NOTHERN NTH-PTZOD27X Manuale utente

PTZODSeries

960HModule/ 700LineResolution 27X&37XOutdoorPTZ

Version 1.0

NTH-PTZOD27X / NTH-PTZOD37X

Please read this operation manual carefully

before installing and using this unit

CAUTl0N

RISK OF ELECTRIC

SHOCK DO NOT OPEN

CAUTION：To reduce the risk of electrical shock, do not open covers.

No user serviceable parts inside.

Refer servicing to qualified service personal.

This lightning flash with arrowhead symbol is intended to alert the user to the

presence of un-insulated "dangerous voltage" within the product's enclosure that

may be of sufficient magnitude to constitute a risk of electric shock to persons.

This exclamation point symbol is intended to alert the user to the presence of

important operating and maintenance (servicing) instructions in the literature

accompanying the appliance.

WARNING：To prevent the risk of fire or electric shock hazard do not expose

Internal components of this camera to rain or moisture.

▌▌Important Safeguard

1. Read Instructions

Read all of the safety and operating instructions before using the product.

2. Retain Instructions

Save these instructions for future reference.

3. Attachments／Accessories

Do not use attachments or accessories unless recommended by the manufacturer as they may

cause hazards, damage to the product and void warranty.

4. Water and Moisture

Do not expose internal components to water or moisture.

5. Installation

Do not place or mount this product in or on an unstable or improperly supported location. Improperly

installed product may fall, causing serious injury to persons and damage to the product. Use only

with a mounting device recommended by the manufacturer, or sold with the product. To insure

proper mounting, follow the manufacturer’s instructions and use only mounting accessories

recommended by manufacturer.

6. Power source

This product should be operated only from the type of power source indicated on the label.

▌▌Precautions

Operating

Before using, make sure power supply and others are properly connected.

While operating, if any abnormal condition or malfunction is observed stop using the camera

immediately and contact a qualified technician.

Handling

Do not disassemble or tamper with parts inside the camera.

Do not drop or subject the camera to shock and/ or vibration as this can damage the camera.

Care must be taken when you clean the clear dome cover. Scratches and dust will ruin your quality

of your picture.

Installation and Storage

Do not install the camera in areas of extreme temperature, which exceed the allowable range.

Avoid installing in humid or dusty places.

Avoid installing in places where radiation is present.

Avoid installing in places where there are strong magnetic fields and electric signals.

Avoid installing in places where the camera would be subject to strong vibrations.

Never expose internal components of the camera to rain and water.

1. Introduction

Features

Product and Accessories

2. Installation Guide

Preparations

Installation Method

Installation Dimensions

3. Dome Setting

DIP Switch Setup

Cabling

Check Points Before Operation

Reserved Preset

OSD Menu Functions

4. How to use OSD Menu

Language

System Information

Display Setup

Dome Settings

Camera

Motion

Restart

Factory Default

5. Specifications

Specifications

Optional Bracket

█

█▐

▐

▌

▌█

█

▌▌Camera Specifications

CCD Sensor: 1 / 4 " Interline Transfer CCD

Camera Support: SCM-2273 (SAMSUNG)

Zoom Magnification: x 27 Optical Zoom, x 16 Digital Zoom

Camera Support: SCM-2373 (SAMSUNG)

Zoom Magnification: x 37 Optical Zoom, x 16 Digital Zoom

Day & Night Function

Various Focus Mode: Auto-Focus / Manual Focus / Semi-Auto Focus.

Independent and Simultaneous Camera Characteristic Setup in Preset operation

▌▌Main Features

Step less speed changes, auto zoom/speed matching

Pan 0.01~600o/S, Tilt 0.01o~120o/S

Timing actions for 7 days of programmable schedule

Built-in Semi-conductor heater & digital temperature sensor

PWM cooling fan vari-speed temperature control

Pan Tilt accuracy +/- 0.01o, 256 preset positions

8 cruising tracks, each cruising track has 32 presets

4 pattern tours,600sec memory, 500 programmable instructions

Multi-Protocol through RS485 or coaxial cable.

8 auto scan with use-defined left and right boundaries and settable scan speed

4 Privacy Zones with defined English camera title

Auto Compatible PELCO_P, PELCO_D compatible

Guard Location: dome will rotate back to preset position after a period of idle time

Alarm triggering: the alarm can trigger preset, auto scan, cruising and pattern tours functions

Soft Address Function: the use can set up the dome address without uninstalling the dome

▌▌Integrated Super Speed PTZ Rotator

Delicate stepping motor, stable, sensitive and accurate

360°Pan and 90°Tilt range (auto-flip) without blind area

Stepless speed change, auto zoom/speed matching

▌▌All-weather Outdoor Design

High die-cast alloy aluminum construction

High Precision Mould with low heat conductivity

Fully enclosed isolation design for heat sink

Nanometer Dustproof, waterproof and fog-proof lens

IP66 Weatherproof

3000V lightning and surge current protection

▌▌Function Instructions

Focus / PTZ Speed Auto Match

The pan/tilt rotation speed is adjusted automatically according to the zoom in/out speed, which

makes it much more practical for manual target tracking. (Only for the auto tracking IR speed dome)

Power Up Action

This function resumes the last action executed before power down. Most of

actions such as Preset, Pattern, Swing and Group are available for this function.

