Nuna Bugaboo turtle Guida
IMPORTANT: KEEP THIS INSTRUCTION BOOKLET IN THE
PLACE PROVIDED ON THE CHILD RESTRAINT
Bugaboo child restraint in
collaboration with Nuna
Bugaboo Turtle by Nuna
INSTRUCTIONS FOR INSTALLATION
BUGABOO SEAT AND BASE ITEM NUMBER 84701ZW01
/ BASE ONLY 84702ZW01
NUNA SEAT AND BASE MODEL NUMBER CF05703
/ BASE ONLY IF05701
IMG-0107D
INSTALLATION
Bugaboo turtle by Nuna is based on the Nuna KLIK plus model
bugaboo cameleonbugaboo fox bugaboo bee bugaboo donkey bugaboo lynx
when used with additional Bugaboo adapters for
designated bugaboo strollers, compatible with:
nothing like a Bugaboo
1
INSTALLATION
IMPORTANT: This is a rear facing child restraint. Do not face forward.
Distributor: Bugaboo Australia Pty Limited,
suite 2, level 2, 156 Edgecliff Road, Woollahra, NSW 2025
For after sales service: Bugaboo.com/support
IMPORTANT:
Before installation and use of this child restraint
check that it is suitable for the size of your child.
See pages 4 & 7 of the USE Instructions.
DO NOT USE THIS CHILD RESTRAINT UNTIL YOU HAVE
READ AND UNDERSTOOD THE INSTRUCTIONS IN THIS USER
GUIDE AND IN YOUR VEHICLE OWNERS MANUAL
Contents
Quick Reference 2
WARNINGS 3
Additional Warnings 4
Features 6
Installation - General 7
Installation - Vehicle Belts 9
Checklist - Vehicle Belt Installation 11
Installation - ISOFIX Compatible Connectors 12
Checklist - ISOFIX Installation 17
Fitting Restraint to Base 18
WARNINGS – Tether Strap 19
How to use the Tether Strap 20
Installation – Tether Anchorage 23
Use with Strollers 26
Cleaning and Maintenance 27
32
INSTALLATION
INSTALLATION
Vehicle Belt (if used)
must always be secure
and pulled tight.
See pages 9 –11
Carry Handle
must always be locked
into position.
Tether Strap
must always be used when the
restraint is installed in a vehicle.
Store end of tether in bag.
See page 20 - 22
Base Recline Adjustment
base must be reclined correctly
See pages 7 & 8
Secure Latching
restraint must be
securely latched
into base.
See page 18
54
INSTALLATION
INSTALLATION
TO BE USED WITH A LAP-SASH/LAP ONLY SEATBELT
OR ISOFIX LOW ANCHORAGES IN THE BACK OF MOST
CARS WITH FORWARD FACING SEATS.
This restraint is 700 mm long, 440 mm wide and 500 mm
high (with the handle down). Check the measurement
between the front of the seat back of the rear seat and all
front seats in the car in which the restraint is intended to
be used to ensure the space available is sufcient.
Seat belt extenders are not recommended if the car seat
belt is too short to secure the child restraint. If the car
seat belt is too short get advice from a child restraint tter
regarding use of these.
ADDITIONAL WARNINGS
Never install the Child
Restraint in a seat with a
front airbag. DEATH or
SERIOUS INJURY may
occur. Refer to your vehicle
Owners Manual for airbag
warnings and information.
Only install child restraint
in a forward facing vehicle
seat. Never install in a seat
that faces the rear or the
side of the vehicle.
This is a rearward facing
child restraint. Do not install
facing the side or forwards.
ADDITIONAL WARNINGS
Always check child restraint
to base connection.
CLICK
1
2
CHECK
500
700
440
76
INSTALLATION
INSTALLATION
INSTRUCTIONSINSTRUCTIONS
3
2
Features
1
4
10
8
7
1 Tether Strap
2 Child Restraint Release
Lever
3 Tether Strap Anchorage
4 Tether end storage
5 Vehicle Belt Lock-Off
6 Bubble Level Indicator
7 Instruction Manual
Storage
8 Recline Foot
9 ISOFIX connector
10 Recline Foot Fold Latch
11 ISOFIX connectors fold
latch
6
11
9 9
9
5
Where to install the child
restraint?
Only install the child re-
straint in a forward facing
vehicle seat.
Never install in a seat that
faces the rear or the side of
the vehicle.
Install in the rear seat, the
safest place is normally the
centre.
The base can be installed
on vehicles seats tted with
either a lap belt or a lap/
sash belt or ISOFIX anchor-
ages.
To install correctly the
vehicle must be on a level
surface.
IMPORTANT:
Correct position and
installation is essential
for your child's safety.
