Numeris aspire Manuale utente
Touch RFID
Bolt Mechanism Shared Use Functionality
Product Guide
1
Lock Parts
Keys
Key Insertion
RFID
CARD
RFID Card
Aspire locks with a touch RFID interface are operated by an RFID credential or by an ADA compliant User Key. Manager credentials (Manager
Key or RFID) provide management access and/or external power. Programming is accomplished via a Programming Key unique to the lock
system. An optional mobile application tool simplifies lock system management and provides audit trail.
User Key Manager Key1Programming Key2
Operates the lock •••
Overrides user access ••
Allows management inspection ••
Provides external power •
Programs manager credentials to the lock •
Numeris logo must face up on standard and narrow body locks.
NarrowStandard
Front Unit Rear Unit
Cover Plate Lock Mounting Holes
1/2" (12.7 mm)
Deadbolt
Cover Plate
Screws
Connection Options
Cable
Pin
1Up to 6 manager credentials (Manager Key or RFID) may be programmed to each lock. If managed with the optional Mobile App, up to 250 manager credentials may be programmed to each lock.
21 Programming Key allowed per lock system.
Standard Narrow
Key Button Key Button
Key Slot
Key Slot
Reader
LED Usage
Indicator
Pull Handle Pull Handle
RFID Credentials
RFID Adhesive
Label RFID Keyfob RFID Wristband
Touch RFID
Bolt Mechanism Shared Use Functionality
Product Guide
2
Setup
Programming Instructions
RFID
CARD
Manager
Locks are shipped with factory default settings (only operates by pressing `). Each lock must be setup to operate with a Programming
Key and manager credentials (Manager Key or RFID).
Insert the Programming Key.
A two-tone beep will be heard and
the LED and Reader will turn on.
Insert one Manager Key or present
one Manager RFID at a time.
A two-tone beep will be heard for each
manager credential programmed.
Insert the Programming Key.
A two-tone beep will be heard and
the LED and Reader will turn off.
Repeat above steps for each lock
or follow instructions to Express
Register Manager Credentials to
setup all the locks.
Express Register Manager Credentials
The Programming Key can quickly program multiple locks to operate with the same manager credentials.
Go to a lock already programmed to operate with the manager credentials.
Touch and hold
`
for 10 seconds (a two-tone beep will be heard after
5 seconds followed by 2 sets of two-tone beeps after 10 seconds) then
release. The LED will flash.
Insert the Programming Key.
Two sets of two-tone beeps will be heard and the LED will turn off.
Insert the Programming Key to program each lock to operate with the same
manager credentials.
Two sets of two-tone beeps will be heard and the LED will flash once
to indicate successful programming.
End express registration mode.*
Go to any programmed lock.
Touch `then insert the Programming Key.
Touch `then insert the Programming Key again to return the bolt to the
original position.
*The Programming Key will continue to function in express registration mode until it is used to operate a lock.
1324
1
3
2
4a 4b
Touch RFID
Bolt Mechanism Shared Use Functionality
Product Guide
3
Programming Instructions
RFID
CARD
Manager
Add Manager Credentials
Manager credentials can be programmed to the locks at any time.
Go to a lock requiring additional
manager credentials.
Touch and hold
`
for 5 seconds
(a two-tone beep will be heard after
5 seconds) then release.
The LED will flash and the Reader
will turn on
.
Insert the Programming Key.
A two-tone beep will be heard.
Insert each additional Manager Key
or present each Manager RFID one
at a time.
A two-tone beep will be heard for each
manager credential programmed.
Insert the Programming Key.
A two-tone beep will be heard and
the LED and Reader will turn off.
Repeat above steps for each lock
or follow instructions to Express
Register Manager Credentials to
quickly program the same manager
credentials to operate multiple locks.
Replace Programming Key or Manager Credentials
The locks must be reprogrammed to prevent the lost/stolen Programming Key or manager credentials from operating a lock.
To replace the Programming Key:
Note the order or serial number (found on the lock’s rear unit). Contact Digilock Support to purchase a replacement Programming Key.
To replace Manager Credentials:
Collect all remaining and replacement manager credentials.
Go to any lock operated by the lost/stolen manager credentials.
Touch and hold
`
for 5 seconds (a two-tone beep will be heard after 5
seconds) then release.
The LED will flash and the Reader will turn on.
Insert the Programming Key.
A two-tone beep will be heard.
Insert the Programming Key again.
Three sets of two-tone beeps will be heard and the LED and Reader will
turn off. All previously programmed manager credentials will be erased.
Follow instructions to Add Manager Credentials to program the remaining
and replacement manager credentials to the locks.
12 43
1
1a 1b
2
2a 2b
Touch RFID
Bolt Mechanism Shared Use Functionality
Product Guide
4
Operating Instructions - In Shared Use Functionality
RFID
CARD
RFID
CARD
Manager
RFID
CARD
Manager
RFID
CARD
or or
In shared use functionality, the user presents an RFID or inserts any User Key to lock and the same RFID or User Key to unlock. Once unlocked, the lock is
available for a different user.
*If a manager credential or the Programming Key is used to relock, the previous user credential will continue to operate the lock.
Operate with an RFID
To lock: Touch `then present an RFID.
To unlock: Touch `then present the same RFID.
Operate with a Manager Credential
To unlock: Insert a valid Manager Key or touch `then present a valid
Manager RFID.
To relock: Insert a valid Manager Key or touch `then present a valid
Manager RFID.*
Operate with a User Key
To lock: Insert any User Key.
To unlock: Insert the same User Key.
Operate with the Programming Key
To unlock: Touch `then insert the Programming Key.
To relock: Touch `then insert the Programming Key.*
1a
1a
1a
1a
1b
1b
1b
1b
Touch RFID
Bolt Mechanism Shared Use Functionality
Product Guide
Phone: 707 766 6000
050917
PG-NMTR-AT-DEN
5
Battery Replacement (shown with cable rear unit)
Support
It is not necessary to uninstall the lock from the door.
Remove the screws and the cover plate. Pull the battery pack from the rear housing.
Replace with four premium alkaline
AA batteries.
Place the battery pack back into the rear
housing and screw cover plate in place.
Error Condition Indicators
10 rapid beeps:
The lock is binding which means that either door alignment or stored items are preventing the lock from operating. Press on the door while
operating the lock. If error condition persists, contact Digilock support for assistance.
2 sets of three beeps:
The batteries are low. Replace the batteries.
Does not Unlock with the User Credential (User Key or RFID)
The lock does not recognize the user credential. For immediate access, operate with a valid manager credential.
Does not Operate with a Manager Credential (Manager Key or RFID)
The lock does not recognize the manager credential. Follow instructions to Add Manager Credentials to program the manager credential to
the lock. For immediate access, operate with another valid manager credential or with the Programming Key.
Does not Operate with the Programming Key
The lock does not recognize the Programming Key. If the Programming Key has been replaced, operate with the Replacement
Programming Key. Contact Digilock support for additional assistance.
No Audible Feedback when `is Pressed
▪The batteries may need to be replaced. For immediate access, operate with a valid Manager Key.
▪The front unit may not be properly connected to the rear unit. Remove the lock from the door and check the connection.
123
Touch RFID
Bolt Mechanism
Shared Use Functionality
Product Guide
Phone: 707 766 6000
www.digilock.com | [email protected]
050917
PG-NMTR-AT-DEN
6
Regulatory Information
The user is cautioned that changes or modifications not expressly approved by CompX, Timberline could
void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undersired operation.
This equipment has been tested and found to comply with the lim its for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residen tial installation. This equipment generates, uses and can radiate radio
frequency energ y and, if not installed and used in accordance with the instructions,may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuitdifferent from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV tech nician for help.
Indice
Altri manuali Numeris Serratura
