The M-series

Feature button reads Feature or Fx. The IP telephones display Feature above the far left

display key, when feature selection is available.

This book uses FEATURE to indicate pressing the Feature key before entering a feature

code. The table below shows which buttons to use on the different types of Nortel Networks

telephones to use the features. Refer to each user card for specific details about each type

of telephone.

Button

Function

Business Series

Terminals (T-series) Legacy telephones (M-series) IP telephones

(20XX)

Feature , Display key

Hold , , ,

Release ,

Answer call

Telephones with line buttons:

Press active line button or Intercom key and lift handset.

Telephones with no buttons:

Lift handset.

This guide uses the following labels to indicate each type of configuration button:

•FEATURE indicates pressing the Feature key

•HOLD indicates pressing the Hold key.

•RLS indicates pressing the Release key

Page 4

Telephone features

Background

Music FEATURE 86 Cancel: FEATURE #86

Listen to music (provided by an external source or an IP source connected

to the system) through your telephone speaker when you are not on a call.

Button Inquiry FEATURE *0

Check what is programmed on any button. Use when labeling buttons.

Call Duration

Timer FEATURE 77

Briefly display the approximate length of your current or most recent call.

Call Forward FEATURE 4 Cancel: FEATURE #4

Send your calls to another telephone in your system.

Call park FEATURE 74

Put a call on hold so that it can be picked up from any telephone in your

system. The display shows a three-digit retrieval code.

To retrieve a parked call: press an intercom button and dial the retrieval

code. On model 7000, 7100 and 2001telephones, just lift the handset and

dial the retrieval code.

Call Pickup,

directed FEATURE 76 and the telephone number

Answer any ringing telephone.

Call Pickup,

group FEATURE 75

Answer a call that is ringing at another telephone in your pickup group. The

external call that has been ringing longest is answered first.

Call Queuing FEATURE 801

Answer the next call. If more than one call is waiting, priority is given to

incoming external calls over callback, camped, or transferred calls.

Camp-on FEATURE 82 and the extension number of the receiving telephone

Re-route a call to another telephone even if all its lines are busy.

Class of service

password FEATURE 68 plus COS password

Change the dialing filters on a line or telephone, or gain external access to

your system. Dialing filters determine which numbers you can dial.

The COS password is provided by your System Administrator to change

your class of service.

Page 5

Conference FEATURE 3

Establish a conference call between yourself and two other parties.

1. Make or answer the first call.

2. Put the first call on hold.

3. Make or answer the second call.

4. After the second call is connected, press FEATURE 3.

5. Press the line or intercom button of the first held call (not required on

model 7000, 7100 or 2001 telephones).

6. Press RLS to end the conference call.

To remove yourself from a conference permanently (unsupervised

conference):

Press FEATURE 70.

The other two callers remain connected. (Some external lines may not

support this feature.)

To put a conference on hold:

Press HOLD. The other two callers can still talk to each other.

To split a conference:

Press the line or intercom button of one caller to consult privately while the

other caller is on hold.

To re-establish the conference: Press FEATURE 3.

To disconnect one party:

1. Press the line or intercom button for the caller you want to disconnect.

2. Press RLS.

3. Press the line or intercom button for the remaining caller to resume your

conversation.

To independently hold two calls:

1. Press the line or intercom button of the first caller.

2. Press HOLD. The second caller is automatically put on hold.

To re-establish the conference:

1. Retrieve one call from hold.

2. Press FEATURE 3.

3. Retrieve the second call from hold.

Telephone features

Page 6

To send Hookswitch or DTMF during a conference call

Either system telephone engaged in a three-way conference call over a

Network CLID or DS trunk can issue a hookswitch or DTMF dialing request

without leaving the conference, if the feature is enabled.

Note: This feature is not available for i20xx telephones or Symbol

NetVision handsets.

– To hear DTMF tones on both telephones during dial, activate Long

Tones (FEATURE 808).

– To conference in someone through the trunk, use Link (FEATURE 71)

Contrast

adjustment FEATURE *7 plus a number from 1 to 9 to adjust the display contrast.

Press HOLD to set your choice.

Dialing modes FEATURE *82

Choose one of three methods of dialing.

1. Press FEATURE *82.

2. Press # to select the mode.

3. Press HOLD to store the mode.

Standard Dial: Select a line, then dial the number. (Standard Dial is

always available, even when another dialing mode is selected.)

Automatic Dial: Dial the number without choosing a line button first. Your

prime line is automatically selected for the call.

