Nukeproof MEGAWATT Manuale utente
MEGAWATT CARBON
BIKE MANUAL
MEGAWATT CARBON BIKE MANUAL | 2
CONGRATULATIONS ON YOUR NEW MEGAWATT CARBON PURCHASE AND WELCOME TO THE NUKEPROOF FAMILY!
The Nukeproof Megawatt Carbon was born from a shared heritage of performance. Nukeproof and SRAM teamed together to
bring you the ultimate e-bike experience — the latest and greatest in eMTB technology wrapped in a carbon frame designed
to wallop the nastiest trails on the planet. Developed in collaboration with the team at SRAM, the Megawatt was used as the
testbed for the first-of-its-kind Eagle Powertrain as it was prototyped over two years.
The SRAM Eagle Powertrain is an integrated eMTB ecosystem that meshes SRAM AXS components, the Eagle Transmission,
and a powerful drive unit into one cohesive package. All systems work in unison to bring you an experience elevated above
all previous e-bikes.
Settled and stable yet playful and agile, the Megawatt has earned a reputation for surefootedness in terrain where most
bikes fight for traction. We didn’t want to lose those qualities, so the rear linkage, suspension kinematic, and geometry has
only been slightly tweaked from the alloy model.
Your Megawatt Carbon has been meticulously engineered using T700/800 carbon with intricate features and design cues,
maximising the bikes efficiency, rider experience and offering ultimate performance. The result is a carbon E-Enduro
machine that handles like no other and is purpose built for the new SRAM Eagle Powertrain.
This manual will help you get familiar with your Megawatt Carbon, it’s SRAM Eagle Powertrain system, and will serve as a
helpful resource for setting-up and maintaining your bike. Please read this manual carefully to help look after and enjoy
your Megawatt Carbon to its fullest. If there is any doubts or queries with the set-up, use, or maintenance of your Megawatt
Carbon, please consult with an authorised dealer. Full dealer listings can be found at
NUKEPROOF.COM
Please ensure you also read the
GENERAL BIKE MANUAL
before your initial ride.
CONGRATULATIONS!
MEGAWATT CARBON BIKE MANUAL | 3
CONTENTS
Section 1 - Unboxing Your Bike
Section 2 – Assembling Your Bike
Section 3 – Powertrain Quick Start Guides
Section 4 – SRAM APP
Section 5 – Suspension in More Detail
Section 6 - Maintenance and Care
Section 7 – Specifications
Section 8 - Assembly and Spares
Section 9 – SRAM Components
Section 10 - Troubleshooting & Error Codes
Section 11 – Warnings
Section 12 – Warranty
Section 13 – Logbook
Section 14 – Certificate of Conformity
MEGAWATT CARBON BIKE MANUAL | 4
SECTION 1 - UNBOXING YOUR BIKE
For mail order customers your new Megawatt Carbon will be delivered in a specifically designed bike box, the type and size
of box will vary between retailers. The bike will come with a number of spares, Nukeproof provides tubeless valves and
additional items will depend on the dealer you have purchased the bike from. Some Nukeproof dealers will provide pedals
and basic tools with the bike on delivery, typically a pedal spanner and Hex Key set.
PACKAGING ON ARRIVAL
1. Your new bike will arrive in large carboard box, box size
will depend on retailer purchased from.
2. Open end of box carefully, remove parts box and set
aside. Please note, if dealer has shipped battery not
installed, it is heavy, and care is needed when removing.
MEGAWATT CARBON BIKE MANUAL | 5
3. Remove cardboard front wheel support from box, this
will now allow you to remove the bike.
4. Carefully pull bike out of box, we would advise help at
this point from another person to hold the box. If your
dealer has stapled the box, please ensure staples are
removed to prevent paint damage.
5. The bike will be carefully wrapped before shipping to
prevent any damage in transit. If any damage is found,
report directly to your dealer.
6. Carefully remove protective wrapping, please dispose
of appropriately and recycle where possible.
MEGAWATT CARBON BIKE MANUAL | 6
SECTION 2 – MAIL ORDER ASSEMBLY AND INITIAL SET-UP
This section details how to get your bike ready for setting up and riding out of the box, this will be relevant for mail order
bikes, generally the following will be done already if purchased and collected through a local authorised Nukeproof dealer.
Do not turn on your bike at this point.
FIT BARS
1. Unscrew face plate bolts from stem with a 4mm Hex
Key, remove stem face plate and bolts, set aside safely
for installing later.
2. Place bars to stem, using the set-up lines to position
the bars centrally. Ensure brake lines are not tangled at
this point.
3. Tighten the face plate bolts to the stem with a 4mm
Hex Key, start with the top bolts and move to the bottom
bolts. Ensure bolt torque is evenly spread around all
four bolts before fully tightening. Reference the torque
details on the stem.
4. You can adjust the roll of the bars back or forward at
this point to your personal preference. Ensure the bars
are still centered when adjusting and use the markings
on the bars to help. This is a good point to adjust position
of PODS and brakes levers.
MEGAWATT CARBON BIKE MANUAL | 7
FIT PEDALS
All Nukeproof pedals are standard 9/16” x 20 tpi so are compatible with all modern cranks.
TOOLS REQUIRED
• 8mm Hex Key (All pedals) Or 15mm Spanner (Alloy pedals only)
• Torque Wrench
• Grease
HOW TO DETERMINE THE DIFFERENCE BETWEEN THE LEFT AND RIGHT PEDAL
This step is very important, failure to install the pedals on the correct side of the bike will cause irreparable damage your
crank and pedal.
ALLOY PEDALS
Alloy pedal axles are marked “L” indicating the left pedal (non-driveside) and “R” indicating the right pedal (drive-side).
LEFT PEDAL RIGHT PEDAL
PLASTIC PEDALS
Plastic pedal bodies have an “L” moulded in the body indicating the left pedal (non-driveside) and “R” moulded indicating
the right pedal (driveside).
The axles are also different, the left axle has a ring indented around the lip of the axle whereas the right does not.
LEFT PEDAL RIGHT PEDAL LEFT AXLE RIGHT AXLE
MEGAWATT CARBON BIKE MANUAL | 8
FITTING
1. Check the threads on your crankarm are clean and have
no damage.
2. Take your RIGHT pedal and grease the axle.
3. Line the pedal up to the driveside crank, place your
8mm hex key through the driveside crank and into the
back of the pedal axle. Start to turn the hex key in a
clockwise direction (as you look at the crank towards the
handlebars). There should be no resistance as you turn
the hex key, if there is resistance STOP immediately and
check you are fitting the correct pedal and the threads
are correctly aligned between the axle and crank. Do not
force the pedal into the crank.
4. Take your LEFT pedal and grease the axle.
5. Line the pedal up to the non-driveside crank, place your
8mm hex key through the non-driveside crank and into
the back of the pedal axle. Start to turn the hex key in a
anticlockwise direction (as you look at the crank towards
the handlebars). There should be no resistance as you
turn the hex key, if there is resistance STOP immediately
and check you are fitting the correct pedal and the
threads are correctly aligned between the axle and crank.
Do not force the pedal into the crank.
6. With both pedals now on the crank arms, tighten to
30Nm with a torque wrench.
Your pedals are now fitted and safe to ride.
MEGAWATT CARBON BIKE MANUAL | 9
ADJUST SADDLE HEIGHT
1. To adjust the height of the saddle, loosen the seat
clamp bolt with a 5mm Hex Key, once height is adjusted,
retighten
2. To get a starting point for your saddle height, stand
beside your bike and adjust the height to your hip bone
3. Sit on the bike with assistance from another person or
leaning against a secure structure. Pedal to the 6 o’clock
position to identify if the saddle height is suitable and
you can begin to adjust to suit your preference
4. Do not exceed the minimum insertion depth marked
on the post
MEGAWATT CARBON BIKE MANUAL | 10
ADJUST SADDLE ANGLE AND POSITION
To ensure comfort when seated pedalling, the saddle
position can be adjusted. A Torx 25 (T25) wrench is
required.
To adjust the saddle angle, forward and back. Loosen the
T25 bolt, position the saddle and retighten the T25 bolt.
Indice
Altri manuali Nukeproof Bicicletta
