Notilo Plus Seasam Manuale utente
Quick Start Guide Seasam
with OCULUS Camera
December 2022
Content
I - OCULUS CAMERA INSTALLATION
●Installation of the Oculus Camera
II - STARTING UP
●Connecting the battery
●Connecting the WiFi Reel to the drone
●Starting up the equipment
●Connecting to the WiFi Reel
○Delivery after September 2021
○Delivery before September 2021
●Choice of configuration
●Checking the connections
III - SET UP THE APPS
●Set up Seasam Control app to use the Oculus Camera
●Start the Oculus App
●At the end of the exploration
I - OCULUS
CAMERA
INSTALLATION
Installation of the Orphie Camera
I - OCULUS CAMERA INSTALLATION
Required Equipment
●Drone
●Sensor Network or Sensor Hub
●Structure with Oculus Camera
4
Secure the plugs of the connectors together to prevent them
from catching on anything else during operation
The battery must not be connected to the drone during this step.
5
I - OCULUS CAMERA INSTALLATION
Installation of the Oculus Camera
Sensor Network
Connect the Oculus camera to
the Sensor Network by
connecting the camera cable
to the Sensor Network
connector.
Sensor Hub
Connect the sensor hub to the
remote cable from the drone.
The Oculus camera is already
connected to the sensor hub.
Make sure the structure is properly
secured to the drone to prevent it from
moving during operation.
Place the structure on the drone
●Engage the structure on the 2 ball joints of the drone.
●Lower the front of the frame onto the drone.
●Press the red button on the front of the structure
●Engage the structure on the clip previously installed on the drone
6
I - OCULUS CAMERA INSTALLATION
Installation of the Oculus Camera
The battery must not be connected to the drone during this step.
II - STARTING UP
THE DRONE
Connecting the battery
Make sure the battery compartment is properly closed.
Use the dedicated tool.
Ensure that the emergency stop on the underside of the drone is
properly inserted.
Make sure that the safety guide is aligned in the right direction
II - STARTING UP THE DRONE
8
Turn the drone over and place it on the structure.
Be careful not to damage the camera.
Connecting the WiFi reel to the drone
Attach and lock the carabiner on the
structure to secure the Drone
Standard Connector
Subconn Connector
II - STARTING UP THE DRONE
9
Starting up the equipment
Press the "On" button once. After
several seconds the LED flashes
quickly blue
Place the magnet on the "Power" icon on top of the drone.
The drone will turn on and test all its components. It will make
sounds and activate its lights.
Make sure that nothing is in the way and that the motors are
not jammed.
When this process is complete, the green front LED will be solid.
Turn on the controller.
II - STARTING UP THE DRONE
10
Altri manuali per Seasam
4
Altri manuali Notilo Plus Drone
