NovaFlex NF-S3i-RC-D Manuale utente
800.595.6302 novaexled.com |01Specications are subject to change without notice.
Product Code: NF-S3i-RC-D
Data
Output Signal RF Signal
Power Source 3V (CR2032) Battery
(included)
Power Consumption 10 mA
Operating Temperature 32° - 104° F
Relative Humidity 8 - 80%
Wireless Range 50 ft
Dimming Range 0 - 100%
Dimensions
Features
• Controls static
color dimming
• Controls 1 zone
• Glass interface
• Rotation sensitive
• Fits in standard US
switch box
• Smart, simple,
seamless integration
S3iCONTROLLER ROTARY DIAL
V- V+
2.95 in
4.72 in
3.27 in
2.58 in
0.76 in
800.595.6302 nova exled.com |01Specifi cations are subject to change without notice.
Data
Input Voltage 12 - 36 VDC
Output Current 4 x 5 A
Output Power 240 - 720W
S3iWIRELESS RECEIVER
Product Code: NF-S3i-WR-1009
Use one receiver per zone, up to 6 zones depending on the
controller selected. Pair with NF-A-UNV for large projects.
Dimensions
white
1234
wwcwwwcw
white
1234
wwcwwwcw
Learning Key
Pair - Click the “Learning Key” button on top of the device once.
Then follow the pairing instructions for your controller.
Unpair ALL Remotes Option 1
Hold the “Learning Key” button on top of the device for about 4
seconds (lights should ash)
Unpair ALL Remotes Option 2
(Lights ON) Unplug and Plug In receiver (5) times in a row
(make sure when you plug in for those (5) times, the light
comes on rst before you unplug again)
Primary / Secondary - Color Changing Synchronization throughout multiple NF-S3i-WC-1009 Receivers (ONLY “Play/Pause” Scenes
can achieve)
Locate small BLACK CAP located on 2 pins sticking upward on the Power Side of the NF-S3i-WC-1009. This piece will set the PRIMARY.
Relocate the CAP so that it covers BOTH Pins and Slide the CAP to the bottom. For the SECONDARY Receivers, Remove the CAP
completely. Once the PRIMARY (ONLY ONE) and Secondary (as many ZONES as the Remote allows) are set, Power OFF and ON again
the PRIMARY Receiver. This will set the Primary Function.
Once the PRIMARY and SECONDARY(s) are set, Select DIFFERENT ZONES for each Receiver to be Paired. Once ZONES are Paired,
Select ZONE(s) and FIRST TURN OFF WHITE! Once WHITE is OFF, Select a Color Changing Scene and Set the preferred SPEED.
To test Synchronization, Power OFF (1) SECONDARY Run. After a few seconds, Power ON the SECONDARY Run. Wait 15 seconds for
the signal to transfer.
Pairing
Operation
7.00 in
1.81 in 0.86 in
800.595.6302 novaexled.com |02Specications are subject to change without notice.
INSTALLATION S3i ROTARY DIAL
Installation
Wiring Diagram
Protective lm on battery,
please remove before use.
SIGNAL INPUT
LED OUTPUT
DC INPUT
DC INPUT
W-
+
B-
R-
G-
G-
R-
B-
V+
W- V-V+
V-V+
white
1234
wwcwwwcw
NF-PS-HLG100W24-HW
NF-PS-HLG100W24-HW
120V AC (Line)
120V AC (Line)
Run #2
Run #1
Static Ribbon or Neon
Static Ribbon or Neon
S3iSTATIC WIRING DIAGRAM
NF-A-UNV
NF-S3i-WR-1009
800.595.6302 novaexled.com |03Specications are subject to change without notice.
OPERATION S3i ROTARY DIAL
PROJECT SUPPORT INSTALLATION GUIDES WHY NOVA FLEX RESOURCES
FOR MORE
INFORMATION
CLICK HERE
Remove plastic lm on battery saver within the controller
to operate.
Click Learning Key on the NF-S3i-WR-1009
Press the Wheel once (ash indicates pairing successful).
NOTE: The remote may be turning the lights ON or OFF when
pairing. If the light turns OFF after pairing, press the Wheel once
again to turn lights ON
On/OFF
Click the wheel to turn on, click again to turn off.
Brightness
Turn Wheel RIGHT to BRIGHTEN, Turn Wheel LEFT to DIM
Operation
white
1234
wwcwwwcw
Learning Key
Brightness
Pairing
Altri manuali NovaFlex Controllori
