Nylex 5L Manuale utente
PRODUCT MANUAL
Shoulder Sprayer
5L & 8L
Contents
A. Pump Handle with lance holder
B. Safety Valve
C. Spray Bottle
D. Pump Assembly
E. Fibreglass lance with two nozzle options
(fan and cone spray patterns)
F. Trigger Assembly
G. Hose
H. Shoulder strap
I. Liquid ID tag
A
B
C
D
E
F
G
H
I
Liquid Identification Tag
The Nylex shoulder sprayer is supplied with a liquid identification
tag which allows you to quickly and easily identify what substance is
inside your sprayer.
The liquid identification tag comes with pre-determined inserts or you
can personalise your own inserts by writing with permanent marker
onto the blank inserts supplied.
The inserts are fitted into the tag by simply opening the tag,
positioning the insert so that the text is facing upwards and clicking
the lid of the tag back into position.
Safety Instructions
Always wear protective clothing including safety glasses and gloves
when using this sprayer.
This sprayer is designed for domestic use only and is to be used with
water based liquids only.
Liquids used with sprayers can be dangerous; if swallowing or skin
contact occurs, always refer to the safety instructions of the liquid
used or contact the poisons information centre or a doctor
immediately.
Avoid spraying in windy conditions.
Store out of direct sunlight and away from children.
Always release pressure before filling, cleaning or storing.
Operating Instructions
Preparation:
Before filling, release any pressure built up
within the bottle by lifting the safety valve.
Unscrew and remove the pump by turning
the handle in an anti-clockwise direction.
Fill the bottle with liquid to the desired level.
Do not exceed the maximum capacity level
marked on the bottle.
Screw the pump handle back into position
by turning the handle in a clockwise direction.
Ensure all fittings are tightened before
proceeding.
1
2
3
4
Operating Instructions
Spraying:
Cleaning:
Pressurise the bottle by pumping the lever up
to 30 times. Do not over pressurise.
Air will escape through the safety valve if the
pressure is too high.
Spray the desired area by holding down the
trigger on the nozzle. The trigger can be
locked for continual spraying.
Choose the type of nozzle according to your
spraying application.
Ensure that pressure is released and that all
sprayer components are rinsed thoroughly
with water after use. This can be achieved by
filling the bottle with clean water, pressurising
and then emptying via the nozzle.
2.5 Bar
6
Max.30
OFF
ON
7
2.5 Bar
5
9
8
Guarantee
Cyclone Tools Pty Ltd
ABN: 63 004 235 063
317 Abbotts Road, Dandenong South,
VIC, 3175, Australia
Australia Free Call: 1800 335 019
Website: www.nylexwatering.com.au
www.nylexwatering.co.nz
The Nylex brand is licensed to
Cyclone Tools Pty Ltd by Nylex Plastics Pty Ltd.
2 YEAR GUARANTEE*
*Cyclone Tools guarantees that this product will be free from defects in workmanship and materials for the
period of 2 years from the date of purchase. If a defect in material or workmanship becomes evident during
that period Cyclone Tools will, at its option, either:
• replace the product; or
• refund to the customer the purchase price paid by the customer for the product.
In the event of such a defect, the product should be returned to the place of purchase, together with proof
of purchase and prior to the date that is 3 months from the end of the guarantee period, for replacement or
refund. Any handling and transportation (and other expenses incurred in claiming under this guarantee) are
not covered by this guarantee and will not be borne by Cyclone Tools.
The obligation of Cyclone Tools under this guarantee is limited to the circumstances set out above and is
subject to:
• the product not having been altered, tampered with or otherwise dealt with by any
person in a manner other than as intended in respect of the relevant product; and
• the product not having been used or applied in a manner that is contrary to customary usage or
application for the relevant product or contrary to any stated instructions or specification of Cyclone Tools.
In addition to other rights and remedies that may be available under law, our goods come with guarantees
that cannot be excluded under Australian Consumer Law (for consumers in Australia) and the Consumer
Guarantees Act (for consumers in NZ). If you are a consumer in Australia, you are entitled to a replacement
or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure. If you are a consumer in New Zealand, we will comply with our obligations
to you under the Consumer Guarantees Act.
Cyclone Tools Pty Ltd, ABN 89 169 427 061
317 Abbotts Road, Dandenong South, Victoria 3175, Australia
Ph: (613) 8791 9300
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Nylex Spruzzatore di vernice