Installation - General
98
INSTALLATION
INSTALLATION
1
1 Position base on a
forward facing vehicle
seat.
Adjust base so bubble
is between the black
patches.
2 Use recline adjustment,
if needed, to achieve
correct angle for
installation.
Recline adjustment foot
snaps into position.
3 If the recline adjustment
foot does not give
sufcient recline, add a
folded towel or similar.
3
2
IMPORTANT:
Any extra padding
placed under the base
must be firmly folded so
that when the vehicle
belts are pulled up tight,
the base is secure.
Always secure the base
with a vehicle belt, even
when the restraint is not
fitted to it. An unsecured
base may be dangerous
in an accident or sudden
stop.
Installation - Vehicle Belts
REARWARD-FACING
BELT PATH
INSTALLED
BASE
Use the Belt Path
labels as a guide for
correct belt placement.
1110
INSTALLATION
INSTALLATION
3. Buckle the vehicle belt.
2. Open the belt lockoff
and place the shoulder
and lap belts across it.
4. Push the base into the
vehicle seat rmly Aand
pull the vehicle belts
tight B.
"CLICK"
3
4
A
B
2
1. Place the base on the
vehicle seat and pass
the vehicle belt through
the openings in the base
labeled ‘BELT PATH’
1
Installation - Vehicle Belts 5. Hold vehicle belts tight
and engage the belt
lockoff.
3. Vehicle belt is not
twisted.
4. Level indicator
bubble is fully in the
clear area.
2. Vehicle belt is tight.
2
Checklist — Vehicle Belt Installation
1. Vehicle Buckle
engaged.
1
5
4
3
BELTS MUST BE
TIGHT.
LOOSE BELTS ARE
DANGEROUS.
1312
INSTALLATION
INSTALLATION
ISOFIX
Typical marking showing
location of ISOFIX low
anchorage points.
Installation - ISOFIX
Compatible Connectors
Some vehicles are tted
with ISOFIX low anchorage
points.
These are are found at the
bottom of the back seat
backrest.
This child restraint has
connectors to attach to
them.
If the ISOFIX low anchorage
points are not clearly
visible the vehicle seat will
be marked with labels to
show their location.
If in doubt that the vehicle
is tted with such points
check the Vehicle Owners
Manual.
LATCH
WARNING
IMPORTANT Do not attach the lower attachment
connectors of two separate child restraints to the
same ISOFIX low anchorage in your car.
Always attach the top tether strap to the child
restraint upper anchorage in your car.
Child restraint lower attachment connectors and the
ISOFIX low anchorages in your car are designed to
withstand only those loads imposed by a correctly
tted child restraint.
Some vehicles sourced from
the USA may be marked
LATCH.
ISOFIX and LATCH low
anchorage points are the
same.
1514
INSTALLATION
INSTALLATION
Installation - ISOFIX
Compatible Connector Guides
TO FIT:
1 Press the release button
under the front of the
base.
2. Swing the ISOFIX
compatible connectors
forward to their operating
position.
3 Attach each connector to
the vehicle ISOFIX low
anchorages.
Push rmly to connect.
Before fitting see general
installation instructions on
pages 7 & 8
3
1
2
3
5 Pull the base back to en-
sure both lower connec-
tors are engaged.
5
TO RELEASE:
6 Press both buttons
rmly. The connector will
release.
Pull the base back.
Storage
Store the ISOFIX compat-
ible connectors by swing-
ing them back until they
are snugly alongside the
base.
4 Indicator will show green
when connected. 4
6
Press both buttons
to release
Altri manuali per Bugaboo turtle
3
Indice
Altri manuali Nuna Seggiolino auto
Nuna
Nuna Norr Manuale utente
Nuna
Nuna rava Manuale utente
Nuna
Nuna Pipa Manuale utente
Nuna
Nuna Pipa Manuale utente
Nuna
Nuna PIPA LITE R Manuale utente
Nuna
Nuna rebl Manuale utente
Nuna
Nuna Aace Manuale utente
Nuna
Nuna Pipa Lite Series Manuale utente
Nuna
Nuna pipa Series Manuale utente
Nuna
Nuna Exec Manuale utente
Nuna
Nuna Tres Manuale utente
Nuna
Nuna Exec Guida all'installazione
Nuna
Nuna tres lx Manuale utente
Nuna
Nuna Pipa Manuale utente
Nuna
Nuna royl Manuale utente
Nuna
Nuna PIPA next Manuale utente
Nuna
Nuna Bugaboo turtle Manuale utente
Nuna
Nuna MYTI Manuale utente
Nuna
Nuna Pipa Manuale utente
Nuna
Nuna rebl Manuale utente