Auto Flip

When the camera tilts downward and goes just beyond the vertical position, the camera will rotate

180 degrees to provide a correctly oriented picture.

Preset Position Set up and Call Up

In the Preset function the dome stores the current pan/tilt angle, zoom and other position parameters

in its memory. When necessary the dome recalls these parameters and adjusts the camera to a

particular position. The user can store, recall and clear the presets easily and promptly by using the

keyboard controller. The dome can store up to 220 presets.

Auto Scan

Users can set up the left and right boundaries by control keyboard. Then speed

dome can scan between these boundaries and supports up to 8 groups of scanning paths.

Cruising Track

The preset position can be programmed to be recalled in a set of sequences. This sequence can be

set to let the camera scan from one position to the next in a cycle at a set speed. This feature is

called the “auto cruise”. The cruise sequence and dwell time of each preset can be set. It supports

up to 8 cruising tracks, each cruising track with 32 presets.

Pattern Tour

Dome can memorize 600s running paths or 500 programmable instructions. When starting the

pattern tour, speed dome will move automatically according the recorded action path. It supports 4

groups of pattern tours.

Guard Location

The dome will automatically return to a preset position if there is no operation over a period of time.

Default Action

When you start up the dome camera or the camera does not receive commands over a long period

of time it will return to default functions which includes the home place, auto pan, auto cruise and

pattern.

Dome Address Setup

The dome supports up to 256 addresses and the dome will only respond to the instructions given to

its own address. Please check the dip switch on the dome for address setup.

Manual Object Tracking

The use can move the joystick up, down, left or right to track the object in the screen and use the

joystick to zoom in and out with auto focus.

Privacy Mask Protection

Set black mask areas to protect the privacy zones. The black privacy locations can be set, and

support up to 4 mask zones.

Timing Running Function

Users can set speed dome operation tasks at total 8 timing areas during 7 days.

Coordinates and Directions Display

User can define the dome’s direction of due north, which will help to show the exact moving

directions on screen. Zone title is also supported and will display when the dome moves to the

specified zone.

Motion Detection

The dome will detect the changes in the defined video zone and trigger alarm.

It supports to 8 video Locations, each with 4 detection zones.

PTZ and Lens Control

Zoom Control

Users can control zoom by keyboard to get near or far images.

Focus Control

The default setting is auto focus. The camera will auto focus based on the center of the video

display to achieve a clear image.

Auto Iris Control

Auto Iris detects the environmental lighting condition and adjusts the iris to get the correct

brightness of the image.

Auto Back Light Compensation

In a highly bright background situation, auto back light compensation function compensates for

the brightness of the dark object and adjust the background brightness to get a clear image.

Auto/Manual White Balance

Auto/Manual WB adjusts depending on the environment light changes.

Day and Night Switch

Speed dome can automatically switch according to the environmental illumination changes.

OSD Setup (Only for camera with menu)

Call upon preset No.95 to enter into OSD menu setup interface. Press “Focus” to choose

menu items and press “Iris” to set menu contents.

Information such as Camera ID, temperature, Pan/Tilt Angle, Alarm Input and Preset can be

displayed on screen.

I/O Functions (for Advance Type)

Alarm sensor Input is decoupled with photo coupler. Using the dry contact for alarm input and output,

if an external sensor is activated, camera can be set to move to the corresponding Preset position.

Reserved Presets for Special Purpose

Most camera characteristics can be set up easily and directly with reserved preset, not entering

into OSD menu. For more information, refer to “Reserved Preset” in this manual.

▌▌Product & Accessories

NTH-PTZOD27X / NTH-PTZOD37X

Accessories:

User’s Manual Anti-drop Rope

Gloves,Screwdriver & Allen Wrench AC24V/2A Power Supply

█

█▐

▐

▌

▌█

█

▌▌Preparations

Basic Requirements

All the electric work must be finished under the latest electric & fire prevention law and rules (and

any related law and rules). Please check the packing list and verify every accessory is included.

Please contact us for any help during the installation.

Installation Space Checkup

Please make sure there is adequate space for installing this dome. Be sure the mounting site

material is sufficient enough and will hold the total weight of the dome and its accessories.

Cable Preparation

Please choose the proper cable according to the transmission distance. The minimum requirement

of coaxial BNC cable is listed as follows for reference:

Models

Max Distance（Feet\Meter）

RG59/U

750ft(229m)

RG61/U

1,000ft(305m)

RG11/U

1,500ft(457m)

Setup for Dome Address

The domes address and baud rate can be set up using two methods: “Traditional Dipswitch Method”

and via the “Soft Address Method” which utilizes the OSD to set up the dome address and baud

rates.

Dipswitch Settings: To set up the dome using Dipswitches you will first need to remove the

plastic shroud around the PTZ module. There are 4 screws which hold this shroud in place. It is

recommended to set the dipswitches prior to installing the dome.

*See pages 12-14 for further dipswitch setup instructions.

Soft Address: The soft address method also can be used to set the dome address and baud rate

without using the dipswitches. This method can be used after the dome has been installed. This

feature is very useful when needing to change address or baud rates after the dome has been

installed.

※

See page 30 for further soft address setup instructions.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali NOTHERN Telecamera di sicurezza

NOTHERN

NOTHERN TVIMDIR120 Istruzioni per il montaggio

NOTHERN

NOTHERN TVIBIR65 Manuale utente

NOTHERN

NOTHERN TVIEIR60 Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente