3
ENGLISH
Motion Sensor Solar Wall Light
Art.no 36-9068 Model HJ9104
Please read theentire instruction manual before using theproduct and then save it for future reference.
We reserve theright for any errors in text or images and any necessary changes made to technical
data. In theevent of technical problems or other queries, please contact our Customer Services
(see address details on theback).
Safety
• Handle theproduct with care, making sure not to damage thesurface of thesolar panel and
ensuring that it is not covered with dust or affected by other contaminants.
• The product must not be changed or modified in any way.
• Do not let children play with theproduct.
Installation
• Use anappropriate fastening method for thewall in question.
• Make sure that there are no water pipes or electrical cables hidden in thewall where you
intend to drill or screw.
Important considerations:
• The solar panel should be installed where it can receive as much sunlight as possible.
A south-facing wall is often agood option. Placing theproduct in alocation shaded by
buildings, trees, walls, etc. will reduce theability of thesolar panel to charge thebattery.
• If theproduct is not used for along time, thebattery may become so discharged that
theLED light does not come on. In this case theproduct must be left in bright sunlight for
10–20 hours to charge. The battery will charge regardless of which operating mode it is in,
but will charge quicker if set to OFF.
• Angle/tilt thesolar panel in such away that it can receive as much sunlight as possible.
For optimum operation:
• In order to prevent thelight from being activated inadvertently it should be placed in
aposition in which it will not be affected by heat sources such as barbecues or air
conditioning units.
• The motion sensor might also be sensitive to passing traffic, ventilation systems or sources
of electromagnetic interference such as transformers.
• Do not place thewall light so that its motion sensor is aimed towards any reflective surfaces
such as large glass surfaces, pools or smooth white walls. These surfaces can reflect
movement which will give false readings to themotion sensor and cause it to turn on
thelight inadvertently.
• Do not install thewall light too high or too low. The recommended installation height is 1.8 m.
• The motion sensor works best for detecting movement passing across it. Movements
directly towards or away from themotion sensor are harder to detect.
