Northern NTH-LED18 Manuale utente

LED18 / LED22

18.5” and 21.5” Widescreen LED Security Monitors

Rev. 100214

3625 Cincinnati Avenue, Rocklin, CA 95765

♦

855-388-7422

♦

www.northernvideo.com

USER GUIDE

SAFETY ……………………………………………………………….………………………………….………………..…….2

CAUTIONS…………………………………………………………………………………………...…….…………………….3

FCC RF INTERFERENCE STATEMENT …………………………………….………….………………...………………...3

CONNECTING WITH EXTERNAL EQUIPMENT……………………………..…………..……………….……………….. 4

CONTROLS AND FUNCTIONS……………………………………………..………..………………………..….……...... 5-7

MOUNTING GUIDE ……………………………………………………………..……….……………...……….……..……..8

ACCESSORIES …………………………………………………………………………………………..…………………….8

POWER INDICATOR……………………………………………………………………………………….…………………..9

DIMENSIONS …………………………………………………………………………………………….……………………..9

SPECIFICATIONS…………………………………………………………………….……………...…………………..……10

1. Read these instructions completely and comply with all requirements.

2. Retain these instructions for reference.

3. Comply with all instructions and warnings, both in this manual and on the product.

4. Disconnect the monitor from all power before cleaning. Use a damp cloth for cleaning; and do not use liquid or

aerosol cleaners.

5. Never use the monitor in damp areas or near water.

6. Never place the monitor on an unstable surface; if the monitor falls it may cause serious damage to people or

property.

7. When selecting a location for placement/installation please insure:

A. To allow for sufficient ventilation leave a minimum distance of 4” around the monitor.

B. Never allow anything (e.g. paper, cloth, etc.) to obstruct the monitor ventilation openings.

C. Never allow an open flame source (e.g. lighted candles) near the monitor.

D. If batteries are used, please dispose of all batteries as per local regulations.

E. Use the monitor in indoor environments as per the temperature and humidity specs.

8. The monitor should be operated from a power source indicated on the rear of the monitor. If you are not sure of the

type of power available, consult a licensed electrician.

9. The 3 wire grounding type plug [having a third (grounding) pin] used on this monitor is a safety feature. Do not

power the monitor without the a grounding-type plug. If you are unable to insert the 3 wire plug into the outlet,

contact your electrician to update the outlet.

10. Do not place the monitor where people will walk on the cord or allow anything to rest on or rub against the power

cord.

11. If an extension cord is used to power the monitor, make sure that the total ampere usage of all the products plugged

into the extension cord does not exceed the ampere rating of the extension cord nor the power rating of the outlet.

12. To avoid the risk of fire or an electric shock resulting from contact with dangerous voltage points or damage to parts,

never insert objects of any kind into the monitor cabinet slots. Never spill any kind of liquid on the monitor.

13. Do not attempt to service this monitor yourself, as opening or removing the cover may expose you to dangerous

voltage points or other risks. Refer all servicing to trained personnel.

14. If any of the following occur, disconnect the power to the monitor and refer servicing to qualified service personnel:

Contents

Safety

A. When the power cord or plug is damaged or frayed.

B. If liquid has been spilled into the monitor.

C. If the monitor has been exposed to rain, water or other liquids.

D. If the monitor does not operate as expected as per the operating instructions. Adjust only those controls as de-

scribed in the operating instructions; improper adjustment of other controls may cause the monitor to become inop-

erative and may void the warranty.

E. If the monitor has been dropped or the cabinet has been damaged.

F. If the monitor exhibits a distinct change in performance, indicating a need for service.

PLEASE NOTE:k

The power supply cord is used as the main disconnect device. Ensure that the power outlet is located/installed near the

monitor and is easily accessible.

▶NEVER REMOVE THE BACK COVER

Only specially qualified personnel should remove the back cover.

▶DO NOT USE IN ENVIRONMENTS THAT MAY CAUSE HAZARDS

To prevent electrical shock or a fire hazard, do not expose the monitor to rain or moisture. This monitor is designed to

be used in the a residential or commercial environment. Do not subject the monitor to excessive vibration or dust, or to

corrosive gases.

▶KEEP IN A WELL VENTILATED LOCATION

Ventilation slots are provided on the cabinet to control the internal temperature of the monitor. Do not cover these ven-

tilation holes or place anything on the unit which might block those slots.

▶AVOID EXCESSIVE HEAT

Avoid placing the monitor in direct sunshine or near a heating appliance.

▶TO ELIMINATE EYE FATIGUE

Do not use the monitor against a bright back ground or where sunlight and other light sources will shine directly on the

monitor.

▶BE CAREFUL OF HEAVY OBJECTS

Neither the monitor itself nor any other heavy object should rest on the power cord. Damage to a power cord can cause

fire or electrical shock.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that in-

terference will not occur in a particular installation.

If this equipment causes harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

Cautions

FCC RF Interference Statement

- Reorient or relocate the receiving antenna.

- Increase the space between the equipment and receiver.

- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

- Consult the dealer, an experienced radio, or a TV technician for help.

- Only a shielded interface cable should be used.

Finally, any changes or modications to the equipment by the user not expressly approved by the grantee or

manufacturer could void the user's authority to operate such equipment.

DOC COMPLIANCE NOTICE

This digital apparatus does not exceed the Class A limit for radio noise emissions from digital apparatus set out in the

radio interference regulation of Canadian Department of Communications.

CE COMPLIANCE

This monitor complies with the basic protection requirements of the Electromagnetic Compatibility (EMC) Directive

2004/108/EC for electrical and electronic equipment imported into the European Union (EU):

The electromagnetic disturbance generated by the apparatus does not exceed the level specied in the harmonized

EMC Standards for this type of apparatus. It has a level of immunity to the electromagnetic disturbance to be expected in

its intended use, and should operate without unacceptable degradation of its specied performance.

Back View of Monitor

Connector Panel is located on the underside of the case rear

projection, just above the stand

Use ONLY a properly grounded three wire cord appropriate for the

local power system.

Connecons

HDMIBNC 2

OUT

BNC 2

BNC 1

AUDIO

OUT

AUDIO

AC IN VGA

CONTROL KEYS/BUTTONS

Buttons are located on the right side of the bezel.

To change the input selection, press SOURCE to display the pop-up

menu, use up/down to highlight the desired source, then press

ENTER to complete the selection.

To verify the current input selection, press SOURCE to display the

pop-up, then press SOURCE again to dismiss the pop-up.

For One Touch Instant Scaling between 16:9 and 4:3 aspect ratio,

press Up or Down buttons when no menus are displayed.

To close any OSD window, press SOURCE twice.

1. Image Parameters

The PICTURE menu is for adjusting the image appearance. The Picture menu is for BNC. PICTURE menu op-

tions differ for VGA. Depending on HDMI signal format, either PICTURE menu form may be displayed.

A. PICTURE Menu (BNC, & some HDMI)

Press the MENU button to bring the menu on screen, and

then the up/down buttons to move up along the main menu

selections to choose the PICTURE menu. Press the MENU

button to move between the left side main menu selector into

the window of menu choices and parameters.

Use the up & down buttons to move the yellow highlighted

sub-menu selection within the sub-menu. Pressing the right +

& left - buttons will adjust the value of the highlighted item.

Press the MENU button to exit the sub-menu and return to

the main menu selector.

To exit the menu system, press the SOURCE button twice. Settings will remain as they appear on screen.

Adjustments

Contrast: Adjusts the range of difference between light and dark areas of the picture.

Brightness: Adjusts the overall picture intensity.

Hue: Increase or decrease the red/green/blue tint of the image.

Saturation: Increase or decrease the intensity of (mix of white with) colors in the image.

Sharpness: Change the balance between image detail (Resolution) and degree of transition between areas of differing

brightness (Acutance).

Color Temp: Adjust color reproduction: choose between normal, warm (more red) & cool (more blue) to achieve the

best visual result.

Scale: Choose between SD 4:3 and HD 16:9 aspect ratio. If analog images appear „stretched‟ use 4:3 scaling.

Picture Overscan: Choose between legacy CRT-type cropping of picture edges (On) or display of entire image without

cropping (Off). Note: HDMI recognizes multiple signal types; for some types of HDMI signals Overscan is disabled.

Picture Mode: Choose from Standard/Movie/Vivid/User for most pleasing image based on ambient light. User mode

Controls & Menu Operation

stores custom adjustments to contrast/brightness/hue/

saturation/sharpness.

B. Picture Menu for VGA and some HDMI

Adjustments

Contrast: Adjusts the contrast between light and dark areas of

the picture.

Brightness: Adjusts the overall picture shade and brightness.

Color Temp: To adjust color reproduction choose between

normal, warm (more red) & cool (more blue).

Scale: Choose between SD 4:3 and HD 16:9 aspect ratio (can

also be controlled using „one touch instant scaling‟ function).

2. AUDIO MENU

Press the MENU button to bring the menu on screen, and then

up/down buttons to move along the menu selections to highlight

the AUDIO menu. Press MENU again to move between the left

side main menu selector into the window of menu choices and

parameters.

Use the up & down buttons to move the yellow highlighted sub-

menu selection within the sub-menu. Pressing the right + & left -

buttons will adjust the value of the highlighted item. Press the

MENU button to exit the sub-menu and return to the main menu

selector.

To exit the menu system, press the SOURCE button twice.

Adjustments

Bass: Boost/limit low frequency tones.

Treble: Boost/limit high frequency tones.

Balance: Change relative volume between left and right speakers.

3. OSD Menu

Press the MENU button to bring the menu on screen, and then up/down buttons to move along the menu selections to

highlight the OSD menu. Press MENU again to move

between the left side main menu selector into the window

of menu choices and parameters.

Use the up & down buttons to move the yellow highlighted

sub-menu selection within the sub-menu. Pressing the

right + & left - buttons will adjust the value of the high-

lighted item. Press the MENU button to exit the sub-menu

and return to the main menu selector.

To exit the menu system, press the SOURCE button

twice.

Adjustments

Language: Choose OSD display language from English/Chinese/German/French/Spanish/Italian.

H-Position: OSD horizontal position on the screen.

V-Position: OSD vertical position on screen.

Duration: OSD Menu timeout.

Halftone: OSD Menu background opacity (allows viewing of the video behind the OSD menu).

Reset Defaults: Restore monitor to factory default settings.

Version: Displays firmware version number (not adjustable).

4. FUNCTION/GEOMETRY MENU

The HDMI, and BNC inputs share the FUNCTION menu. The VGA menu is labeled GEOMETRY

A. FUNCTION Menu

Press the MENU button to bring the menu on screen, and then up/down

buttons to move along the menu selections to highlight the FUNCTION

menu. Press MENU again to move between the left side main menu se-

lector into the window of menu choices and parameters.

Use the up & down buttons to move the yellow highlighted sub-menu se-

lection within the sub-menu. Pressing the right + & left - buttons will ad-

just the value of the highlighted item. Press the MENU button to exit the

sub-menu and return to the main menu selector.

To exit the menu system, press the SOURCE button twice.

Adjustments

DLC: Dynamic Light Control On/Off Limits the brightness/contrast ratio extremes in on screen video.

B. GEOMETRY Menu (VGA Only) Press the MENU button to bring the menu on screen, and then up/down buttons to

move along the menu selections to highlight the GEOMETRY menu. Press MENU again to move between the left side

main menu selector into the window of menu choices and parameters. Use the up & down buttons to move the yellow

highlighted sub-menu selection within the sub-menu. Pressing the right + & left - buttons will adjust the value of the high-

lighted item. Press the MENU button to exit the sub-menu and

return to the main menu selector. To exit the menu system, press

the SOURCE button twice.

Adjustments

H-Position: Image Horizontal position

V-Position: Image Vertical position

Clock: Relative adjustment of horizontal scan rate

Phase: Relative adjustment of synch

Auto Adjust: Press Vol+/Right button to automatically adjust

settings to match input signal parameters

CAUTION:The wall mount must bear a minimum of five times the monitor‟s net weight. To mount your MONITOR to

the wall or another surface, you need to purchase a VESA wall mount. Use four M4 x 8mm screws (the base attachment

screws removed in step 1 below are M4 x 8mm) to attach the mount. The monitor mount VESA hole pattern is 100mm x

100mm. Note: Metric (M4 x 8 mm) is the type screw that should be used (do not use longer screws or the monitor may

be damaged).

1. Before mounting the monitor, remove the base riser

(vertical portion of the base) by removing the four screws

near the top with a screwdriver. Then the base and the

riser can be removed. In order to prevent losing these

screws, we suggest replacing the screws in their original

holes.

2. Attach the VESA mount (100mm x 100mm) plate to

the rear of the monitor and follow all of the instructions

provided with the mount to complete the mounting process.

Power Cord HDMI Cable VGA Cable Audio Cable User Guide

Mounting Guide

Accessories

LED INDICATOR

LED is off when power is off; LED glows green when power is on. The power management feature of the monitor is

designed for security surveillance applications. When there is no video, the monitor remains ON to be instantly ready

to display video when the source is changed or if a PC changes state from sleep/standby to active mode. A floating

“No Signal” box moves slowly

across the screen until video is re-

stored.

Power Indicator/Modes of Operation

Model: NTH-LED18 NTH-LED22

Letter Dimension mm inch mm inch

A Width of monitor body 452.1 17.80 516.6 20.34

B Height of monitor body 280.3 11.04 316.7 12.47

C Depth of monitor body 50.9 2.00 51.2 2.02

D Height of monitor on base 341.0 13.42 376.1 14.81

E Width of base 260.0 10.23 260.0 10.23

F Depth of base 185.0 7.28 185.0 7.28

G Width of viewable area 422.5 16.63 477.8 18.81

H Height of viewable area 243.1 9.57 269.3 10.60

I Thickness of monitor 19.5 0.77 19.5 0.77

J Bottom bezel width 20.6 0.81 25.4 1.00

K Side bezel width 14.8 0.58 19.4 0.76

Dimensions

Specification subject to change without notice for quality improvements, we are not responsible for misprints.

Specifications

Model NTH-LED18 NTH-LED22

Screen diagonal dimension

(inches) 18.5 21.5

Viewable area W x H (inches) 16.63 x 9.57 18.81 x 10.60

Led Type RGB

Pixel Pitch (mm) 0.28 0.248

Screen Maximum Resolution 1360x768 1920x1080

Supported Panel

Display Resolutions

720x400; 640x480; 800x600; 1024x768;

1280x1024; 1360x768

720x400; 640x480; 800x600; 1024x768; 1280x1024;

1360x768; 1440x900; 1600x900; 1680x1050;

1920x1080

Supported Input Resolutions

720x400; 640x480; 800x600; 1024x768;

1280x1024; 1360x768

1920x1080 (scaled)

720x400; 640x480; 800x600; 1024x768; 1280x1024;

1360x768; 1440x900; 1600x900; 1680x1050;

1920x1080

Refresh Rate (Vertical Fre-

quency) 60, 70, 72.2, 72.8, 75 Hz depending on resolution

Color Depth Over 16 million colors

Brightness 250 CD/m2

Auto Adjust Yes

Monitor Aspect Ratio 16 : 9

Display Aspect Ratio Selectable 16:9 or 4:3 in OSD or by One Touch Instant Scaling using up/down buttons when no menus on screen

Horizontal TV Lines 720 1080

Contrast Ratio 2000 : 1

Response Time (ms) 5

View Angle H/V (degrees) 170/160

Digital Video Inputs HDMI up to 1920x1080

Analog Video In/Out HD VGA in up to 1920x1080

SD 1x BNC Input / 1x BNC Input with Looping BNC Output

Audio inputs (stereo) 1x 3.5mm mini-jack

Audio output/headphone jack

(stereo) 1x 3.5mm mini-jack; output active for inputs from both analog and HDMI digital audio

Speakers Two –built in 2.7” x 1.2” oval type

Audio Amplifier 1 Watt/Channel

Filter type 3D Comb Filter

De-Interlace

& Noise Reduction 3D De-Interlace

OSD Languages English, Chinese, German, French, Spanish, Italian

Monitor Body Dimensions (W

x Lx D) 17.80 x 11.04 x 2.00 20.34 x 12.47 x 2.02

Max Dimensions Monitor +

Stand (inches) 17.8 x 13.42 x 7.28 20.34 x 14.81 x 7.28

Panel Surface Matte finish

Case & Stand Material Plastic

VESA Mounting Pattern 100x100; location centered on monitor body

Base/Stand included Yes

Base Tilt Angle +15°~-10°

Weight Cabinet only (lb.) 4.63 5.73

Weight Cabinet + Base Stand

(lb.) 5.51 8.75

Power-Watts (on and standby) < 20W < 30W

Power Input 100~240VAC (detachable USA line cord provided)

Operating Temperature 32⁰~104⁰F

Storage Temperature -4⁰~140⁰F

Operating Humidity 10~85%

Accessories Power cord, 3.5mm stereo audio cable, VGA cable, HDMI cable, users guide

Certifications UL. ULC, CE, FCC, HDMI Forum

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Northern Monitor

Northern

Northern LED17ST Manuale utente

Northern

Northern LED284K Manuale utente

Northern

Northern LED32 Manuale utente

Northern

Northern LED10 Manuale utente

Northern

Northern LED22PC Manuale utente

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione