OCAM M2 Manuale utente
WiFi Security Camera
User Manual
Preparaon Before Use
1. Smartphone/ Tablet PC
2. OCam-M2
3. A Wi-Fi router that can be connected to the Internet.
4. Micro SD memory card is required for recording.
(More than 16GB/Class6 is recommended)
5. Includes:
Version request: iOS 7.0 above / Android 3.0 above
a. OCam power adapter
b. Mount
c. Stand
d. Screws x 3
e. Plasc x 3
Contents
1. Product Introduc!on
1.1 Hardware
1.2 So"ware
2. Se#ng up Camera
3. Add My Carmera
4. Viewing Camera image & screen introduc!on
4.1 Live view
4.2 Introduc!on of live view
4.3 Icon instruc!ons as below
4.3.a Admin privileges
4.3.b Op!ons for sound
4.3.c Recording and Viewing saved images
4.3.d Snap shots and Viewing saved images
4.3.e Full screen and Image Rota!on
5. Connect Other Camera
5.1 To connect to the camera of same network
5.2 To connect to remote camera (not from the same network)
6. Camera Se#ng
6.1 Camera Name
6.2 Delete Carmera
6.3 Video Se#ng
6.4 Advanced Se#ng
6.4.a Mode Se#ng
6.4.b Camera Password Se#ng
6.4.c Se#ng Admin Password
6.4.d Event Viewing
6.4.e Mo!on Detec!on Se#ng
6.4.f Sound Detec!on Se#ng
6.4.g Memory Card Se#ng
6.4.h Recording Se#ng
6.4.i Video Playback
6.4.j System Informa!on
6.5 Mo!on and sound detec!on no!fica!on
6.5.a Mo!on detec!on no!fica!on
6.5.b Sound detec!on no!fica!on
7. Scene Mode Introduc!on
8. Factory Default Recovery
9. Firmware Update
10.Troubleshoo!ng & Support
11. Maintenance
P.1
P.1
P.1
P.2
P.3
P.7
P.7
P.7
P.8
P.8
P.8
P.8
P.8
P.9
P.10
P.10
P.10
P.11
P.11
P.11
P.11
P.12
P.12
P.12
P.13
P.13
P.13
P.14
P.14
P.14
P.15
P.15
P.16
P.16
P.16
P.17
P.19
P.19.
P.20
P.21
1.1 Hardware
OCam Body
Download “OCam” from Google Play/Apple App Store and install
on your smartphone or Tablet PC.
Product name
OCam UID numbers
QR Code
Cer!fica!on numbers
OCam WiFi name
Produc!on numbers
1.2 So#ware
Stand Mount Adapter
UID:AAAABBBBCCCCDDDDEEEE
SSID:OCAM-X1PP78
OCam-M2
S/N:145200030
FCC ID:2AA8WOCAM-M1
UID
UIDUID
Product
Introduc!on
Speaker
Holder socket
Reset bu$on
Status indicator
IR Lights
Memory card slot
Power port
Light sensor
Microphone
1.Product Introduc!on
P.1
UID:AAAABBBBCCCCDDDDEEEE
SSID:OCAM-X1PP78
OCam-M2
S/N:145200030
FCC ID:
2AA8WOCAM-M1
UIDUIDUID
UID
UID
2. Seng up the Camera
1Insert the holder into
the holder socket
Further Explana!on: a"ach the
plas!c anchor to your cement
wall before you mount the camera
on a wall.
(Only used when the wall are hard
like the cement wall)
2
12
Make sure the bo"om
of OCam into the right
posi!on
3Complete
2.2 To fix the camera on the wall, please follow the instruc!on below:
2.3 Connect the product to power (shown below), and wait un!l the
indicator light goes flashing.
If you need to do recording, please insert the Micro SD card.
Seng up the
Camera
2.1 To put the camera on the table, please follow the instruc!on below:
P.2
A"ach the wall mount
to your wall or ceiling
using the screws included
in the box.
Mount your camera
by fing the base into
the wall mount. Micro SD 卡
Mi
3. Add My Camera
Connecng to
the Camera
Step 1. Please wait for 30 seconds a!er the product connects to power.
The indicator light would flash red and blue as picture below.
Step 2. Turn on the WiFi on smartphone or tablet PC and search
“OCAM-XXXXXX” (refer the label on the back of OCam) for
connecng.
The default password is“12345678”
Step 3.Turn on the“OCAM”APP
First me connecon se#ngs
P.3
AT&T
iOS Android
OCAM
Connecng to
the Camera
Step 4. Enter the camera list and choose “ Add My Camera”.
If no OCam device is detected, please quit the APP and go back to Step 2.
Note that for the iOS devices, please click home bu!on to exit APP.
Step 5. Please set the admin password and then click “Next”.
P.4
Camera list
(Please choose the camera)
Info
Add My Camera
Rescan Camera
Connect Other Camera
?
Quick Start Guide
Exit OCam APP and go to Wifi setting
page on your smart phone/tablet,
enable the WiFi and follow the OCam
quick start guide in the box. Re-open
OCam App after your smart phone/
tablet connect to the OCam.
Exit App
Didn't detect any OCam
!
Back Main Next
Setting Admin Password
Admin
Admin password is required when doing
advanced settings
Please set the admin password
Re-enter the admin password
Show password
Connecng to
the Camera
Step 6. Please choose the Wireless Network for connecng OCam.
(“AE-1”in the following example)
Step 7. Please enter the Wireless Network password.
You will see the picture below for entering the incorrect Wireless Network
LAN password. Please go back to Step 6-7 again.
P.5
Please select the WiFi to connect
Back Main Next
AE-1
HOME-2F
ANGEL.CHIH
Enter The WiFi Password
AE-1
Back Main Next
Enter The Password
Show password
Confirm
WiFi password is incorrect
Please re-enter the password
Step 8. Please wait for about 60 seconds for connecng to the Internet.
Click Confirm when connecon is completed.
Connecng to
the Camera
Step 9. Connected camera will be shown in the list.
P.6
Camera list
(Please choose the camera)
Camera Online
UID：888ABCDEFGHIJKLMN888
Info
Add My Camera
Rescan Camera
Connect Other camera
?
In connecting, Please wait 60 seconds
Please do not unplug OCam from power or
close the App until setting completed.
Confirm
The camera setup process completed
4. Viewing Camera image & screen introduction
Viewing Camera image
& screen introduc!on
4.2 Introduc!on of live view
4.1 Click the camera icon in the list for instant image.
(Picture of camera list added)
P.7
Camera list
(Please choose the camera)
Baby Room Online
UID：888ABCDEFGHIJKLMN888
Info
Add My Camera
Rescan Camera
Connect Other camera
?
Ⴞෛ൪ࢬ
Online/LAN
320x180 / FPS:10 / bps: 439Kbps
Online user: 2 / Frame Ratio: 0/84
Baby room
888ABCDEFGHIJKLMN888
Main Scenario mode
SCENE
Indice
Altri manuali OCAM Telecamera di sicurezza
