Oakley FUSE BOX Manuale utente

TABLE OF CONTENTS

ENGLISH 2-11

DEUTSCH 12-21

ESPAÑOL 22-31

FRANCAIS 32-41

ITALIANO 42-51

JAPANESE 52-6v1

MAGYAR 62-71

PORTUGUÊS 72-81

2 | OAKLEY FUSE BOX™INSTRUCTION MANUAL

OAKLEY FUSE BOX™

A Swiss Made timepiece with gold-plated nine-jewel movement, Fuse Box™puts amps into attitude with a monolithic

design and a uniquely rendered dial face. The sculptural strap is honed from pure Unobtainium®rubber and matched

with an inlaid stainless steel chassis, protected by a pure sapphire crystal. This Oakley instrument is engineered for

simple, intuitive operation. It features a date display, a dedicated hand for a second time zone, and a 12-hour alarm

with a dedicated hand. Crafted for those who define originality, Fuse Box™blows the circuit on conventional ideas of

wristwatch style.

OAKLEY FUSE BOX™INSTRUCTION MANUAL | 3

The crown can be pulled out to two click positions. The

first click position is for setting the date. The second click

position is for setting the time.

To set the timepiece for the first time (or to reset the date

and time after the battery is replaced), do the following:

1. Pull the crown out to the first click position (a).

2. Turn the crown clockwise until yesterday’s date appears.

3. Pull the crown out to the second click position (b).

4. Turn the hands counterclockwise until today’s date

appears, then continue forward until the current time

is reached. If the current time is in the afternoon or

evening, move the hour hand all the way around the

dial to pass 12 o’clock noon.

5. Push the crown back in.

To set the exact second, wait until the hand on the

second-counting sub-dial (at the right of the main dial

face) points straight up before you pull out the crown

to the second click position (b). Set the time then wait

until the exact second is reached before pushing the

crown back in.

SETTING THE TIME

Hour Hand

Minute Hand

Date

Second Hand

a b

Crown

4 | OAKLEY FUSE BOX™INSTRUCTION MANUAL

TO SET THE TIME

1. Pull the crown out to the second click position (b).

2. Turn the crown until you reach the correct time.

3. Push the crown back in.

TO SET THE DATE

1. Pull the crown out to the first click position (a).

2. Turn the crown clockwise until you reach the correct date.

3. Push the crown back in.

TO ADJUST THE TIME AND DATE FOR SUBSEQUENT SETTINGS, USE THESE SHORT PROCEDURES

Hour Hand

Minute Hand

Date

Second Hand

a b

Crown

OAKLEY FUSE BOX™INSTRUCTION MANUAL | 5

A dedicated hand (the uppermost hand) indicates the

time for a second time zone. To set the hand for the

second time zone indicator, do the following, and use the

outer markings on the dial face to read the time:

1. Pull the crown out to the first click position (a).

2. Press button “A” to advance the hand for the second

time zone indicator. Press and hold for continuous,

rapid advance of the hand.

3. Push the crown back in.

Second Time

Zone Hand

Button “A”

SETTING THE SECOND TIME ZONE

Crown

6 | OAKLEY FUSE BOX™INSTRUCTION MANUAL

A dedicated hand (the lowermost hand) indicates the

time setting for the alarm. The alarm can be set up to 12

hours in advance. Use the inner time scale on the main

dial face when setting the alarm.

TO SET THE ALARM

1. Pull the crown out to the first click position (a).

2. Turn the crown counterclockwise until the alarm hand

reaches the desired time. Note: Do not rotate the

crown clockwise as it will change the date.

3. Push the crown back in.

TO USE THE ALARM

t 6TFCVUUPOi#wUPDPOUSPMUIFBMBSN5PUVSOUIFBMBSN

function ON, press and hold button “B” until you hear

two beeps. To turn the alarm function OFF, press and

hold button “B” until you hear one beep.

t 8IFOZPVIFBSUIFBMBSNUPOFQSFTTCVUUPOi#wUP

stop the alarm.

t 5IFBMBSNTPVOETGPSBQQSPYJNBUFMZTFDPOET

If button “B” is not pressed during this period, the

alarm will sound again after 1.5 minutes. If button

“B” is not pressed during this second alarm, the

alarm will shut off automatically.

t Note: If button “B” is pressed while the alarm tone is

sounding, the alarm function is turned off automatically.

USING THE ALARM

Alarm Hand

Crown

Button “B”

OAKLEY FUSE BOX™INSTRUCTION MANUAL | 7

LOW BATTERY INDICATOR

5IFCBUUFSZMJGFTQBOJTBQQSPYJNBUFMZUISFFZFBST8IFOUIFTFDPOEIBOECFHJOTUPNPWFBUGPVSTFDPOEJOUFSWBMTUIF

timepiece will continue to keep accurate time, but will run down in approximately one month. If this occurs, replace

the battery.

STORAGE MODE

To maximize battery life during storage, the timepiece is engineered with an interrupter that disconnects the quartz

tuner. To activate the power-saving Storage Mode, pull out the crown to the second click position.

BATTERY REPLACEMENT

The miniature battery that powers the timepiece is designed to last approximately 39 months (35 months with alarm

use of 20 seconds per day). However, because the battery is inserted at the factory for extensive performance checks,

its actual life, once in your possession, may be less.

Battery replacement may be performed only by an Authorized Oakley Service Center. Any attempt to open the watch

case by persons other than Authorized Oakley Service Professionals will void the product warranty.

8JUIJOUIF6OJUFE4UBUFTDBMM0BLMFZHMPCBMIFBERVBSUFSTBUUPGJOEBO"VUIPSJ[FE0BLMFZ5JNFQJFDF

Service Professional near you. Customers outside the United States should contact their local Authorized Oakley

Timepiece Dealer or visit the Oakley website at www.oakley.com for the number of the nearest Oakley distributor.

CLEANING

Failure to keep the case and bracelet clean may result in a skin rash. Use a soft, clean cloth to wipe off any moisture

that adheres to the case or bracelet.

8 | OAKLEY FUSE BOX™INSTRUCTION MANUAL

COMPOSITION

CASE BODY.................................................................................................................................................Stainless steel

CASE BACK.................................................................................................................................................Stainless steel

MANUFACTURING................................................................High-precision Computer Numeric Control (CNC) machining

CRYSTAL.............................................................................................................................................................. Sapphire

BRACELET.................................................................................................................Impact-forged stainless steel buckle

SPECIFICATIONS

MOVEMENT..................................................................................................................Swiss Made, gold plated, 9-jewel

TYPE OF OSCILLATOR ............................................................................................................................Quartz tuning fork

FREQUENCY OF OSCILLATOR.......................................................................................................... 32,768 cycles per sec.

ACCURACY ....................................................................................................................................... +15/-15 sec. per mo.

THERMAL OPERATING MIN................................................................................................................................0ºC (32ºF)

THERMAL OPERATING MAX........................................................................................................................... 50ºC (122ºF)

BATTERY....................................................................................................... 4JMWFS0YJEF)JHI%SBJO/P438