Pre-Dial: Dial the number, then press a line button to place the call. Edit

the number by pressing the volume bar before placing the call.

Do Not Disturb FEATURE 85 Cancel: FEATURE #85

When you are not on a call prevent all incoming calls, except priority calls,

from ringing at your telephone. When you are on a call, block an incoming

priority call.

Group

Listening FEATURE 802 Cancel: FEATURE #802

Use both the handset and speaker while you are on a call. To avoid elec-

tronic feedback, keep the handset away from the speaker during the call,

and press RLS to hang up. Note: Most of the portable handsets do not

have speakers, so cannot use this feature.

Telephone features

Page 7

Handsfree Handsfree/mute or Handsfree button

Press the key to transfer a call from the handset/headset to the telephone

speaker. If you picked up the handset, return it to the cradle.

Note: Handsfree speaker volume returns to the default volume set at the

telephone at the end of each call.

Hold Press HOLD

Temporarily suspend a call.

To retrieve a held call, press the line button for the held call.

(Press HOLD on model 7000, 7100 and 2001 telephones to toggle

between two calls.)

Hold -

Exclusive FEATURE 79 or FEATURE/HOLD

Temporarily suspend a call and prevent other telephones from picking it up.

Hold - Auto FEATURE 73 Cancel: FEATURE #73

Set your telephone to automatically put a call on Hold when you pick up a

second call, or stop your telephone from doing so. Default is Yes (feature is

on).

Note: Telephones which have system-wide call appearance buttons

(SWCA) must have this feature active (set to Yes).

Language

choice FEATURE *501: Select Primary Language for the telephone display.

FEATURE *502: Select Alternate Language for the telephone display.

FEATURE *503: Select Alternate Language 2 for the telephone display.

FEATURE *504: Select Alternate Language 3 for the telephone display.

Last Number

Redial FEATURE 5

Automatically redial the last external telephone number that you dialed.

Line pools FEATURE 64

With a line pool, telephones can share several lines for making calls.

1. Press FEATURE 64 or an intercom button.

2. Enter a line pool access code. (See your System Administrator for a list.)

Line

redirection FEATURE 84 Cancel: FEATURE #84

Send calls arriving on an external line to another telephone outside your

system. (Some external lines may not support this feature. See your

System Administrator.) This feature is not available on model 7000, 7100

or 2001 telephones.

Telephone features

Page 8

Link FEATURE 71

Generate a Link signal to access a PBX or other host exchange.

Long tones FEATURE 808

Generate a tone for as long as you hold down a button. This is used to

communicate with devices like fax or answering machines. Long tones are

in effect only for your current call.

Messages FEATURE 1 Cancel: FEATURE #1

Send a message to another telephone within your system.

To view and reply to your messages:

1. Press FEATURE 65.

2. Press * and # to view your message list.

3. Press 0 to call the person who left you the message.

To erase a message:

Press HOLD while viewing a message.

Moving line

buttons FEATURE *81

Change the position of your line or hunt group buttons.

1. Press FEATURE *81.

2. Press the line button that you want to move.

3. Press the button that you want to move the line to.

4. Press RLS. The two buttons are exchanged.

5. Update the button label strip on your telephone.

Line buttons cannot be exchanged with intercom, answer DN or handsfree

buttons.

Mute Handsfree/mute or Mute button

Press this button when you do not want the caller to hear anything from

your side of a handsfree call. The display light beside the button blinks

when the call is muted. The mute button on the T-series and i-series

telephones mutes all types of calls.

Page announcement note: A call retrieved from hold after a page

announcement does not necessarily remain muted.

Name and

number block FEATURE 819

Block the outgoing name and/or number for a specific call.

Telephone features

Page 9

Page FEATURE 60 and code (1 to 3) and zone (0 to 6)

Make a page announcement through either the internal (code 1) or

external (code 2) speakers, or both (code 3). Zone 0 pages all zones.

Page announcements are programmed to timeout after a pre-selected

amount of time which is set by your System Administrator.

Internal page

FEATURE 61 and zone (0 to 6)

Make a page announcement to all, or to a specific group of telephones,

through the telephone speakers. Zone 0 pages all zones.

External page

FEATURE 62

Make a page announcement through an external loudspeaker system.

Internal and external page

FEATURE 63 and zone (0 to 6)

Make a page announcement through both your telephone speakers and an

external loudspeaker system. Zone 0 pages all zones.

Incoming page during active call:

The system can be set to either:

• Put an active call on hold, and broadcast the incoming page.

• Archive the page until you hang up from the call.

This feature is set by your system administrator.

Note: Business Series Terminals: a call on mute when the page comes

in, will not remain muted when it is released from hold after the page.

Pause FEATURE 78

Program in an external autodial sequence to insert a 1.5-second delay.

For pulse dialing: * also inserts a 1.5-second delay.

Priority call FEATURE 69

Interrupt a person who is on a call.

A person on another call can press FEATURE 85 (Do Not Disturb) to block

priority calls.

Telephone features

Page 10

Privacy FEATURE 83

Change the privacy setting for an external line. If a line normally has

privacy, this permits another telephone that shares the line to join your call

by selecting the line while you are using it. If a line normally has privacy

disabled, this prevents another telephone that shares the line from joining

your call by selecting the line while you are using it. The privacy setting is

re-established once you end your call or when you enter the Privacy

feature code again.

Ring again FEATURE 2 Cancel: FEATURE #2

Monitor a busy or unanswered telephone, or a busy line pool within your

system. Ring Again signals you to call back when the telephone or line

pool becomes available.

Ring type FEATURE *6

Select a distinctive ring to help differentiate between your telephone and

others nearby.

1. Press FEATURE *6.

2. Enter the ring type number (1 to 4).

3. Press HOLD.

Ring volume FEATURE *80

Make your telephone ring so that you can adjust the volume. You can also

adjust the volume any time your telephone rings.

Run/stop FEATURE *9

Store more than one autodial number or external carrier feature code on

one memory button by inserting a break point between numbers or codes.

The first press of the button dials the first number or code; the next press

dials the next number or code. You can program up to four numbers or

codes separated by break points.

Saved number

redial FEATURE 67

Save a number to redial later. Enter the code while you are on a call that

you have dialed to save the number. Enter the code when you are not on a

call to redial the saved number.

Service

schedules FEATURE 870

Display the modes that have been turned on at a designated control set.

Telephone features

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Nortel Telefono

Nortel

Nortel T7208 Manuale elenco delle parti

Nortel

Nortel Meridian Meridian 1 Manuale utente

Nortel

Nortel Business Series Terminal T7000 Manuale elenco delle parti

Nortel

Nortel Meridian M3900 Manuale utente

Nortel

Nortel Meridian SL-100 M3905 Manuale utente

Nortel

Nortel Compact DR5 Manuale elenco delle parti

Nortel

Nortel N0060609 Manuale utente

Nortel

Nortel Industrial Handset Manuale utente

Nortel

Nortel Norstar T7316E Manuale utente

Nortel

Nortel Meridian M3902 Manuale utente

Nortel

Nortel Enterprise Edge M7208N Manuale elenco delle parti

Nortel

Nortel Meridian Meridian 1 Manuale tecnico

Nortel

Nortel Norstar T7316E Manuale utente

Nortel

Nortel M5316 Manuale utente

Nortel

Nortel 3902 Manuale utente

Nortel

Nortel DMS-100 Series Manuale per l'uso e la cura

Nortel

Nortel NORSTAR M7324 Manuale utente

Nortel

Nortel DMS-100 Series Manuale per l'uso e la cura

Nortel

Nortel M3905 Manuale utente

Nortel

Nortel M7410 Manuale di istruzioni

Nortel

Nortel NORSTAR Modular ICS 6.1 Manuale utente

Nortel

Nortel Enterprise Edge CAPN Manuale elenco delle parti

Nortel

Nortel Enterprise Edge Prime Manuale elenco delle parti

Nortel

Nortel ICS 6.1 Manuale utente

Manuali Telefono popolari di altre marche

GE 2-9480 Manuale utente

Geemarc

Geemarc PHOTOPHONE 155 Manuale utente

D-Link

D-Link DWR-720/PW Manuale utente

Interquartz

Interquartz Gemini IQ333 Manuale utente

SSS Siedle

SSS Siedle HT 840-0 Manuale utente

Motorola

Motorola TITANIUM Manuale utente

Panasonic

Panasonic ICX Manuale utente

LG H870DS Manuale utente

Samsung

Samsung GT-I9500 Manuale utente

AT&T

AT&T Trimline 205 Manuale utente

Selta

Selta zenyth 600 Manuale utente

Doro

Doro AFTI 20 Manuale utente

UNIQCELL

UNIQCELL A1 Manuale utente

Panasonic

Panasonic KX Series Manuale utente

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manuale utente

BT Decor 425 Manuale utente

NEC

NEC SV8500 Manuale utente

Teledex

Teledex PEARL Manuale utente