Novusun CNC MACH3 Manuale utente
百年品质，值得信赖 —— 您的产品名称
Manual
MACH3 Ethernet port 6 axis
Montion Controller NVEC400
M请在这里输入您的公司名称或产品名称
Manual of NV8727T4V4
www.nvcnc.net
Contects
Chapter 1.Introduction..................................................................................................................................- 1 -
1.1 Product Introduction ..............................................................................................................................- 1 -
1.2 Products specification ............................................................................................................................- 1 -
1.3 Products Appearance and size................................................................................................................- 2 -
1.4 substantival explanation.........................................................................................................................- 3 -
1.5 Noting and Waring .................................................................................................................................- 5 -
Chapter 2.Connection ...................................................................................................................................- 6 -
2.1 Device Power supply Solution...............................................................................................................- 6 -
2.2 Product connection define and method..................................................................................................- 7 -
Chapter 3.Software Installation ..................................................................................................................- 18 -
3.1 MACH3 Install ....................................................................................................................................- 18 -
3.2 Plugin Install ........................................................................................................................................- 21 -
Chapter 4.Setting of software .....................................................................................................................- 22 -
4.1 Open software ......................................................................................................................................- 22 -
4.2 Software Common settings..................................................................................................................- 23 -
Chapter 5.Using of software.......................................................................................................................- 31 -
5.1 Set Machine Coordinate system...........................................................................................................- 31 -
5.2 Set workpiece coordinate system.........................................................................................................- 33 -
5.3 Open G code file and run .....................................................................................................................- 35 -
Chapter 6.Question & Answer....................................................................................................................- 37 -
6.1 Q&A for Hardware ..............................................................................................................................- 37 -
6.2 Q&A for Software................................................................................................................................- 37 -
Chapter 7.Contract us .................................................................................................................................- 38 -
Chapter1 Introduction
Manual of NVEC400
- 1 -
Chapter 1. Introduction
1.1 Product Introduction
Novusun CNC has engaged in the Numerical control industry for 7 years, specialized in
the research, development and production of various CNC controller systems with high quality
and high reliability. We produce the Brushless DC motor, Stepper motor driver, and also 1 to 6
axis CNC motion controllers.。
NVEC400 is the 6 axis motion controller we spend 1 years to design.
NVEC400 support Mach3 software, through ETHERNET port to communicate with
computer.
This manual introduces operation, connection and usage schedule of our professional
motion controller for engraving machine. Through a lot of the drawing the users can learn
quickly how to use this motion controller.
1.2 Products specification
Support Ethernet port;
16 ports photoelectric isolated input interface；
1 2 ports photoelectric isolated output interface；
1 port 0-10V spindle speed analog output interface(can change to PWM output)；
2 relay output.
can support 6 axis stepper systems,400KHz pulse output for every axis；
ARM motion control chip；
main device is 12V-32VDC power supply input, current should higher than 1A；
www.nvcnc.net
Chapter1 Introduction
Manual of NVEC400
- 2 -
Aluminum alloy shell, strong anti-interference ability, excellent design of EMC;
1.3 Products Appearance and size
NVEC400 motion controller is with the sealed open structure, there are 2pcs setting holes
at the bottom. We can fix 2pcs 4mm diameter holes at the cabinet, and install the controller into
the cabinet.The controller appearance as the Figure 1-1 and Figure 1-2 show:
The products overall size is 150mm*105mm*25mm；
The bottom install size is 105.5mm*85.8mm。
Figure1-1. NVEC400 front appearance and size
www.nvcnc.net
Chapter1 Introduction
Manual of NVEC400
- 3 -
Figure1-2. The other side of NVEC400and installation dimensions
1.4 substantival explanation
When operate the NVEC400, where will be a lot of English abbreviation, now we list all of
them for your kindly references:
FRO: Feeding adjust: During the operating process, the F value already set, and need to
adjust the current feeding speed, then we can adjust FRO value to realize it.
SRO: Spindle speed adjust: During the operating process, the S value already set, and need
to adjust the current spindle speed, then we can adjust SRO value to realize it :
Current Speed S#=setting S*SRO.
www.nvcnc.net
Chapter1 Introduction
Manual of NVEC400
- 4 -
SRJ: speed adjust manually
During the operating process,as the manual speed already set,and we need to adjust the
current speed,and impossible to fix the value during it is working,then we can revise the SRJ
value to realize it.
Current manual speed FS#=Setting manual speed*SRJ.
F:Feedingspeed,the unit is mm/min.For example F=200,means every minute feeding
2000mm.
S: Spindle Speed. Unit is rad/min.For example S=20000,means 20000 revolution/Minute.
X axis Coordinate
Y axis Coordinate
Z axis Coordinate
A axis Coordinate
B axis Coordinate
C axis Coordinate
Ready:ReadyMode.In the mode we can do any operation,include processing or values
modification or starting 2nd mode.
Reset: Reset mode.In this mode,it should stop every operation.
“Step”:Manual Step Mode. Every axis candonduct the manual step operation at this mode.
MPG: MPG mode.Every axis can conduct the MPG operation at this mode.
www.nvcnc.net
Chapter1 Introduction
Manual of NVEC400
- 5 -
1.5 Noting and Waring
Free from exposure to the electronics without waterproof
function.Please environment as dry as possible. This is the icon.
Wiring warning, the IO input terminal of this equipment support the
equipment with source switch (such as Inductive proximity switch.)When using
such kind of switch, attention please: avoid the +terminal and –terminal of
power supply to connect with GND.This equipment’s analogy quantity
output terminal of spindlecontrolalos have a certain load capacity. Please avoid
this terminal connect with GND.in case that the interior components and parts be
brokendown.
Operation warning, Please do the security measures well when
connecting with the machine tools.The ESTOP, limit and other things must be
perfected.When comes across the emergancy, please press the ESTOP key at once
or cut off the power directly, thus avoiding the equipment damage and casualty.
High voltage danger, the primary device is 18-32VDC power
supply.Voltage equipment.Pls pay attention to the electricity, safety when conducting
the operation
www.nvcnc.net
Chapter2 Connection
Manual of NVEC400
- 6 -
Chapter 2. Connection
2.1 Device Power supply Solution
The power supply solution in the field of the Industrial automation is always very
complicated, there is a lot of the GND, now we descript the structure of the power supply as
below:
The power supply structure as the Figure 2-1,main power supply input and MPG module and
stepper control output module are common GND, Limited and Estop input module and Spindle
speed adjust M3/M8/M1 module are common GND, between main power supply and output
module there are photoelectric isolation. The inputs of limited switch and Estop and so on are
Common anode, inside of the device, there is +12VDC as common+, no need to connect external
power supply. Based on the reference of output GND interface, output a 0-10V adjustable voltage
to adjust the spindle speed,M3/M8/M10 digital output interface is open-GND. If connect an
external relay, need to output GND to refer to, and give the relay an external power supply.
Figure2-1. Power supply structure of NVUM
www.nvcnc.net
Chapter2 Connection
Manual of NVEC400
- 7 -
2.2 Product connection define and method
Figure2-2. Product wiring section and interface summary
As the Figure 2-2 showed, the connection of the controller includes power supply interface,
Ethernet connection interface, Stepper/Servo control output interface, spindle control output
interface, Estop and limited switch and tool setting input interface and so on. Now we descript
them in details as below.
2.2.1 Ethernet port
As Figure 2-2 showed,No.1 terminal block is Ethernet port, you can connect with the
computer through this interface. Then mach3 can control this card.
2.2.2 Stepper motor controller port
As Figure 2-2 showed,No.2 terminal block is steppermotor controller port, which is define as
www.nvcnc.net
Chapter2 Connection
Manual of NVEC400
- 8 -
X/Y/Z/A/B/C axis from left to rught. Specific definition is
COM+/CPX-/DIRX-/COM+/CPY-/DIRY-/COM+/CPZ-/DIRZ-/COM+/CPA-/DIRA-/COM+/CP
B-/DIRB-/COM+/CPC-/DIRC- from left to right. The connection method with the stepper motor
driver see as Figure 2-3.
Figure2-3. Connect with steppermotor driver
2.2.3 Spindle control output
We define the interface from left are: GND(GND for VSO),VSO(0-10V adjustable speed
output),10VIN(supply by inverter or other spindle driver),GNDO(GND for
OUT1-3),OUT1,OUT2,OUT3.
Take Nowforeuer inverter as the example. Spindle control output and the inverter connection
showed as Figure 2-3.X1 control spindle RUN and STOP, AIN1 modify spindle's speed.
www.nvcnc.net
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Novusun CNC Hardware di rete
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
