http://stores.ebay.com/elecrealm/
1 / 28
Content
Chapter 1--LVDS Cable Connection ......................................... 2
Chapter 2--Voltage Jumper........................................................ 5
Chapter 3--Refresh firmware..................................................... 6
Chapter 4--Enter into Factory Mode and set LVDS Map number
................................................................................................ 11
Chapter 5--Mirror the image upside down............................... 18
Chapter 6--Change the input source via remote controller....... 20
Chapter 7--Change the input source via keyboard ................... 22
Chapter 8--Troubleshooting..................................................... 26
