Nuvico EasyView CD-H266 Manuale utente

NUVICO INC.

Tel: 201-541-1605 Fax: 201-541-1620

Toll Free: 866-523-1700

E-mail: [email protected]

www.nuvico.com

NUVICO EasyView and the NUVICO logo are registered trademarks of NUVICO.

Wall Mount

Flush Housing w/

Surface Mount Plate

Flush Mount HousingSD Series w/ 36 LEDs

Indoor & Vandalproof Dome Cameras

INSTALLATION MANUAL

H Series

CD-SD266 CD-SD3895 CD-SD922 CD-SD3895-L

CV-SD266 CV-SD3895 CV-SD922 CV-SD3895-L

CD-H266 CD-H3895 CD-H922

CV-H266 CV-H3895 CV-H922

1. Camera

2. Assembly & Mounting Accessories

3. Installation Manual

4. Mounting Template

SD Series

CD-WD266 CD-WD3895 CD-WD922

CV-WD266 CV-WD3895 CV-WD922

WD Series

Accessories

Available Models

Contents

About This Manual 3

Available Models 3

Contents 3

How to Open the Gimbal Cover 4

Assembly & Mounting Accessories 5

Dimensions 6

Parts Name and Descriptions 7

Base Installations 8

Mounting Housings to Electrical Junction Boxes 9

Connections 10

Vari-focal, DC Auto Iris Lens Adjustments 11

Dip Switch Adjustments forH&SDSeries 12

OSD Menu Instructions for WD Series 13

3-Axis Gimbal Adjustments 18

H Series Specifications 19

SD Series Specifications 20

WD Series Specifications 21

Fan & Heater Specification 22

CV-WM

CV-FH-V

CA-SMC30

Wall Mount Bracket for EasyView Domes

Fan & Heater for EasyView Vandalproof Domes

Service Monitor Cable for EasyView Domes

2•

About This ManualTable of Contents

•3

Before installing and using the camera, please read this manual carefully. Be sure to

keep it handy for later use. This installation manual covers the following models listed

below. Any difference in features for these models are indicated where necessary.

Note: Installation of this product should be made by a qualified technician and should

conform to all local codes.

High Resolution

550 TV Lines • Day/Night • IR LEDs

High Resolution • WDR • Day/Night

Assembly & Mounting Accessories

4•

How to Open the Gimbal Cover

•5

Step-1

As shown below, hold the Gimbal base firmly in place with one hand.

Step-2

Gently press PointsA&Bwith other hand and pull the Gimbal cover off.

Step-3

Make necessary lens adjustments. Refer to page-10.

Step-4

Replace the Gimbal cover by gently pressing back onto the Gimbal base.

Gimbal Base

Point-A

Point-B

Gimbal Cover

EasyView Dome Cameras have vari-focal lens integrated inside the Gimbal. If you

require to make focal/focus adjustments, the Gimbal cover needs to be removed

temporarily. If lens adjustments are not necessary, skip to page-11.

• Torx Wrench - For Vandalproof Domes

Model #: T20

Length: 21/2"

Thickness: 1/8"

• Assembly Screws - For Vandalproof Domes

These screws are used to affix dome cover to flush housing.

Model #: Philips M4x10

Qty: 3

Length: 10mm

Thickness: 4mm

• Assembly Screws - For Indoor Domes

These screws are used to affix dome cover to flush housing.

Model #: Philips ST4x12

Qty: 3

Length: 12mm

Thickness: 4mm

• Mounting Screws - For Vandalproof & Indoor Domes

These Screws are used to mount both surface mount plate or flush housing

to a sturdy surface. If necessary, use the anchors included in the package.

Model #: Philips ST4x30

Qty: 4

Length: 30mm

Thickness: 4mm

• Anchors - For Vandalproof & Indoor Domes

Qty: 4

Length: 30mm

Thickness: 6mm

Parts Name and Descriptions

14499

147

108

89 121

83.1

109

143

112

25 109

6•

Dimensions (UNIT: mm)

•7

REMINDER

Do not aim the camera directly into the sun.

1. Lens

2. Power Input Connector

12VDC/24VAC Dual Voltage

3. Video Output Connector - BNC

4. Service Monitor Output Connector

Use Cable CA-SMC30.

5. Camera Control Board

6. Safety Wire

7. Bubble

8. Dome Cover Ring

9. Flush Mount Base

10. Surface Mount Plate

11. Assembly Screws

Philips M4x9(Indoor), Torx M4x9(Vandalproof)

12. Assembly Screws

Philips ST4x12(Indoor), Philips M4x10(Vandalproof)

13. Mounting Screws

Philips ST4x30(Indoor & Vandalproof)

26.2

ø5.0

ø15

ø5.0

112

120∆120∆

109

ST4x30

ST4x12 or M4x10

Surface Mount

Surface Mount Template Flush Mount Template

Plastic DowelsPlastic Anchors

Flush Mount

ST4x30

Philips M4x9 or

Torx M4x9

Mounting Housings to Electrical Junction Boxes

8•

Base Installations

•9

Screws UNC 8-32 x 0.75

3/4" Pipe

Note: Screws required for electrical junction boxes are not supplied with the package.

These screws are readily available at local electrical supply stores.

Either flush mount or surface mount application, pre-drilled mounting holes on EasyView

Domes accommodate various electrical junction boxes, making installation easy and less

time consuming.

1. Remove dome cover by loosening 3 screws. For indoor domes, use standard Philips

screw driver. For vandalproof domes, use Torx wrench provided with the package.

2. Surface Mount:

Using four ST4x30 screws, mount surface plate to a sturdy surface. Using three

ST4x12(Indoor) screws or M4x10(Vandalproof) screws, affix flush mount base to

surface plate.(For flush mount application, disregard this section)

3. Flush Mount:

Using four ST4x30 screws, affix flush mount base to a sturdy surface.

Adjust Focus

Adjust Angle for Field of View

Remove the Gimbal cover from the Gimbal base.

Loosen Zoom & Focus screws and make necessary adjustments as shown.

Field of View: Telephoto(T)toWide( W )

Focus: Near(N)toInfinity(∞)

If the picture is too bright or too dark, adjust the DC Level by turning left or right.

On WD Series, use the OSD Menu using the mini joystick board.

Please refer to Page 12 of this manual for further instructions.

Replace the Gimbal cover back to the Gimbal base.

12VDC/24VAC

CCTV Monitor

Service Monitor

• Power connection - Requires 12VDC or 24VAC input depending on camera model.

• All camera model are supplied with second video output on the camera module. To use

this feature along with a service monitor, second monitor cable/connector

(Part# CA-SMC30) is required. Contact your distributor or NUVICO Sales Department

for further information.

Focus

Zoom

Gimbal Cover

OpenClose

DC Level Button

1234

CA-SMC30

20cm

Vari-focal, DC Auto Iris Lens Adjustments

10 •

Connections

•11

Down

Left R

ightRight

H Series / SD Series WD Series

1234

Down

Left R

ightRight

H Series / SD Series WD Series

Service Monitor Output

H Series

DC Auto Iris Lens

Electronic Iris

Flickerless On (1/100sec)

Flickerless Off

Mirror Mode On

Mirror Mode Off

BLC On

BLC Off

OFF

1234DIP Switch Functions

ICR Switch Time(2~3 sec.)

ICR Switch Time(4~5 sec.)

Flickerless On (1/100sec)

Flickerless Off

BLC On

BLC Off

ATW

AWC

OFF

1234DIP Switch Functions

High Resolution

DC Level Button

Dip Switches Service Monitor

Output

SD Series 550TV Lines • Day/Night • IR LEDs

WD Series High Resolution • WDR • Day/Night

Use the five key on switch board of the camera.

12 34

OFF

12 34

OFF

UP key

DOWN key

LEFT key

RIGHT key

CENTER key

2nd VIDEO

WD Series OSD Menu Instructions

12 •

Dip Switch Adjustments

•13

Menu & Setting Details

Main Menu

•DISPLAY ID : ON or OFF

•CAMERA ID : 12 CHARACTER

•ID POSITION : UP-LEFT or UP-CENTER or UP-RIGHT

DWN-LEFT or DWN-CENTER or DWN-RIGHT

•MANUAL

•DC : LEVEL (Range -42 to +20)

•LEVEL (Range -20 to +20)

•ATW

•AWB : PUSH&LOCK

•MANUAL : LEVEL (Range 2,500K to 9,500K)

•OFF

•ON : LEVEL (Range 0 to 38)

•SLOW SHUTTER : AGC LEVEL (Range 0 to 38)

Max. Field : X2, X4, X8, X16, X32

•B&W SS

•GAIN

•INTERNAL

•LINE LOCK : PHASE ADJUST (Range 0 to 620)

•AUTO : COLOR -> BW LEVEL (Range 20 to 31)

B/W -> COLOR LEVEL (Range 0 to 10)

•COLOR

•B/W

•EXIT NO CHANGES

•SAVE NEW AND EXIT

•RESTORE FACTORY SETTINGS

•VERSION INFORMATION

SETUP ID

LENS

WDR

WB CONTROL

AGC

LOW LIGHT

SYNC

DAY / NIGHT

EXIT

OSD Menu Control

CENTER KEY - Used to access menu mode, Also used to confirm the setting

UP / DOWN KEY - Used to choose the desired menu selection.

LEFT / RIGHT KEY - Used to choose the desired menu feature adjustment.

OSD Menu ENTER / EXIT

A. OSD MENU ENTER

• Pushing Center Key for 3 seconds

B. OSD MENU EXIT

• Press EXIT Menu from Main Menu

• When the Center Key is pressed more than 3 seconds from the Main Menu,

it will automatically exit.

C. 'SAVE' and 'QUIT'

• Left or Right Key - Selecting Menu

• Up or Down Key - Returning to Menu

1. Press the SET key, Press the CENTER Key.

2. Select the desired feature using the UP or DOWN key.

3. Change the status of the selected feature using the LEFT or RIGHT key.

WD Series OSD Menu Instructions

14 •

WD Series OSD Menu Instructions

•15

Main Menu F. LOW LIGHT

• SLOW SHUTTER : Control Image brightness by adjusting the shutter speed

- AGC : shutter speed setting( Range 28 to 48)

- MAX FIELD : Shutter open from Min. x2 to Max. x32 filed accumulation period.

• B&W SS (Black and White Slow Shutter)

• GAIN : To get brighter picture.

G. SYNC

• INTERNAL : Internal synchronization

• LINE LOCK : Phase adjustment may be necessary in multiple camera installations

to prevent picture roll when switching between cameras

H. DAY/NIGHT

• AUTO : For automatic switchover from Color mode to B/W mode.

• B/W : Retain a B/W image at all times

• COLOR : Retain a Color image at all times

I. EXIT MENU

• EXIT NO CHANGES : No change

• SAVE NEW AND EXIT : Save change

• RESTORE FACTORY SETTINGS : Factory default

•SWREV

J. PREVIOUS PAGE

• PREVIOUS PAGE : Return page

WD Series OSD Menu Instructions

16 •

WD Series OSD Menu Instructions

•17

A. SETUP ID

• DISPLAY ID

- ON : The ID name will be displayed in the monitor.

- OFF : The name will not displayed in the monitor.

• CAMERA ID : It can be written to 12 characters.

• ID POSITION : Select on screen position of the camera ID.

B. LENS

• MANUAL : Use When using Manual lens.

• DC : You can control the brightness of the screen and adjust the desired DC

level from -40 to 20.

C. WDR

• WDR (Wide Dynamic Range)

You can adjust the desired WDR level from -20 to 20.

D. WB CONTROL

• ATW (Auto Tracking White Balance)

The camera automatically control the white balance in any environment.

• AWB (Auto White Balance)

Opens the PUSH AWB CONFIRM screen where you save your AWB settings to

have them take effect or select CANCEL.

Auto white balance ensures that color integrity is maintained.

• MANUAL

Users can adjust the colors by adding or reducing the WB level.

You can adjust the desired WB level from 2,500K to 9,500K

E. AGC

• ON : Activate automatic gain control feature.

You can adjust the desired AGC level from 0 to 38dB.

• OFF : Deactivate automatic gain control feature.

The Gimbal mechanism yields maximum rotation and placement as shown below.

Pan

Tilt

Horizontal Rotation 355º

85º

355º

Indoor Color Dome Cameras

Vandalproof Color Dome Cameras

CD-H266 CD-H3895 CD-H922

CV-H266 CV-H3895 CV-H922

•

s (

)

(

)

(

)

Item H Series

H Series

75º

SD Series w/ IR LEDs

Specifications

18 •

3-Axis Gimbal Adjustments

•19

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Nuvico Telecamera di sicurezza

Nuvico

Nuvico Xcel NCT-4M-E2 Manuale utente

Nuvico

Nuvico CF-ED2N Manuale utente

Nuvico

Nuvico EasyTrak SC-P36N Manuale utente

Nuvico

Nuvico Zoom Matic Manuale utente

Nuvico

Nuvico XCEL NCT-4M-OV2 Manuale utente

Nuvico

Nuvico Xcel NCT-8ML2-E21AF Manuale utente

Nuvico

Nuvico Xcel NCT-5ML-E2 Manuale utente

Nuvico

Nuvico CT-2M-P30FHIR Manuale utente

Nuvico

Nuvico Xcel NCT-5ML Series Manuale utente

Nuvico

Nuvico Xcel NCT-8ML-OV21AF Manuale utente

Nuvico

Nuvico Xcel NCT-8ML2-OV2 Manuale utente

Nuvico

Nuvico CV-H2N Manuale utente

Nuvico

Nuvico CB-HDE21N Manuale utente

Nuvico

Nuvico Xcel NCT-5ML-OV2 Manuale utente

Nuvico

Nuvico Xcel NCT-5ML-E21AF Manuale utente

Nuvico

Nuvico Xcel NCT-4M-E31AF Manuale utente

Nuvico

Nuvico CB-HD39N-L Manuale utente

Nuvico

Nuvico Xcel NCT-5ML-OV21AF Manuale utente

Nuvico

Nuvico Xcel NCT-4M-B31AF Manuale utente

Nuvico

Nuvico Xcel NCT-5MLC Manuale utente

Nuvico

Nuvico NCT-4M-MV2A Manuale utente

Nuvico

Nuvico Hybrid HD Manuale utente

Nuvico

Nuvico EasyView 2 CD Series Manuale utente

Nuvico

Nuvico Xcel NTCT-3M-IRPTZ20 Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente