Novus NV-DVR900 Manuale utente

NV-DVR900

NV-DVR900CD

NV-DVR1600

NV-DVR1600CD

U s e r ’s M a n u a l

NV-DVR900 / NV-DVR1600 ver. 2.0 - User’s Manual

2

WARNINGS AND PRECAUTIONS

WARNING!

READ, KEEP AND FOLLOW THESE INSTRUCTIONS. ALL THE SAFETY

AND OPERATING INSTRUCTIONS SHOULD BE READ BEFORE THE

PRODUCT IS OPERATED.

WARNING!

TO REDUCE THE RIS OF FIRE OR ELECTRIC SHOC , DO NOT EXPOSE THIS UNIT TO

RAIN OR MOISTURE IF THIS UNIT IS DESIGNED FOR INDOOR USE ONLY.

WARNING!

USER IS NOT ALLOWED TO DISASSEMBLY THE CASING. THERE ARE NO USER-

SERVICEABLE PARTS INSIDE THIS UNIT.

INSTALLATION AND SERVICING SHOULD ONLY BE DONE BY QUALIFIED SERVICE

PERSONNEL OF AUTHORIZED NOVUS SERVICE AND CONFORM TO ALL LOCAL CODES

WARNING!

DIGITAL VIDEO RECORDER IS ELECTROSTATIC CHARGES SENSITIVE EQUIPMENT

THEREFORE IT SHOULD BE USED IN ACCORDANCE TO OPERATING AND

MAINTENANCE RULES FOR DEVICES BASED ON CMOS/MOSFET TECHNOLOGY.

INFORMATION

This device complies with all requirements included in directives: 89/336/EEC, 93/68/EEC, 72/23/EEC

INFORMATION

Translation is based on original English user’s manual. Data included in following user’s manual is up

to date during the time of printing. Novus Security Sp z o.o. holds exclusive rights to modify this manual.

The producer reserves the rights for device specification modification and change in the design without prior

notice.

NV-DVR900 / NV-DVR1600 ver. 2.0 - User’s Manual

3

SAFEGUARDS CONDITIONS

1. Installation and servicing of

NV-

DVR900 or NV-DVR1600 should only be carried out by qualified

service personnel and conform to all local codes.

2. Do not place the Multiplexer in areas where ventilation openings might be blocked or covered.

3. There are no user-serviceable parts inside this unit. Only authorized service personnel may open the

unit. The equipment should be protected from mechanical damage and kept clean at all times.

4. Protect this device from being exposed to dust and moisture. In the event of Multiplexer direct

contact with water unplug the device immediately and contact qualified service personnel

of authorized Novus service. Dusty (soiled/dirty) equipment may be the cause of fire and / or

electrical shock.

5. Unplug the unit from the outlet before cleaning. This device can be clean only with a clean damp

cloth. Try to avoid using chemically active liquid cleaners or aerosol. In the event of strong dirt it is

allowed to use gentle cleaning lotion.

6. Power supplier wires as well as signal wires should b

e fix in the way that there is no risk

of mechanical damage, Please take extra caution not to overload the voltage on sockets and

extension cords to prevent from the risk of fire.

7. In order to prevent the unit from damage, video channel and signal wires should be equipped with

appropriate surge protection utility conforming to European Union standards. We also advice

utilizing video and data transmission protection.

8. It is not allowed to operate this device in conditions not complying with exploitation requirements

in the range of power supply, air relative humidity or air temperature..

9. Metal objects can not be put inside the device. It can cause major malfunction and/or damage the

unit. In the event of situation described above user should contact authorized Novus service

immediately.

NV-DVR900 / NV-DVR1600 ver. 2.0 - User’s Manual

4

1. FOREWORD INFORMATION ..............................................................................................6

1.1 Main characteristic ...............................................................................................................6

1.2 NV-DVR900 / NV-DVR900CD Technical Specification ...................................................7

1.3 NV-DVR1600 / NV-DVR1600CD Technical Specification ...............................................8

2. DEVICE POWER UP ................................................................................................................9

2.1 Preparing the equipment for operation ..............................................................................9

2.2 Electric connectors and other components of back panel ...............................................11

2.3 External Devices Connection ..........................................................................................12

2.4 Front Panel description ....................................................................................................13

2.5 Device Power On/Off .....................................................................................................17

3. MULTIPLEXER MENU .........................................................................................................18

3.1 Camera Settings ................................................................................................................19

3.1.1 Camera Control ......................................................................................................19

3.1.2 Camera Setup ..........................................................................................................20

3.1.3 PTZ Settings ............................................................................................................22

3.1.4 Alarm Presets ..........................................................................................................23

3.1.5 Video Format .........................................................................................................23

3.2 Recording .........................................................................................................................24

3.2.1 Recording Schedule ................................................................................................24

3.2.2 Motion detection .....................................................................................................25

3.2.3 Manual recording ....................................................................................................27

3.3 Sensor / Alarm Setup .......................................................................... .............................28

3.3.1 Sensor Name ...........................................................................................................28

3.3.2 Alarm Link Setup ....................................................................................................29

3.4 User Define Screen ...........................................................................................................31

3.5 Audio Setup ......................................................................................................................32

3.6 Menu Setup .......................................................................................................................33

3.7 System Setup ....................................................................................................................34

3.7.1 Log View ................................................................................................................34

3.7.2 HDD Management .................................................................................................36

3.7.3 HDD Backup ..........................................................................................................39

3.7.4 Auto Select .............................................................................................................40

3.7.5 Video Output ..........................................................................................................41

3.7.6 Administration ........................................................................................................42

3.7.6.1 Network Setup ...........................................................................................43

3.7.6.2 Date / Time Setup ......................................................................................44

3.7.6.3 Password Administration ...........................................................................44

3.7.6.4 Web Password ...........................................................................................46

3.7.6.5 Update Program .........................................................................................47

3.7.6.6 Covert Channel Selection ..........................................................................47

3.7.6.7 Mail Notification Setup .............................................................................48

3.7.7 Configuration Setup ...............................................................................................50

3.7.8 eypad Setup .........................................................................................................51

3.7.9 About System .........................................................................................................51

4. SCHEDULE PROGRAMMING ............................................................................................52

TABLE OF CONTENTS

NV-DVR900 / NV-DVR1600 ver. 2.0 - User’s Manual

5

. PLAYBACK .............................................................................................................................57

5.1 Normal Recordings Playback ..........................................................................................57

5.2 Backup Recordings Playback ...........................................................................................59

5.2.1 Backup HDD Playback ..........................................................................................59

5.2.2 Backup CD Recordings Playback ..........................................................................60

5.3 Event Recordings Playback ..............................................................................................61

6. BACKUP ..................................................................................................................................62

6.1 Single image backup via USB port

............................................................................................62

6.2

Swappable HDD Backup

.............................................................................................................63

6.3

HDD backup via USB port

..........................................................................................................64

6.4

HDD backup via FireWire port .........................................................................................65

6.5

CD Backup

..................................................................................................................................... 66

7. ADDITIONAL HDDs CONNECTING .................................................................................67

7.1 Installing the HDD in the swappable bay ........................................................................67

7.2 USB HDD connecting

................................................................................................................. 67

7.3 IEEE1394 (FireWire) HDD connecting

....................................................................................68

8. PTZ MODE ..............................................................................................................................69

8.1 Novus and Pelco speed dome cameras controlling ............................................................69

8.2 Required menu settings .....................................................................................................71

8.3 Camera controlling ...........................................................................................................72

8.3.1 Controlling by means front panel buttons ................................................................72

8.3.2 Controlling by means IR Remote ............................................................................74

9. ALARM CONNECTIONS ......................................................................................................75

10. DVR OPERATION USING REMOTE CONTROL ............................................................77

11. TCP / IP NETWORK CONNECTIONS .................................................................................79

11.1 PC hardware and software requirements ........................................................................79

11.2 Live page ........................................................................................................................80

11.3 Playback page .................................................................................................................81

APPENDIX 1 - NV-DVR900 RECORDING RATE ...................................................................................82

APPENDIX 2 - NV-DVR1600 RECORDING RATE .................................................................................83

APPENDIX 3 - NV-DVR900 RECORDING TIME ...................................................................................84

APPENDIX 4 - NV-DVR1600 RECORDING TIME ..................................................................................85

TABLE OF CONTENTS

NV-DVR900 / NV-DVR1600 ver. 2.0 - User’s Manual

6

1. FOREWORD INFORMATION

Digital Multiplexer NV-DVR900 (9 channels) and NV-DVR1600 (16 channels) was specifically

designed to work in CCTV surveillance systems. This devices incorporate the advantages of digital

image recording with the simplicity of installation and operation of time lapse recorders. This devise

utilizes very effective compression method Wavelet, ensuring high quality, detailed images. This

devices provide function of high quality image recording over long periods of time. This series

of Multiplexer feature flexible adjustment of recording settings depending on individual system

requirements. This devices are also available in versions NV-DVR900CD and NV-DVR1600CD

with built in CD writers.

The ability to connect external devices to Multiplexer provides wide range of data backup options

and additionally the overall CCTV system functionality can be improved.

1.1 Main characteristic.

 User friendly interface, with functions known from analog Multiplexers.

 Convenient to use Shuttle / Jog system for data search.

 The simplicity and convenience of using HDD instead of video tapes.

 Immediate access to required stored material through advanced search functions.

 Multilanguage OSD (On Screen Display) System Menu .

 Multilevel user access and password protection system.

 Remote Multiplexer control, image viewing and PTZ operation over Ethernet network (TCP/IP).

 Pre/Post Alarm Function.

 Wavelet compression algorithm with adjustable image quality settings.

 Recording speed of 100 fields per second.

 Schedule recording featuring integration of different recording modes.

 RS-485 communication port for PTZ cameras remote control.

 One real time audio channel recording.

 Simultaneous real time display of all channels.

 Adjustable resolution and recording speed defined individually for each camera and for different

recording modes.

 Data backup option utilizing swappable drive, CD (depending on device version) or USB storing

devices.

FOREWORD INFORMATION

NV-DVR900 / NV-DVR1600 ver. 2.0 - User’s Manual

7

1.2. NV-DVR900 / NV-DVR900CD Technical Specification

Operation Mode: Quadroplex (simultaneous recording, live display, data playback and network connection)

Operation System : Linux

PTZ Functions: The ability to control PTZ cameras (Novus, Pelco, LG and others) utilizing Multiplexer without

the need to use additional keyboard, or through computer network utilizing Multi Viewer

software

Video Inputs: 9 x BNC, 1Vp-p, 75 Ω

Video Outputs: 1 x BNC –main monitor

1 x S-video - main monitor

1 x VGA - main monitor

1 x BNC - Call monitor

Resolution: 720 x 288, 360 x 288 (PAL), defined individually for each channel

Display Modes: 1, 4, 6, 8, 9, PiP, sequence, user defined, digital zoom, of selected image field x2, x3, x4

Compression: Wavelet (7 levels)

Recording Speed: from 1 frame/h up to 50 frames/s (100 frames/s for resolution 360 x 288), defined individually

for each channel

Display Speed: up to 25 frames per second for each channel (up to 225 frames per second for 9 channels split

screen)

Recording Modes: normal (continuous), schedule, alarm and/or motion detection event activation

Data Search: time/date or event

Motion Detection: grid 16x16, with adjustable sensitivity settings (specific for each camera)

Event List: up to 25 000 events (video loss detection, power loss, disk full, motion detection)

Alarm Inputs: 9 TTL inputs

Relays: 4 relay outputs (alarm) fully adjustable

Audio Inputs: 1 mono input cinch type, enhancing regulated in Multiplexer menu, sampling 8kHz

Audio Outputs: 1 mono output cinch type, signal level -5dB

Operation: front panel, remote control IR (included), computer network

Schedule: individual settings for each day of the week, individual settings for each camera, individual

settings for specific, exceptional days (holidays, etc.), different recording modes integration ,

CD writer: built in (version CD), external connected through USB port or IEEE1394 port (FireWire)

Image Backup: CD, HDD, USB devices, via computer network

External Ports: 1 x Ethernet - joint RJ-45, 10Mbit/sek,

1 x USB for external memory drives connection

1 x IEEE1394 for external memory drives connection

1 x RJ45 - for Speed Dome Cameras connection

2 x RJ45 - for system keyboard control

„Watch Dog” Function: hardware

Password Authorization: multilevel user accounts access and password protection, separate network passwords

Power Supply: 115-230 V AC, 55 W (±25%)

Dimensions: 432 x 88 x 430 mm

Weight: 8,2 kg (without HDD)

Operating Temperature: 0°C do +40°C

Humidity: 10-80% of relative humidity (without condensation)

FOREWORD INFORMATION

NV-DVR900 / NV-DVR1600 ver. 2.0 - User’s Manual

8

1.3. NV-DVR1600 / NV-DVR1600CD Technical Specification

Operation Mode: Quadroplex (simultaneous recording, live display, data playback and network connection)

Operation System : Linux

PTZ Functions: The ability to control PTZ cameras (Novus, Pelco, LG and others) utilizing Multiplexer without

the need to use additional keyboard, or through computer network utilizing Multi Viewer

software

Video Inputs: 16 x BNC, 1Vp-p, 75 Ω

Video Outputs: 1 x BNC –main monitor

1 x S-video - main monitor

1 x VGA - main monitor

1 x BNC - Call monitor

Resolution: 720 x 288, 360 x 288 (PAL), defined individually for each channel

Display Modes: 1, 4, 6, 8, 9, 13, 16, PiP, sequence, user defined, digital zoom, of selected image field x2, x3, x4

Compression: Wavelet (7 levels)

Recording Speed: from 1 frame/h up to 50 frames/s (100 frames/s for resolution 360 x 288), defined individually

for each channel

Display Speed: up to 25 frames per second for each channel (up to 400 frames per second for 16 channels split

screen)

Recording Modes: normal (continuous), schedule, alarm and/or motion detection event activation

Data Search: time/date or event

Motion Detection: grid 16x16, with adjustable sensitivity settings (specific for each camera)

Event List: up to 25 000 events (video loss detection, power loss, disk full, motion detection)

Alarm Inputs: 16 TTL inputs

Relays: 4 relay outputs (alarm) fully adjustable

Audio Inputs: 1 mono input cinch type, enhancing regulated in Multiplexer menu, sampling 8kHz

Audio Outputs: 1 mono output cinch type, signal level -5dB

Operation: front panel, remote control IR (included), computer network

Schedule: individual settings for each day of the week, individual settings for each camera, individual

settings for specific, exceptional days (holidays, etc.), different recording modes integration ,

CD writer: built in (version CD), external connected through USB port or IEEE1394 port (FireWire)

Image Backup: CD, HDD, USB devices, via computer network

External Ports: 1 x Ethernet - joint RJ-45, 10Mbit/sek,

1 x USB for external memory drives connection

1 x IEEE1394 for external memory drives connection

1 x RJ45 - for Speed Dome Cameras connection

2 x RJ45 - for system keyboard control

„Watch Dog” Function: hardware

Password Authorization: multilevel user accounts access and password protection, separate network passwords

Power Supply: 115-230 V AC, 55 W (±25%)

Dimensions: 432 x 88 x 430 mm

Weight: 8,2 kg (without HDD)

Operating Temperature: 0°C do +40°C

Humidity: 10-80% of relative humidity (without condensation)

FOREWORD INFORMATION

NV-DVR900 / NV-DVR1600 ver. 2.0 - User’s Manual

9

2. DEVICE POWER UP

2.1 Preparing the equipment for operation.

Please take extra caution during unpacking the device.

Please ensure that following items are included in the package

If the equipment has been damaged during transport , the contents of package should be packed back

to the original box. Contact with the supplier for further assistance.

WARNING !

It is not allowed to power on the equipment directly after it has been brought from a place of low

temperature. If the device has been brought from the area of lower temperature the user should

wait until the equipment will slowly warm up and reach the room temperature. The condensation

of moisturized air may cause short circuit and in result damage the device.

Digital Multiplexer

NV-DVR900, NV-DVR1600 or versions with CD writer

IR Remote Controller Mounting Brackets type Rack

HDD Swappable Bay lock-keys

(without CD writer versions only)

Power Supply cord

Screw Joints Terminals

4 rubber base stands CD-ROM containing necessary

Software and Manuals

DEVICE POWER UP

NV-DVR900

NV-DVR900CD

NV-DVR1600

NV-DVR1600CD

U s e r ’ s M a n u a l

User’s Manual

NV-DVR900 / NV-DVR1600 ver. 2.0 - User’s Manual

10

Warning: Before device power up user must read and heed all the instructions described in this

manual concerning back panel inputs usage and description.

Warning: Before connecting the device to power supply make sure that the AC SELECT

voltage supply switch is set properly according to the local power network voltage.

This switch is marked on the next page as a number .

14

For Power of 115V AC

For Power network

230V AC

DEVICE POWER UP

Novus NV-DVR900 Manuale utente

Manuali Multiplexer popolari di altre marche