Nvent AFBS-B600 Manuale utente

AFBS-B600

(504971)

549 - 749

525 - 725

507

30-80 30-80 30-80 30-80

30-80mm

Ep Cu : 5-10mm

1000 V ≈

1500 V =

50/60Hz

TECHNICAL SUPPORT

www.nVent.com

IP8460_A

1 OF 2

INSTRUCTION SHEET

nVent, nVent CADDY, nVent ERICO Cadweld, nVent ERICO Critec, nVent ERICO, nVent ERIFLEX, and nVent LENTON are owned by

nVent or its global affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change

specifications without prior notice.

WARNING:

nVent products shall be installed and used only as indicated in nVent product instruction sheets and training materials. Instruction sheets are available at

www.nVent.com

and from your nVent customer service representative.

nVent products must never be used for a purpose other than the purpose for which they were designed or in a manner that exceeds specified load ratings.

All instructions must be

completely

followed to ensure proper and safe installation and performance.

Improper installation, misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property

damage, serious bodily injury and/or death, and void your warranty.

SAFETY INSTRUCTIONS:

All governing codes and regulations and those required by the job site must be observed.

Always use appropriate safety equipment such as eye protection, hard hat, and gloves as appropriate to the application.





AFBS-B600

(504971)

ALP2000

(504980)

SIALP-B

(504991)

ALP2000

(504980)

SIALP-B

(504991)

50 N.m

30-100mm

Ep Cu : 5-10mm

30-100mm

Ep Cu : 5-10mm

Ep. Cu : 10mm

Ep. Cu : 5mm

TECHNICAL SUPPORT

www.nVent.com

IP8460_A

2 OF 2

INSTRUCTION SHEET

nVent, nVent CADDY, nVent ERICO Cadweld, nVent ERICO Critec, nVent ERICO, nVent ERIFLEX, and nVent LENTON are owned by

nVent or its global affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change

specifications without prior notice.

WARNING:

nVent products shall be installed and used only as indicated in nVent product instruction sheets and training materials. Instruction sheets are available at

www.nVent.com

and from your nVent customer service representative.

nVent products must never be used for a purpose other than the purpose for which they were designed or in a manner that exceeds specified load ratings.

All instructions must be

completely

followed to ensure proper and safe installation and performance.

Improper installation, misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property

damage, serious bodily injury and/or death, and void your warranty.

SAFETY INSTRUCTIONS:

All governing codes and regulations and those required by the job site must be observed.

Always use appropriate safety equipment such as eye protection, hard hat, and gloves as appropriate to the application.





Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali nvent Rack e supporto