Nvidia TURING GPU Manuale utente

QUICK START GUIDE

Thank you for choosing the NVIDIA Turing™

graphics card.

This quick start guide covers the NVIDIA T1000, T600, and T400 graphics cards.

Before you begin, review the following Minimum System Requirements list to

ensure your system meets the minimum hardware and software speciﬁcation

for your graphics card.

Minimum System Requirements

> Motherboard

PCI Express x16 slot

> Operating System

• Microsoft Windows 10 (64-bit)

• Linux 64-bit on:

-Red Hat Enterprise Linux 7.x

-SUSE Linux Enterprise Desktop 15.x

-OpenSUSE 15

-Fedora 31

-Ubuntu 18.04

• FreeBSD 11.x

• Solaris 11

> Processor

• Intel Core i5, or Xeon processor or later

• AMD Ryzen, or Epyc class processor or later

> System Memory

Minimum of two (2) GB memory, eight (8) GB or higher recommended

01 MINIMUM SYSTEM

REQUIREMENTS

Included equipment with each NVIDIA Turing graphics card.

!ATTENTION: Static electricity can severely damage electronic components.

Take the following precautions when installing your new NVIDIA Turing

graphics card:

>Before touching any electronic parts, discharge the static electricity from

your body by touching the internal metal frame of your system while it is

unplugged.

>Do not remove your card from the packaging until you are ready to install

it. Whenever you remove a card from your system, always place it back in

the packaging.

>Do not allow clothing or jewelry touch any electronic parts.

>When handling your graphics card, hold it by the edges and avoid touching

any circuitry or the PCIe connector.

02 EQUIPMENT

EQUIPMENT T1000 T600 T400

Quick Start Guide

Support Guide

Mini-DisplayPort-to-DisplayPort Adapter 4 4 3

Low Proﬁle Bracket 1 1 1

1 Remove the current graphics driver installed on the host system.

2 Power down your system.

3 Unplug the power cord from the AC power source.

4 Remove the side panel from your system to gain access to the motherboard.

Note: Reference your speciﬁc computer documents for instructions

on accessing the motherboard in your computer.

5 Remove the existing graphics card if present. If a retention bar is holding

the card in place, remove the screw securing the card.

OR, If there is no existing graphics card, remove the access covers from

the primary x16 PCI Express slot.

The T1000, T600, and T400 are single-slot

cards and only require a single slot.

03 HARDWARE

INSTALLATION

6 Install the card into the primary x16 PCI Express slot. Press gently on the card

until it is seated securely in the slot and reattach the graphics card bracket

retention mechanism.

Install the graphics card into the

primary x16 PCI Express slot.

!Attention: This GPU card should not be installed with the I/O

brackets facing downwards.

7 Secure the card to the system frame using the screw(s) removed

in step 5.

8 Install the side panel removed in step 4.

1 Connect the display cable(s) to your NVIDIA Turing graphics card.

2 Reconnect your power cord to the workstation.

NVIDIA T400

Mini-DisplayPort Connector

NVIDIA T1000/T600

04 CONNECTING TO

THE DISPLAY

Driver Installation

With the hardware installed, it is now time to install the graphics driver.

1 Power up your computer, start Windows or Linux, and login with

an account that has Administrator rights.

Note: Since there is no GPU driver currently loaded, the display may

run at reduced resolution or image quality.

2 Download and install the driver.

• Go to www.nvidia.com/drivers and set the "Product Type"

to NVIDIA RTX / Quadro.

• Use the various drop down menus to select your graphics card,

operating system and then set the “Download Type” to Production Branch.

• Launch the downloaded executable ﬁle, then follow the installer guides

to complete installation.

The installer may require you to reboot your system once the driver

installation is complete.

Congratulations! Your NVIDIA Turing graphics

card is now ready to use!

05 SOFTWARE INSTALLATION

AND CONFIGURATION

Nous vous remercions d’avoir choisi une carte

graphique NVIDIA Turing™.

Ce guide de démarrage rapide traite des cartes graphiques NVIDIA T1000,

T600 et T400. Avant de commencer, veuillez consulter la conﬁguration système

minimale pour vous assurer que votre système correspond aux spéciﬁcations

matérielles et logicielles requises par votre carte graphique.

Conﬁguration système minimale

> Carte mère

Emplacement PCI Express x16

> Système d’exploitation

• Microsoft Windows 10 (64-bit)

• Linux 64-bit on:

-Red Hat Enterprise Linux 7.x

-SUSE Linux Enterprise Desktop 15.x

-OpenSUSE 15

-Fedora jusqu'à la version 31

-Ubuntu 18.04

• FreeBSD 11.x

• Solaris

> Processeur

• Intel Core i5, Xeon ou plus

• AMD Ryzen, Epyc ou plus

> Mémoire système

Au moins 2 Go de mémoire (8 Go ou plus est recommandé)

01 CONFIGURATION

SYSTÈME MINIMALE

Équipement fourni avec chaque carte graphique

NVIDIA Turing.

!ATTENTION : L'électricité statique peut sévèrement endommager les

composants électriques. Veuillez prendre les précautions suivantes lors de

l'installation de votre carte graphique NVIDIA Turing:

>Avant de toucher toute pièce électronique, pensez à décharger l’électricité

statique de votre corps en touchant le châssis métallique de votre système

préalablement à sa mise sous tension.

>Ne retirez pas la carte graphique de son emballage avant d'être prêt(e)

à l'installer. Dès que vous retirez une carte graphique de votre système,

placez-la systématiquement dans son emballage.

>Ne laissez pas des vêtements ou des bijoux toucher des pièces électroniques.

>Lorsque vous manipulez votre carte graphique, tenez-la par ses côtés et

évitez de toucher ses circuits ou son connecteur PCIe.

02 ÉQUIPEMENT

ÉQUIPEMENT T1000 T600 T400

Guide de démarrage rapide

Guide d’assistance

Adaptateur Mini DisplayPort-

DisplayPort 4 4 3

Support Low Proﬁle 1 1 1

Indice

Lingue:

Altri manuali Nvidia Hardware per computer

Nvidia

Nvidia TESLA K20 Manuale utente

Nvidia

Nvidia MCP 78S Manuale utente

Nvidia

Nvidia Tesla C870 Manuale utente

Nvidia

Nvidia A800 40GB Active Manuale utente

Nvidia

Nvidia Mellanox ConnectX-5 Manuale utente

Nvidia

Nvidia Jetson TX2 NX Manuale utente

Nvidia

Nvidia JETSON NANO Istruzioni per l'installazione

Nvidia

Nvidia Mellanox ConnectX-5 Manuale utente

Nvidia

Nvidia DGX A100 Manuale utente

Nvidia

Nvidia Jetson Orin NX Guida

Nvidia

Nvidia Mellanox ConnectX-6 Dx Series Manuale utente

Nvidia

Nvidia Quadro PLEX 7000 Manuale utente

Nvidia

Nvidia Mellanox ConnectX-6 Dx Series Manuale utente

Nvidia

Nvidia PCI Express Series Manuale utente

Nvidia

Nvidia GeForce FX Series Manuale utente

Nvidia

Nvidia GeForce3 Ti200 Manuale utente

Nvidia

Nvidia GeForce GTX 980 Manuale utente

Nvidia

Nvidia SP5200BLT Manuale utente

Nvidia

Nvidia TESLA C2050 Manuale utente

Nvidia

Nvidia nForce 680I LT SLI Istruzioni per l’uso

Nvidia

Nvidia GEFORCE RTX 4090 Manuale utente

Nvidia

Nvidia RTX 6000 Manuale utente

Nvidia

Nvidia UFM 4.0 Istruzioni per l’uso

Nvidia

Nvidia Mellanox ConnectX-5 Manuale

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente